A thin 5-ft-wide, right-angle gate with negligible mass is free to pivot about a frictionless hinge at point O, as shown in the figure below. The horizontal portion of the gate covers a 2-ft diameter drain pipe, which contains air at atmospheric pressure. Determine the minimum water depth, h, at which the gate will pivot to allow water to flow into the pipe. Assume w-5 ft. D=2 ft. L=2 ft. 7= Width W Right-angle gate. Hinge. Water D

A thin 5-ft-wide, right-angle gate with negligible mass is free to pivot about a frictionless hinge at point O, as shown in the figure below. The horizontal portion of the gate covers a 2-ft diameter drain pipe, which contains air at atmospheric pressure. Determine the minimum water depth, h, at which the gate will pivot to allow water to flow into the pipe. Assume w-5 ft. D=2 ft. L=2 ft. 7= Width W Right-angle gate. Hinge. Water D

Name: I got Wrong Solution Previous time.Please Re solve it . A thin 5-ft-wi
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: I got Wrong Solution Previous time.Please Re solve it . A thin 5-ft-wide, right-angle gate with negligible mass is free to pivot about a frictionless hinge at point O, as shown in the figure below.The horizontal portion of the gate covers a 2-ft diam

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A 4-m-long quarter-circular gate of radius 4 m and of negligible weight is hinged about its upper edge A, as shown in the figure. The gate controls the flow of water over the ledge at B, where the gate is pressed by a spring. Determine the minimum spring force (in N) required to keep the gate closed when the water level rises to A at the upper edge of the gate.
A 6-m-high, 5-m-wide rectangular plate blocks the end of a 5-m-deep freshwater channel, as shown in Figure. The plate is hinged about a horizontal axis along its upper edge through a point A and is restrained from opening by a fixed ridge at point B.Determine the force exerted on the plate by the ridge.
U - tube is used to pressure the difference in water channel. p1= 1000 kg/m3. The orange fluid in the U - tube has a density: p2= 2000 kg/m3. The height a = 10 cm and h = 15 cm. If the pressure at point ① is 111 kPa, what is the pressure at point ② ?
The cross section of a rectangular AB of width 2.5 m hinged along A is shown in the figurebelow. The weight of the gate is 55 kg, and it is used to retain the water at depth 3.3m.Calculate the minimum force R at B to hold the gate.
A rectangular gate 5 m × 3 m is hinged at its base A and inclined at 60 degree to the horizontal as shown in the figure. To keep the gate in a stable position a counter weight (W) of 5000 kg is attached at the upper end of the gate. Find the depth of water at which the gate begins to fall. The weight of the gate is 2000 kg. Neglect the friction at the hinge and pulley
EMERGENCY!!!! The cover in the figure is hinged at the center O and has a fixed width w = 5 m. The equation for the surface is x = y2 / a (a = 3 m), the depth of the water to the right of the cover (D = 4 m). Find the magnitude of the applied force (Fa) as shown.
A vessel cylindrical in shape and closed at the top and bottom is 300 mm in diameter, 1 m long and contains water up to a depth of 0.8 m. The air above the water surface is at a pressure of 60 kN/m2 . If the vessel is rotated at a speed of 250 r.p.m. about its vertical axis find the pressure head at the bottom of the vessel (i) At the centre, and (ii) At the edge
vessel a, at elevation 2.438m, contains water under 103.4 kpa pressure. Vessel B at elevation 3.658 m, contains a liquid under 68.95 kpa pressure. if the deflection of the differential gage is 305 mm of mercury, with the lower level on the A side at elevation 0.305m, determine the specific gravity of the liquid in vessel B. Ans. 0.500
The flow of water from a reservoir is controlled by an L-shaped gate hinged at point A, as shown in the figure. The mass of the weight at B (a = 4 m to the right of A, b = 3 m above the base) is 5125 kg. If the gate opens when the water height is 1.75 m above the base, determine the width (in meters, not showing) of the gate.
A dam with triangular cross section holds back a body of water. The dam has height h. The dam is made of concrete, which has speci…c gravity 3.1. What is the maximum angle, , for which thedam will not tip over about point O?
A rectangular gate of width "a", length "b" and inclined at an angle "A", with water on one side is shown in the figure. Use a=9.5 ft, b=5ft, z=6.5ft and angle A=55 degrees. (a) Determine the location of the center of the gate from the water surface along the plane of the gate (in feet). (b) Determine the eccentricity (in feet). (c) Determine the location of the center of pressure from the water surface along the plane of the gate (in feet). (d) Determine the vertical distance (in feet) of the center of the gate from the water surface. (e) Determine the total resultant force (in lb) acting on the side of the gate.
A 4-m-long quarter-circular gate of radius 4 m and of negligible weight is hinged about its upper edge A, as shown in the figure. The gate controls the flow of water over the ledge at B, where the gate is pressed by a spring. Determine the minimum spring force (in N) required to keep the gate closed when the water level rises to A at the upper edge of the gate. Round your answer to 2 decimal places.