A solid circular shaft of diameter 100 mm is subjected to an axial stress of 50 MPa. It is further subjected to a torque of 10 kNm. The maximum principal stress experienced on the shaft is closest to
Q: A motor driving a solid circular steel shaft transmits 40 kW of power at 500 rpm. If the diameter of…
A:
Q: A solid bar of circular cross section has a diameter of 40mm and length of 1300mm. G=80GPa and…
A: Given T = 340Nm. , d = 40mm = 0.04m.
Q: A solid circular shaft transmits 75 kW power at 200 rpm. Calculate the diameter of the shaft and the…
A: Given: Power transmitted by the shaft P=75kWSpeed of the shaft N=200rpmModulus of rigidity…
Q: A propeller shaft is required to transmit 45 kW power at 500 rpm. It is a hollow shaft having inside…
A: Given data Power transmitted = 45 kW Speed (N) = 500 rpm Inside dia (d) = 0.6*outside dia(D)…
Q: solid circular shaft rotates at 200 rpm and transmits power of 112 kW. Calculate the minimum…
A: Given, Rotational speed of shaft = N = 200 rpm Power transmitted = P = 112 kW = 112,000 W Allowable…
Q: composite shaft is made by slipping a bronze tube of 3-in. outer diameter an -in. inner diameter…
A:
Q: Circular solid ACB shaft is fixed supported between the wall at A and B. If the allowable shear…
A: Allowable shear stress τallowable=42 MPa=42×106 N/m2Let the maximum torque applied at section C be…
Q: A solid circular shaft of diameter 60mm is subjected to an axial stress of 20 MPa. It is further…
A:
Q: Q3 A hollow shaft with an external diameter of 160 mm transmits a maximum torque of 16 kN.m. If…
A:
Q: A solid shaft of diameter 30 mm is fixed at one end. It is subjected to a tensile force of 10 kN and…
A: Data given - D = 30 mm = 0.03 m Tensile force Ft = 100 kN Torque T = 60 Nm
Q: Find the required diameter d0 for a solid circle shaft. b) Find the required outer diameter d2 for a…
A: Given: T =1200 NM G=78 GPa Allowable shear stress =40 MPa Allowable rate of twist 0.78/m TO…
Q: A compound steel [G = 80 GPa] shaft consists of a solid 86-mm-diameter segment (1) and a solid…
A:
Q: A hollow shaft for marine applications has outer and inner diameters of 400 mm and 200 mm…
A:
Q: A Cast iron shaft transmits 30kW at 300 rpm. It carries a central load of 1000N and is simply…
A:
Q: A stepped shaft ACB having a solid circular cross sections with two different diameters and two…
A:
Q: Two designs for a shaft are being considered. Both have an outside diamete of 80 m and are 100 cm…
A:
Q: A hollow aluminum shaft with an outside diameter of 80 mm and a wall thickness of 5 mm has an…
A:
Q: a hollow shaft for a rotary compressor is to be designed to transmit maximum torque of 4750 n-m. the…
A: Given Data⇒ Hollow shaft Maximum torque : Tmax=4750 N-m Shear stress in shaft : ζ=50 Mpaζ=50×106Pa…
Q: (a) the maximum shear stress in the shaft; and (b) the angle of twist in degrees. Use G =12 x 106…
A:
Q: : Q2 /A hollow steel shaft transmits 200 kw of power at 150 rpm .The total angle of twist in length…
A:
Q: A 50 mm diameter shaft is transmitting a power of 142.8 HP and is turning at 900 rpm. The shaft is…
A: given data ; diameter = 50 mmpower = 142.8 HP = 142.8 * 746 Wrpm = 900 rpmbending stress =…
Q: A motor boat engine shaft is coupled to the propeller shaft of diameter 30mm. If the allowable shear…
A: Given, Allowable shear stress, τ=43 MPa=43 N/mm2 The diameter of the shaft, d=30 mm
Q: Lets consider a solid circuar shalt subjected to the torque loads as shown. Determine the minimum…
A:
Q: Determine the minimum diameter that can be used for a solid circular steel shaft which is limited…
A:
Q: 2. A composite shaft is subjected to two torques as shown below. Shaft AB is a solid aluminum (G =…
A: Given, Section AB:GAB = 25 GPa = 25000 N/mm2LAB = 400 mmTAB = 800 Nm = 800,000 NmmdAB = 36 mmJAB =…
Q: A solid 1.250-in.-diameter steel [G = 11,000 ksi] shaft is subjected to torques TB = 175 lb-ft and…
A:
Q: Calculate the torque T: i. if the shear stress of the brass sleeve in section AB is limited to τb =…
A: Shear stress is defined as the intensity of force acting on the cross sectional area. Shear stress…
Q: solid 22-mm-diameter bronze shaft transmits 13.4 kW at 17 Hz to the propeller of a small sailboat.…
A:
Q: 4m solid core steel shaft with 50 mm diameter is fixed at its ends. It is subjected to a 400 N-m…
A:
Q: Q.4) A composite shaft is subjected to two torques as shown below. Shaft ABC is a hollow…
A:
Q: find the maximum shear stress induced in a solid circular shaft of diameter 150 mm when the shaft…
A:
Q: Consider the case of shafts when subjected to axial loads in addition to combined torsional and…
A:
Q: A Compound Steel (G=80GPA) Shaft consists of a solid 90mm diameter (segment1) and a solid 70mm…
A:
Q: A hollow shaft and a solid shaft constructed of the same material have the same length and the same…
A: Solution-2 The general relation between torque, shear stress, angle of twist of a shaft under…
Q: Q2 /A hollow steel shaft transmits 200 kw of power at 150 rpm .The total angle of twist in length of…
A:
Q: A hollow shaft for a rotary compressor is to be designed to transmit a maximum torque of 4750 N-m.…
A:
Q: A solid shaft has to transmit 120 kW of power at 160 rpm. If the shear stress is not to exceed 60…
A:
Q: A solid circular shaft of steel is transmitting 20 kW of power at 120 rpm. Determine the minimum…
A:
Q: A solid shaft is to transmit 250 kW at 180 rpm. The torsional shear stress is not to exceed 110 MPa.…
A:
Q: 2) The minimum outer diameter required for a hollow shaft if the shaft inner stress of tallow= 75…
A:
Q: A compound shaft consists of brass segment (1) and aluminum segment (2). Segment (1) is a solid…
A:
Q: A solid 1.500-in.-diameter steel [G = 11,000 ksi] shaft is subjected to torques TB = 190 lb-ft and…
A: Given Datad=1.5inG=11,000ksiTB=190 lb-ftTD=140 lb-fta=42 inb=72 inc=36 in
Q: Problem 2
A:
Q: Detailed solution would be appreciated thanks!!. The steel shaft is formed by attaching a hollow…
A:
Q: A solid circular bronze [G = 6,500 ksi] shaft, 4.6 ft long and 1.575 in. in diameter, carries a…
A: Given Data L=4.6 ft G=6500 ksi D=1.575 in T=60 lb.ft
Q: A hollow nickel steel shaft with outside diameter is twice the inside diameter is to transmit 1492…
A:
Q: The shaft assembly is made from a steel tube 1 in. in diameter, which is bonded to a solid brass…
A:
Q: A solid circular shaft of diameter 100 mm is subjected to an axial stress of 50 MPa. It is further…
A: Data given- d = 100 mm T = 10 × 103 N-m = 10 × 106 N- mm Axial stress = 50 MPa
Step by step
Solved in 3 steps
- The stepped shaft shown in the figure is required to transmit 600 kW of power at 400 rpm. The shaft has a full quarter-circular fillet, and the smaller diameter D1= 100 mm. If the allowable shear stress at the stress concentration is 100 MPa, at what diameter will this stress be reached? Is this diameter an upper or a lower limit on the value of D2?A motor driving a solid circular steel shaft with diameter d = 1.5 in, transmits 50 hp to a gear at B, The allowable shear stress in the steel is 6000 psi. Calculate the required speed of rotation (number of revolutions per minute) so that the shear stress in the shaft does not exceed the allowable limit.A full quarter-circular fillet is used at the shoulder of a stepped shaft having diameter D2= 1.0 in. (see figure), A torque T = 500 lb-in. acts on the shaft. Determine the shear stress at the stress concentration for values as follows: D1= 0.7,0.8, and 0.9 in. Plot a graph showing versus D?
- A tubular shaft being designed for use on a construction site must transmit 120 kW at 1,75 Hz, The inside diameter of the shaft is to be one-half of the outside diameter. If the allowable shear stress in the shaft is 45 MPa, what is the minimum required outside diameter d?A thin tubular shaft with a circular cross section (see figure) and with inside diameter 100 mm is subjected to a torque of 5000 N · m. If the allowable shear stress is 42 MPa, determine the required wall thickness t by using (a) the approximate theory for a thin-walled tube and (b) the exact torsion theory for a circular bar.A circular tube AB is fixed at one end and free at the other. The tube is subjected to concentrated torques as shown in the figure. If the outer radius of the tube is 1.5 in, and the thickness is 3/4 in., calculate the strain energy stored in the tube. Let G= 11,800 ksi.
- A stepped shaft ACB having solid circular cross sections with two different diameters is held against rotation at the ends (sec figure). If the allowable shear stress in the shaft is 6000 psi, what is the maximum torque (T0) that may be applied at section C? Find (T0)max if the maximum angle of twist is limited to 0.55º. Let G = 10,600 ksi.What is the maximum power that can be delivered by a hollow propeller shaft (outside diameter 50 mm, inside diameter 40 mm, and shear modulus of elasticity 80 GPa) turning at 600 rpm if the allowable shear stress is 100 MPa and the allowable rate of twist is 3.0°/m?A stepped shaft ABC consisting of two solid, circular segments is subjected to torques T}and T2acting in opposite directions, as shown in the figure. The larger segment of the shaft has a diameter of dv- 2.25 in. and a length Lt= 30 in.; the smaller segment has a diameter d2— 1.75 in. and a length L, = 20 in. The torques are T, = 21,000 lb-in. and fz=10.000 lb-in. (a) Find reaction torque TAat support A. (b) Find the internal torque T(x) at two locations: x = L1/2 and x = L1+ L2/2. Show these internal torques on properly drawn free-body diagrams (FBDs).
- A hollow tube ABCDE constructed of monel metal is subjected to five torques acting in the directions shown in the figure. The magnitudes of the torques are T1= 1000 lb-in., T2= T4= 500 lb-in., and T3= T5= 800 lb-in. The tube has an outside diameter of d2= 1.0 in. The allowable shear stress is 12,000 psi and the allowable rate of twist is 2.0°/ft. Determine the maximum permissible inside diameter d1, of the tube.The propeller shaft of a large ship has an outside diameter 18 in. and inside diameter 12 in,, as shown in the figure. The shaft is rated for a maximum shear stress of 4500 psi. If the shaft is turning at 100 rpm, what is the maximum horsepower that can be transmitted without exceeding the allowable stress? If the rotational speed of the shaft is doubled but the power requirements remain unchanged, what happens to the shear stress in the shaft?A circular aluminum tube subjected to pure torsion by torques T(sec figure) has an outer radius r2equal to 1.5 times the inner radius r1. (a) If the maximum shear strain in the tube is measured as 400 × 10-6 rad, what is the shear strain y1at the inner surface? (b) If the maximum a1lo-abk rate of twist is 0.125 °/m and the maximum shear strain is to be kept at 400 × 10-6 rad by adjusting the torque T, that is the minimum required outer radius ( r2)Min?