A hungry bear weighing 700 N walks out on a beam in an attempt to retrieve a basket of goodies hanging at the end of the beam (see figure below). The beam is uniform, weighs 200 N, and is 6.00 m long, and it is supported by a wire at an angle of e = 60.0°. The basket weighs 80.0 N. Goodies (a) Draw a free-body diagram for the beam. (Submit a file with a maximum size of 1 MB.) Choose File No file chosen This answer has not been graded yet. (b) When the bear is at x = 1.00 m, find the tension (in N) in the wire supporting the beam and the components of the force exerted by the wall on the left end of the beam. T = F, = (c) If the wire can withstand a maximum tension of 750 N, what is the maximum distance (in m) the bear can walk before the wire breaks?

A hungry bear weighing 700 N walks out on a beam in an attempt to retrieve a basket of goodies hanging at the end of the beam (see figure below). The beam is uniform, weighs 200 N, and is 6.00 m long, and it is supported by a wire at an angle of e = 60.0°. The basket weighs 80.0 N. Goodies (a) Draw a free-body diagram for the beam. (Submit a file with a maximum size of 1 MB.) Choose File No file chosen This answer has not been graded yet. (b) When the bear is at x = 1.00 m, find the tension (in N) in the wire supporting the beam and the components of the force exerted by the wall on the left end of the beam. T = F, = (c) If the wire can withstand a maximum tension of 750 N, what is the maximum distance (in m) the bear can walk before the wire breaks?

Principles of Physics: A Calculus-Based Text

5th Edition

ISBN:9781133104261

Author:Raymond A. Serway, John W. Jewett

Publisher:Raymond A. Serway, John W. Jewett

Chapter10: Rotational Motion

Section: Chapter Questions

Problem 36P: A crane of mass m1 = 3 000 kg supports a load of mass m2 = 10 000 kg as shown in Figure P10.36. The...

See similar textbooks

Similar questions

A crane of mass m1 = 3 000 kg supports a load of mass m2 = 10 000 kg as shown in Figure P10.36. The crane is pivoted with a frictionless pin at A and rests against a smooth support at B. Find the reaction forces at (a) point A and (b) point B. Figure P10.36
How do you do this? A hungry bear weighing 700 N walks out on a beam in an attempt to retrieve a basket of goodies hanging at the end of the beam (see figure below). The beam is uniform, weighs 200 N, and is 6.00 m long, and it is supported by a wire at an angle of ? = 60.0°. The basket weighs 80.0 N. a) When the bear is at x = 1.00 m, find the tension (in N) in the wire supporting the beam and the components of the force exerted by the wall on the left end of the beam. b) If the wire can withstand a maximum tension of 875 N, what is the maximum distance (in m) the bear can walk before the wire breaks?
As shown below, a sign weighing 434 N is hanging (via a wire) from a uniform 480 N beam of length L. Additionally, the beam is attached to a cable that makes an angle ? (? = 30°) with the beam. WebAssign Plot Determine the tension in the cable and the magnitude & direction of the force the hinge (the orange circle) exerts on the beam.Cable tension = 653.6 N Incorrect: Your answer is incorrect. Hinge force = 815.597 N Direction of hinge force = 46.05 relative to the vertical in quadrant 1 (incorrect)
In the figure, horizontal scaffold 2, with uniform mass m2 = 29 kg and length L2 = 2.3 m, hangs from horizontal scaffold 1, with uniform mass m1 = 54 kg. A 17 kg box of nails lies on scaffold 2, centered at distance d = 0.80 m from the left end. What is the tension T in the cable indicated?
Can you draw a free-body diagram of this problem? Three children are trying to balance on a seesaw, which includes a fulcrum rock acting as a pivot at the center, and a very light board 3.2 m long as shown in the figure. Two playmates are already on either end. Boy A has a mass of 45 kg, and boy B a mass of 35 kg. Where should girl C, whose mass is 25 kg, place herself so as to balance the seesaw?
In the figure below, the uniform 0.60-kN beam is hinged at P. What is the tension in the tie rope? a. 66 N. b. 1 750 N. c. 1 780 N. d. 2 260 N. e. 2 280 N.
An auto magazine reports that a certain sports car has 53% of its weight on the front wheels and 47% on its rear wheels. (That is, the total normal forces on the front and rear wheels are 0.53w and 0.47w, respectively, where w is the car’s weight). The distance between the axles is 2.46 m. How far in front of the rear axle is the car’s center of gravity?
A man stands a distance d = 0.275 m from the left end of a platform as shown in the figure. Assume the platform is uniform, with length L = 2.00 m and mass 35.0 kg, and the weight of the man is 690 N. T1 = 420.37 N , T2 = 770.12 N, T3 = 322.003 N (b). What If? The man now begins to walk to the right. If each of the cables can support a maximum tension of 800 N, which cable fails first? At what location does this occur (measured in m from the left end of the platform)?
a horizontal scaffold, of length 2.00 m and uniform mass 50.0 kg, is suspended from a building by two cables. The scaffold has dozens of paint cans stacked on it at various points. The total mass of the paint cans is 75.0 kg. The tension in the cable at the right is 722 N. How far horizontally from that cable is the center of mass of the system of paint cans?
A uniform horizontal beam 10.0 m long and a mass of 82 kg is attached to support cables on either end. The cable on the left end makes an angle of 120 with x-axis and the cable on the right end makes an angle of 30̊ with the x-axis. If a person of mass 82 kg stands 7 m from the right end, find (a) the magnitude of the tensions TL and TR in the cables.
a ladder 4m long is leaning against a frictionless wall with its lower end 1.6m away from the wall. if the ladder weighs 150n, what forcesdoes it exert on the wall F1 and on the ground F2? show step by step solution with fbd
A 4 kg cat sits on a 30 kg, 4 m long beam that is supported by a cable. She sits 0.5 m in from the right, and the cable is supporting the beam at a point 1 m in from the left. The beam is free to rotate at the hinge. What is the tension in the cable and horizontal and vertical forces exerted by the hinge? What direction do the vertical and horizontal forces point?