A simple pendulum with mass 0.270 kg hangs from string 1.34 m long. (See the figure below.) A leaf blower blows air at it, exerting a constant horizontal drag force Fdrag of magnitude 1.52 N. Find the following.(Assume the pendulum is in mechanical equilibrium.)(a) the tension in the string(b) the angle the pendulum makes with respect to the vertical° from the vertical

A simple pendulum with mass 0.270 kg hangs from string 1.34 m long. (See the figure below.) A leaf blower blows air at it, exerting a constant horizontal drag force F (Assume the pendulum is in mechanical equilibrium.) drag of magnitude 1.52 N. Find the following (a) the tension in the string (b) the angle the pendulum makes with respect to the vertical * from the vertical

A simple pendulum with mass 0.270 kg hangs from string 1.34 m long. (See the figure below.) A leaf blower blows air at it, exerting a constant horizontal drag force F (Assume the pendulum is in mechanical equilibrium.) drag of magnitude 1.52 N. Find the following (a) the tension in the string (b) the angle the pendulum makes with respect to the vertical * from the vertical

Physics for Scientists and Engineers: Foundations and Connections

1st Edition

ISBN:9781133939146

Author:Katz, Debora M.

Publisher:Katz, Debora M.

Chapter16: Oscillations

Section: Chapter Questions

Problem 38PQ

See similar textbooks

Similar questions

A vibration sensor, used in testing a washing machine, consists of a cube of aluminum 1.50 cm on edge mounted on one end of a strip of spring steel (like a hacksaw blade) that lies in a vertical plane. The strips mass is small compared with that of the cube, but the strips length is large compared with the size of the cube. The other end of the strip is clamped to the frame of the washing machine that is not operating. A horizontal force of 1.43 N applied to the cube is required to hold it 2.75 cm away from its equilibrium position. If it is released, what is its frequency of vibration?
Some people modify cars to be much closer to the ground than when manufactured. Should they install stiffer springs? Explain your answer.
A mass of 0.75 kg is attached to a relaxed sprig with k= 2.5 N/m. The mass rests on a horizontal, frictionless surface. If the mads is displaced by 0.33 m, what is the magnitude of the force exerted on the mass by the spring?
A 0.31-kg glider is attached to a horizontal spring with stiffness of 135 N/m. If the equilibrium position is at x = 0, what is the acceleration of the glider at x = 0.09 m?
On the construction site for a new skyscraper, a uniform beamof steel is suspended from one end. If the beam swings back andforth with a period of 2.00 s, what is its length?
A mathematical pendulum of mass 1.0 kg and length 1.0 m is moved by an angle 60° from the vertical axis and then let go. How fast does the wight move at the moment the rope encloses an angle of 30° with the vertical axis?
In the Challenger Deep of the Marianas Trench, the depth of seawater is 10.9 km and the pressure is 1.16×10^8 Pa, (about 1150 atmospheres). If a cubic meter of water is taken to this depth from the surface (where the normal atmospheric pressure is about 1.0×10^5 Pa), what is the change in its volume? Assume that the bulk modulus for seawater is the same as for freshwater 2.2×10^9 Pa. Report in cubic meters.
Here is a pendulum, when theta is equal to zero, what angle does the tension in the 10m long cord become zero, if the 5kg mass at the end of the string has a speed of 10 m/s at its lowest point?
An archer must exert a force of 345 N on the bowstring shown in Figure (a) such that the string makes an angle of ? = 40.0° with the vertical. If the applied force is replaced by a stretched spring as in Figure (b) and the spring is stretched 27.0 cm from its unstretched length, what is the spring constant?
In the physics Lab, you measure a max speed of the pendulum of 0.55m/s. If the maximum deflection angle is 8 degrees, what is the pendulum's length?
A 0.250 kg air-track glider is attached to each end of the track by two coil springs. It takes a horizontal force of 0.900 N to displace the glider to a new equilibrium position, x= 0.110 m. Find the x-coordinate of the glider at time t= 0.610T, where T is the period of the oscillation.
To measure the static friction coefficient between a 1.40-kg block and a vertical wall, a spring (k = 770 N/m) is attached to the block, is pushed on the end in a direction perpendicular to the wall until the block does not slip downward (see figure). If the spring is compressed by 0.048 m, what is the coefficient of static friction?