a pipe with an outside diameter of 2.5 inches is insulated with 2 inches layer of asbestos ( K= 0.396(btu-in)/(hr-ft-F) followed by a layer of cork 1.5 inches thick ( K= 0.30 (btu-in)/ft (hr-ft-F). if the temperature of the outer surface of the cork and pipe is 90 F and 290 F RESPECTIVELY, calculate the heat loss per 100 ft of insulated pipe in btu/hr
Q: 0.5 mm -300 mm 250 mm A B The normal stress in rod A 132.0918807 132.8734894 156.3217523 177.2688671…
A:
Q: The section of a vertical wall is made up of fiberglass insulation slabs separated by wooden studs.…
A:
Q: h = 30 W/m²K Taj = 20°C h. = 60 W/m²K Tzo =-15°C Fiberglass L=10 cm Plaster board Plywood L=2 cm…
A:
Q: A spherical tank with internal diameter of 2 m made of 2.0-cm-thick stainless steel (k=15 W/m.K) is…
A: Note: As per our guidelines we are supposed to answer only the first 3 sub-parts. Kindly repost…
Q: Hot water at average temperature of 90°C is flowing through a cast iron pipe (k=40 W/mK) whose inner…
A:
Q: On a multi-layered square wall, the thermal resistance of the first layer is 0.005 ° C / W, the…
A: The thermal resistance of first layer is R1=0.005°C/W. The thermal resistance of second layer is…
Q: . Btu/h ft °F) whose inner and outer diameters are 3.5 in. and 4.0 in., respectively, in an…
A:
Q: Steel pipe (outer diameter 100 mm) is covered with two layers of insulation. The inner layer, 40 mm…
A:
Q: Three of the following statements are true, but one is false. Indicate which one is false. A) There…
A: There is no any statement which is false. All the statements are true.
Q: Consider a cylindrical steel pipe of an inner radius of 2.9m, an outer radius of 3.2m, and thermal…
A: Given A cylindrical steel pipeinner radius (r1)=2.9 mouter radius (r2)=3.2 mThermal conductivity…
Q: A 4-m-high and 6-m-wide wall consists of a long 18-cm x 30-cm cross section of horizontal bricks (k…
A: Given, The height of the wall, H=4 m The width of the wall, W=6 m Thermal conductivity of brick,…
Q: Question 1.2:Consider heat loss through the two walls of a house on a winter night. The walls are…
A: In heat transfer through conduction, the heat loss through the wall directly proportional to the…
Q: The rod A has a cross sectional area 2376 mm2, modulus of elasticity 68 Gpa and thermal expansion…
A: Apply the concept of thermal deformation is equal to the axial deformation. Now substitute the…
Q: The section of a vertical wall is made up of fiberglass insulation slabs separated by wooden studs.…
A:
Q: Inconel refers to a class of nickel-chromium-based superalloys that are used in high-temperature…
A:
Q: 6. A steel pipe 1.5-m in length has an inside diameter of 7.6 cm with a wall thickness of 11.6 mm.…
A: calculating the total thermal resistance from the inside surface of the pipe to the outside of the…
Q: The rod A has a cross sectional area 2376 mm2, modulus of elasticity 68 Gpa and thermal expansion…
A:
Q: On a multi-layered rectangular wall, the thermal resistance of the first layer is 0.005 ° C / W, the…
A:
Q: A steel pipe (outside diameter 100 mm) is covered with two layers of insulation. The inside layer,…
A:
Q: Define the following items. 1- Radiation shape factor. 2- Overall heat transfer coefficient. 3-…
A: (1) Radiation shape factor: It can be understand as the fraction of the radiation energy that falls…
Q: Steel pipe (outer diameter 100 mm) is covered with two layers of insulation. The inner layer, 40 mm…
A: Given Data Outer diameter of the steel pipe is: do=100 mm=0.1 m Thickness of the inner layer is:…
Q: A liquid food is being pumped in a 1 cm thick steel pipe. The inside diameter of the pipe is 5 cm.…
A: “Since you have posted a question with multiple subparts, we will solve first three sub parts for…
Q: A hot steam pipe having an inside surface temperature of 250°C has an inside diameter of 8 cm and a…
A: The thermal resistance of a hollow pipe can be calculated using the formula given below as-…
Q: A plane furnace surface at 150°C covered with 1-cm-thick insulation is exposed to air at 30°C, and…
A:
Q: The room of a dwelling receives energy from the sun during the day. The roof temperature becomes too…
A: Given Data Roof temperature, TR= 65°C Ambient temperature, Ta=20°C Length of the roof, L=5m
Q: A 3 inch schedule 40 pipe is covered with two layers of…
A: Given data: 3 inch schedule-40 pipe means nominal diameter is 3 inch and it's outside diameter is,…
Q: 8- One side of a copper block 5 cm thick is maintained at 250 C. The other side is covered with a…
A:
Q: 2. You have a 2.5 m x 10 m, R- 18 effective wall, that includes a window that is 4 m by 2 m that is…
A: Write the given data. Awall=2.5 m×10 m=25 m2Awindow=4 m×2 m=8 m2hwindow=0.43 W/mK
Q: Q2/ An insulated steam pipe having an outside Steam pipe diameter of 30 mm is to be covered with two…
A: Given Thermal conductivity(k1)=5k2 T1 and T2 are fixed Thickness = 20mm=0.02m Outside…
Q: A 10-in-thick, 40-ft-long, and 20-ft-high wall is to be constructed using 9-in-long solid bricks (k…
A:
Q: Steel pipe (outer diameter 100 mm) is covered with two layers of insulation. The inner layer, 40 mm…
A:
Q: Calculate the rate of heat dissipation in watts!
A:
Q: Variation of the surface temperature of a pin fin is shown in the Figure. According to the figure,…
A: Given data
Q: A wall is constructed of two layers of 0.5-in-thick sheetrock (k = 0.10 Btu/h·ft·o F), which is a…
A: It the question it is given as 0.5 in thickness but in image it is 0.7 in thickness so I have taken…
Q: Steel pipe (outer diameter 100 mm) is covered with two layers of insulation. The inner layer, 40 mm…
A: Given The outer diameter of the pipe is do=100 mm. The thickness of inner layer insulation is ti=40…
Q: A PUC is considering a subsidy program to encourage consumers to install improved insulation in…
A: Given data: Insulation program cost = $1,500,000 Saved power = 5,000 MWh carbon dioxide = 1,135…
Q: Determine the resistance having a surface area of 1.14 m2 for a temporary insulating wall of a food…
A:
Q: A cold-storage room is constructed of an inner layer of 14 mm of pine with thermal conductivity of…
A:
Q: Steel pipe (outer diameter 100 mm) is covered with two layers of insulation. The inner layer, 40 mm…
A: Given data: The diameter of the steel pipe, d = 100 mm. The thickness of the inner insulation, t1 =…
Q: 12.6-1. Insulation Needed for Food Cold Storage Room. A food cold storage room is to be constructed…
A: Write the expression of heat loss.
Q: Steel pipe (outer diameter 100 mm) is covered with two layers of insulation. The inner layer, 40 mm…
A: Given The outer diameter of the pipe is do=100 mm. The thickness of inner layer insulation is ti=40…
Q: pipe with an outside diameter of 2.7 inches. insulate with a 2 inches. layer of asbestos (ka =…
A: Given Data
Q: a. Heat loss per hour. = Answer kJ / hour. b. Temperature between insulation layers. = Answer ° C.
A:
Q: (III) Suppose the insulating qualities of the wall of a house come mainly from a 4.0-in. layer of…
A: R value of the brick is Thermal conductivity of brick is 0.84 J/m·s°C R=lk=4 in0.84…
a pipe with an outside diameter of 2.5 inches is insulated with 2 inches layer of asbestos ( K= 0.396(btu-in)/(hr-ft-F) followed by a layer of cork 1.5 inches thick ( K= 0.30 (btu-in)/ft (hr-ft-F). if the temperature of the outer surface of the cork and pipe is 90 F and 290 F RESPECTIVELY, calculate the heat loss per 100 ft of insulated pipe in btu/hr
Trending now
This is a popular solution!
Step by step
Solved in 2 steps with 2 images
- 65. It is required to insulate a kitchen oven with cork board (k = 0.043 W/mK) so that the heat losses from the oven does not exceed 400 W/m² when the inner surface of the oven is at 225°C and the outer surface of the oven is at 40°C. The thickness of insulation required is nearlyThe case-to-ambient thermal resistance of a power transistor that has a maximum power rating of 15 W is given to be 25°C/W. If the case temperature of the transistor is not to exceed 80°C, mark the power at which this transistor can be operated safely in an environment at 40°C.. a)Between 1.0 to 1.5 W b)Between 1.5 to 2.0 W c)Between 2.0 to 2.5 WA pipe with an outside diameter of 3.5 in. is insulated with a 3 in. layer of asbestos (ka=0.396 BTU-in/hr- ft2 - 0 F), followed by a layer of cork 1.5 in. thick (kc=0.30 BTU-in/hr-ft2 - 0 F). If the temperature of the outer surface of the cork and pipe is 1000 F and 3000 F, respectively, calculate the heat lost per 100ft or insulated pipe.
- A 3 inch schedule 40 pipe is covered with two layers of insulations. The inner layer (k1 = 0.050) is 2 inches thick and the outer layer (k2 = 0.037) is 1(1/4) inches thick. Calculate the heat loss, in Btu/hr per unit length, if the outer surface temperature of the pipe is 670°F and the outer surface temperature of the outer layer of insulation is 100°F.a pipe with an outside diameter of 2.7 inches. insulate with a 2 inches. layer of asbestos (ka = 0.396 btu-in./hr-ft-F), followed by a layer of cork 1.5 inches. thick (kc = 0.30 btu-in/hrft-F). if the temperature of the outer surface of the cork is 91 F, calculate the heat lost per 100 ft of insulate pipe. The temp of the inner surface of the pipe is 275 F.In a multilayered rectangular wall, the thermal resistance of the first layer is 0.005 °C/W, the resistance of the second layer is 0.2° C/W, and for the third layer it is 0.1 ° C/W. The overall temperature gradient in the multilayered wall from one side to another is 70° C. a. Determine the heat flux through the wall. b. If the thermal resistance of the second layer is doubled to 0.4° C/W, what will be its influence in % on the heat flux, assuming the temperature gradient remains the same?
- Q1 / A5 - cm - diameter steel pipe is covered with a 1 - cm layer of insulating material having k = 0.22 W / m . ° C followed by a 3 - cm - thick layer of another insulating material having k = 0.06 W / m . ° C . The system is exposed to a convection surrounding condition of h = 60 W / m² . ° C and T -15 ° C . The outside surface temperature of the steel pipe is 400 ° C . Calculate the heat lost by the pipe - insulation assembly for a pipe length of 20 m . Express in Watts .Clothing made of several thin layers of fabric with trapped air in between, often called ski clothing, is commonly used in cold climates because it is light, fashionable, and a very effective thermal insulator. So it is no surprise that such clothing has largely replaced thick and heavy old-fashioned coats. Consider a jacket made of five layers of 0.1-mm-thick synthetic fabric (k = 0.13 W/m·K) with 1.5-mm-thick air space (k = 0.026 W/m·K) between the layers. Assuming the inner surface temperature of the jacket to be 28°C and the surface area to be 1.25 m2, determine the rate of heat loss through the jacket when the temperature of the outdoors is 0°C and the heat transfer coefficient at the outer surface is 25 W/m2·K. What would your response be if the jacket is made of a single layer of 0.5-mm-thick synthetic fabric? What should be the thickness of a wool fabric (k = 0.035 W/m·K) if the person is to achieve the same level of thermal comfort wearing a thick wool coat instead of a…A cold-storage room is constructed of an inner layer of 11 mm of pine with thermal conductivity of 0.15 W/m K, and an outer layer of 75 mm of concrete with thermal conductivity of 0.75 W/m K. The wall surface temperature is 253 K inside the cold room and 299 K at the outside surface of the concrete. Calculate the heat loss in W per 1 m2. Please keep one decimal and take positive value for the final answer.
- A 10-in-thick, 26-ft-long, and 10-ft-high wall is to be constructed using 9-in-long solid bricks (k = 0.40 Btu/h⋅ft⋅°F) of cross section 7 in × 7 in, or identical-size bricks with nine square air holes (k = 0.015 Btu/h⋅ft⋅°F) that are 9 in long and have a cross section of 1.5 in × 1.5 in. There is a 0.5-in-thick plaster layer (k = 0.10 Btu/h⋅ft⋅°F) between two adjacent bricks on all four sides and on both sides of the wall. The house is maintained at 80°F and the ambient temperature outside is 35°F. Take the heat transfer coefficients at the inner and outer surfaces of the wall to be 1.5 and 6 Btu/h⋅ft2⋅°F, respectively.A 10-in-thick, 26-ft-long, and 10-ft-high wall is to be constructed using 9-in-long solid bricks (k = 0.40 Btu/h⋅ft⋅°F) of cross section 7 in × 7 in, or identical-size bricks with nine square air holes (k = 0.015 Btu/h⋅ft⋅°F) that are 9 in long and have a cross section of 1.5 in × 1.5 in. There is a 0.5-in-thick plaster layer (k = 0.10 Btu/h⋅ft⋅°F) between two adjacent bricks on all four sides and on both sides of the wall. The house is maintained at 80°F and the ambient temperature outside is 35°F. Take the heat transfer coefficients at the inner and outer surfaces of the wall to be 1.5 and 6 Btu/h⋅ft2⋅°F, respectively. Determine the rate of heat transfer through the wall constructed of solid bricks.The 4-mm-thick rear window of an automobile is defogged by passing warm air over its inner surface. Warm air temperature is at T,1 = 40C and corresponding convection coefficient is h1 =30 W/(m2·K). Outer ambient temperature T,2 = 5C and corresponding convection coefficient is h2 = 70 W/(m2·K). The size of the window is 0.5 m (height) 1.5 m (width). A. Draw two thermal circuits (one based on heat rate and one based on heat flux) considering the convection occurring over inner and outer surfaces and the conduction through the window. Show the equations for the thermal resistances in the circuits.B. Determine the total thermal resistance based on heat flux in m2K/W andoverall heat transfer coefficient U in W/m2K. Find the thermal conductivity of glass (sodalime at 300K)C. Determine the inner and outer temperatures of the glass (that are Ts,1 and Ts,2 shown above).