A sand core used to form the internal surfaces of a aluminum alloy casting experiences a buoyancy force of 25 kg. The volume of the mold cavity forming the outside surface of the casting = 4500 cm3. What is the weight of the final casting? Given that Sand density = 1.6 g/cm3, Al casting density ρ = 2.7 g/cm3

A sand core used to form the internal surfaces of a aluminum alloy casting experiences a buoyancy force of 25 kg. The volume of the mold cavity forming the outside surface of the casting = 4500 cm3. What is the weight of the final casting? Given that Sand density = 1.6 g/cm3, Al casting density ρ = 2.7 g/cm3

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter3: Transient Heat Conduction

Section: Chapter Questions

Problem 3.37P

See similar textbooks

Similar questions

9.) A 40.97-cm cube of ice melts; the liquid water is placed in a spherical container filling it. If the specific volume of ice at 0°C is 1.094 cm³/g and of water is 1.002 cm³/g, compute for the diameter in cm of the spherical container.
A casting made of cast iron weighs 4.7 kg. The riser and gating system add another 2.5 kg to the total metal poured during the operation. The melting temperature of this grade of cast iron = 1180°C, its density = 7.6 g/cm3, specific heat = 0.46 J/g°C, and heat of fusion = 126 J/g. Assume that the specific heat has the same value for solid and molten metal. Compute (a) the unit energy for melting and pouring and (b) the total energy to heat the metal to a pouring temperature of 1300°C from a starting temperature of 25°C. (c) What is the volume of the casting?
A sand core is used to form the internal surfaces of a steel casting experiences a buoyancy force of 23kg .The volume of the mold cavity forming the outside surface of the casting is 5000 cm3 .Determine the weight of the final casting . Ignore consideration of shrinkage .Sand density =1.6g/cm3 ,steel casting density = 7.82 g/cm3
1. A non-uniform is 4.5m long and weighs 640N. It is balance when a 270N weight is hung 0.800m from the light end of the bar and the bar is pivoted at its center. Where is the center of gravity of the bar? 2.Two workers carry a non-uniform beam weighing 730N. The beam is 2.6m long and its center of gravity is 1.1 m from one end. If the workers hold the beam at its end, how much does each worker lift?
1. A 450 mm ice tube with 0.56ft^3/slug specific volume, melts and filled a spherical container. Determine the diameter of the container in inches. 2. If the sp. Volume of a certain is fluid is 0.7848m^3/kg. What is the specific weight (N/m^3)?
A cube of side L whose density is 2 g/cm3 floats submerged up to its half in a liquid density 4 g/cm3 as sample Figure 1. A student pours water with a density of 1 g/cm3 up to that barely covers the bucket like Figure 2 shows. a) Determine the height (h) as a function of L that the cube remains submerged in the liquid density of 4g/cm3 . (Water and liquid do not mix.
According to the National Wildlife Federation, the polar bear is the largest terrestrial carnivore on Earth. Interestingly, these heavy bears spend much of their time roaming on frozen tundra and remarkably thin ice. Assume a polar bear weighs 980 pounds-force . The polar bear has a circular paw circumference of 37.7 inches . Determine the pressure the ice must be able to withstand if the polar bear is standing on its hind legs such that only two paws are in contact with the ice, in units of pounds-force per square inch .
21 - A vertical cylindrical vessel with a diameter of 15 cm and a height of 40 cm is partially filled with 25 cm high water. The cylinder is rotated at a constant speed of 20 rad/s. What is the maximum height difference between the edge and the center of the free surface? a) 11.5cm B) 15cm NS) 5.4cm D) 9.5cm TO) 7.2cm 22 - The water level in a tank is 9.4 m above the ground. At the bottom of the tank, the sprinkler connected to the pipe end faces upwards. The effective pressure at the water surface inside the tank is 300 kPa. Since the system is at sea level, how high does the water coming out of the fountain rise? (ρ=1000 kg/m³) a) 48 meters B) 25m NS) 30m D) 40m TO) 20m
Archimedes established his principle while investigating a suspected fraud in the construction of a crown. The crown was made from an alloy of gold and silver instead of pure gold. Assume that the volume of the alloy was the combined volumes of components (the density of gold is 19.3g⁄(cm^3 ), the density of silver is 10.5g⁄(cm^3 )). If the crown had a weight of 9.81 N in air and 9.10 N in pure water, what percentage of gold (by weight) was it?
) A ship with a displacement tonnage of 5600 tons is floating without an inclination, as KG = 5.5m and GM = 0.5m. is known. A 33-ton load on the center line inside the ship can reach 10m pier and 3m up being moved. In this case, in order to keep the ship inclined, a tank on the port side is used as starboard. Ballast water is transferred to a tank on the side. Horizontal distance between the volume centers of the tanks 6 m What is the amount of ballast water that needs to be transferred?
Chapter 7, Problem 63, there is an 'h' value that is solved when expressing half the width of the Rankine Oval that I am not quite understanding the process by which the value is solved for. Could you break down the process by which h=0.02423 m? It's been a while since I was last in school, so the mathematical method by which 'h' was solved is a little unclear to me.
4. A 50 L petrol tank of mass 25 lb is filled with petrol with relative density (specific gravity) of 0.7. Calculate the mass (in kg) of the filled tank (tank and petrol masses). 5. The average specific gravity of seawater is given as 1.15. What is the pressure at the bottom of a 5000 ft deep sea? 6. What is the height of a mercury column equivalent to a pressure of 7 bar?