A pipe with an outside diameter of 3.5 in. is insulated with a 3 in. layer of asbestos (ka=0.396 BTU-in/hr- ft2 - 0 F), followed by a layer of cork 1.5 in. thick (kc=0.30 BTU-in/hr-ft2 - 0 F). If the temperature of the outer surface of the cork and pipe is 1000 F and 3000 F, respectively, calculate the heat lost per 100ft or insulated pipe.

A pipe with an outside diameter of 3.5 in. is insulated with a 3 in. layer of asbestos (ka=0.396 BTU-in/hr- ft2 - 0 F), followed by a layer of cork 1.5 in. thick (kc=0.30 BTU-in/hr-ft2 - 0 F). If the temperature of the outer surface of the cork and pipe is 1000 F and 3000 F, respectively, calculate the heat lost per 100ft or insulated pipe.

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter8: Natural Convection

Section: Chapter Questions

Problem 8.39P

See similar textbooks

Similar questions

a pipe with an outside diameter of 2.7 inches. insulate with a 2 inches. layer of asbestos (ka = 0.396 btu-in./hr-ft-F), followed by a layer of cork 1.5 inches. thick (kc = 0.30 btu-in/hrft-F). if the temperature of the outer surface of the cork is 91 F, calculate the heat lost per 100 ft of insulate pipe. The temp of the inner surface of the pipe is 275 F.
a pipe with an outside diameter of 2.5 inches is insulated with 2 inches layer of asbestos ( K= 0.396(btu-in)/(hr-ft-F) followed by a layer of cork 1.5 inches thick ( K= 0.30 (btu-in)/ft (hr-ft-F). if the temperature of the outer surface of the cork and pipe is 90 F and 290 F RESPECTIVELY, calculate the heat loss per 100 ft of insulated pipe in btu/hr
A steel pipe of outside diameter of 0.051 m is insulated with a 0.0064-m thickness of asbestos followed by a 0.0254-m layer of fiber glass. If the pipe wall is 315.6o C and outside insulation is 37.8o C, what is the temperature between the asbestos and fiber glass? kasbestos = 0.166 W/mo C and kfiber glass = 0.0485 W/mo C.
A 1 in. o.d. (outer diameter) tube reactor is insulated with a 3 inch layer of asbestos. If the temperature of the outer surface of the insulation is 100 °F and the rate of heat loss per foot of reactor length is 50 BTU/hr, what must the temperature of the inside of the reactor be? [for asbestos, k = 0.105 BTU/hr ft °F]
The case-to-ambient thermal resistance of a power transistor that has a maximum power rating of 15 W is given to be 25°C/W. If the case temperature of the transistor is not to exceed 80°C, mark the power at which this transistor can be operated safely in an environment at 40°C.. a)Between 1.0 to 1.5 W b)Between 1.5 to 2.0 W c)Between 2.0 to 2.5 W
65. It is required to insulate a kitchen oven with cork board (k = 0.043 W/mK) so that the heat losses from the oven does not exceed 400 W/m² when the inner surface of the oven is at 225°C and the outer surface of the oven is at 40°C. The thickness of insulation required is nearly
A 10-in-thick, 26-ft-long, and 10-ft-high wall is to be constructed using 9-in-long solid bricks (k = 0.40 Btu/h⋅ft⋅°F) of cross section 7 in × 7 in, or identical-size bricks with nine square air holes (k = 0.015 Btu/h⋅ft⋅°F) that are 9 in long and have a cross section of 1.5 in × 1.5 in. There is a 0.5-in-thick plaster layer (k = 0.10 Btu/h⋅ft⋅°F) between two adjacent bricks on all four sides and on both sides of the wall. The house is maintained at 80°F and the ambient temperature outside is 35°F. Take the heat transfer coefficients at the inner and outer surfaces of the wall to be 1.5 and 6 Btu/h⋅ft2⋅°F, respectively.
A 10-in-thick, 26-ft-long, and 10-ft-high wall is to be constructed using 9-in-long solid bricks (k = 0.40 Btu/h⋅ft⋅°F) of cross section 7 in × 7 in, or identical-size bricks with nine square air holes (k = 0.015 Btu/h⋅ft⋅°F) that are 9 in long and have a cross section of 1.5 in × 1.5 in. There is a 0.5-in-thick plaster layer (k = 0.10 Btu/h⋅ft⋅°F) between two adjacent bricks on all four sides and on both sides of the wall. The house is maintained at 80°F and the ambient temperature outside is 35°F. Take the heat transfer coefficients at the inner and outer surfaces of the wall to be 1.5 and 6 Btu/h⋅ft2⋅°F, respectively. Determine the rate of heat transfer through the wall constructed of solid bricks.
A square high-density polyethylene [α = 158×10–6/°C] plate has a width of 250 mm. A 150 mm diameter circular hole is located at the center of the plate. If the temperature of the plate increases by 37°C, determine:
A 4-m-high and 6-m-wide wall consists of a long 18-cm x 30-cm cross section of horizontal bricks (k = 0.72 W/mK) separated by 3-cm-thick plaster layers (k=0.22 W/mK). There are also 2-cm-thick plaster layers on each side of the wall, and a 2-cm-thick rigid foam (k=0.026 W/mK) on the inner side of the wall. The indoor and outdoor temperatures are 22°C and -4°C, and the convection heat transfer coefficients on the inner and the outer sides are h1= 10 W/m2K and h2= 20 W/m2K, respectively.Assuming one-dimensional heat transfer and disregarding radiation, determine the rate of heat transfer through the wall.
65 kg of foodstuff containing 73% water will be dried to 8% moisture content at 85 ° C. In the process of drying at atmospheric pressure, if the first temperature of the food is 23 ° C, calculate the heat energy (kj) required for the drying process (the heat capacity of the food is 3.2 kj / kg ° C and the heat capacity of the water is 4.186kj / kg ° C). A.)92536 B.)105432 C.)118328 D.)12896 E.)126942
There is a 1.20-cm-thick stagnant air pocket. A) What thickness of cork would have the same R-factor as the stagnant air pocket? The thermal conductivity of air is 0.0230 W/m·K and of cork is 0.0460 W/m·K. in cm B) What thickness of tin would be required for the same R-factor as a 1.20-cm-thick stagnant air pocket? The thermal conductivity of air is 0.0230 W/m·K and of tin is 66.8 W/m·K . in m