A waste acid containing 15% nitric acid, 50% sulfuric acid and 35% water is mixed with a stream of concentrated sulfuric acid containing 7% water and another stream of concentrated nitric acid containing 5% water. Determine the amount of each feed stream needed to prepare 10,000 lbs of a mixture containing 54.3% sulfuric acid and 31% nitric acid.

A waste acid containing 15% nitric acid, 50% sulfuric acid and 35% water is mixed with a stream of concentrated sulfuric acid containing 7% water and another stream of concentrated nitric acid containing 5% water. Determine the amount of each feed stream needed to prepare 10,000 lbs of a mixture containing 54.3% sulfuric acid and 31% nitric acid.

Chemical Principles in the Laboratory

11th Edition

ISBN:9781305264434

Author:Emil Slowinski, Wayne C. Wolsey, Robert Rossi

Publisher:Emil Slowinski, Wayne C. Wolsey, Robert Rossi

Chapter6: Properties Of Hydrates

Section: Chapter Questions

Problem 1ASA: A student is given a sample of a pink manganese (II) chloride hydrate. She weighs the sample in a...

See similar textbooks

Similar questions

A pipet is used to transfer 5.00 mL of a 1.25 M stock solution in flask “S” to a 25.00-mL volumetric flask “B,” which is then diluted with DI H2O to the calibration mark. The solution is thoroughly mixed. Next, 3.00 mL of the solution in volumetric flask “A” is transferred by pipet to a 50.00-mL volumetric flask “B” and then diluted with DI H2O to the calibration mark. Calculate the molarity of the solution in volumetric flask “B.”
A pipet is used to transfer 5.00 mL of a 1.25 M stock solution in flask “S” to a 25.00-mL volumetric flask “A,” which is then diluted with DI H2O to the calibration mark. The solution is thoroughly mixed. Next, 2.00 mL of the solution in volumetric flask “A” is transferred by pipet to a 50.00-mL volumetric flask “B” and then diluted with DI H2O to the calibration mark. Calculate the molarity of the solution in volumetric flask “B.”
Part 1: Preparation of the Primary Citric Acid Standard Mass of empty 250-mL glass beaker: 100.7g Mass of 250-mL beaker and anhydrous citric acid First weighing : 103.4 g Second weighing: 106.5 g Third weighing: 106.1 3. Total volume of citric acid solution: 75.0 mL please help me with part Part 1: Preparation of the Primary Citric Acid Standard Mass of Citric Acid _________________________ Volume of Citric Acid Solution ____________ Moles of Citric Acid _________________ (Molar Mass = 192.0 g/mol) Molarity of Citric Acid Solution ____________
Stock iron(II) solution (200Ug mL-1 Fe) ferrous ammonium sulfate hexahydrate mass= 0.1437g, transfer it to a 100 ml beaker. add 15 ml approx of water and 15m1 'approx of dilute sulphuric acid (2M H2SO.). then transfer FeII to 100 ml flask makeup to the mark with water. calculate the moles of ferrous ammonium sulfate hexahydrate solution in unit ug/mL.
What is the molarity of a concentrated solution of sulfuric acid with a specific gravity of 1.84 and 95.0% by weight sulfuric acid? specific gravity = density of substance at certain temp/density of water at 4 degrees C the density of water is 0.999973 g/mL at 4 degrees celsius. Describe how to prepare 3.0 L of 0.100M. I will pipet ______ and add this to 200mL water. The solution will be stirred and diluted to 3L with water.
A student takes the following steps during an experiment: Measure 15mL concentrated HCl (student uses a 50mL graduated cylinder) Weigh -4.0 grams of tert-butyl chloride (student weighs in a 25 mL beaker on balance #3) Transfer HCl and tert-butly chloride to a 125mL separatory funnel (student pours both liquids from their containers in to the funnel) Swirl the sep funnel for 5 minutes, shake and vent for 15 minutes (student shakes and vents as directed) Place the funnel in the ring support and allow layers to separate (student waits, sees a few bubbles in the layers, decides to continue) Drain the lower layer to waste, drain and dry the top layer with CaCl2 (student collects top layer in a small clean beaker and adds CaCl2 to dry) Gravity filter through fluted filter paper into a clean beaker of known mass (student filters as directed) When the student calculates the % yield from the reaction, it is a disappointing 22%. List at least 5 specific sources of error that may have…
TRUE OR FALSE __________ 6. The bowl of the funnel for gravity filtration may be filled to the brim. __________ 7. Transfer liquids and solutions from a reagent bottle or beaker with the aid of a stirring rod. __________ 8. Never touch, taste, or smell a chemical unless specifically told to do so. __________ 9. If uncertain as to how to dispose of a chemical, dumping it into the sink followed by copious amount of water is a safe disposal procedure. __________ 10. A centrifuge machine should be balanced with an even number of centrifuge/test tubes, placed across the rotor from one another, with equal volumes of liquid.
Produce Water mass “X” is known to be a mixture of water masses “1”, “2”, and “3”. Using the data plotted below, calculate the composition of “X” (i.e. determine the fraction from each of the 3 water masses that makes up water mass X). Watermass#1– SF6 =25 S=33.5 Watermass#2– SF6 =75 S=32 Watermass#3– SF6 =50 S=36.5 Water mass X – SF6 =60 S= 34
A given soil sample is subjected for proximate analysis - specifically moisture content and analysis of inorganic matter (or ash) content. A cleaned and tared crucible is weighed in an analytical balance and found to be 4.5015 grams . The soil sample is weighed-in and the crucible, together with the plant sample, measured a total of 6.2525 grams. The set-up is then placed in an oven and dried to 105 degrees Celsius for at least two hours. The setup is cooled to room temperature in a dessicator and then measured to a constant weight of 5.9775 grams. Afterwards, the setup is placed inside the muffle furnace and ignited to 720 degrees Celsius for at least an hour. The set-up is cooled to room temperature again inside the dessicator and then measured to the constant weight of 4.9375 grams. (A) What is the percent moisture in the plant sample? Write the answer in THREE SIGNIFICANT FIGURES. (B) What is the percent volatile (organic) matter in the plant sample? Express answer in THREE…
Ash was estimated in the sample of hay, and the records were as follows, note that the moisture is 18%. Weight of crucible = 14 g Weight of crucible + sample = 15.2 g Weight of crucible + ash = 14.1 g Calculate: i. Ash percentage according to the fresh material ii. Ash percentage according to the dry matter iii. Organic matter percentage according to the dry matter iv. Organic matter percentage according to the fresh material
A rubbing alcohol sample composed of 60% isopropyl alcohol and water was distilled using a simple distillation setup. If the temperature reading is 100°C, what is the composition of the distillate? a. Pure isopropyl alcoholb. Pure waterc. Cannot be determinedd. Water and isopropyl alcohol
A core sample is saturated with an oil (?o = 35oAPI), gas and water. The initial weight of the sample is 224.14 g. After the gas is displaced by water (?w = 1 g/cm3 ), the weight is increased to 225.90 g. The sample is the placed in a Soxhlet distillation apparatus, and 4.4 cm3 water is extracted. After drying the core sample, the weight is now 209.75 g. The sample bulk volume, 95 cm3 is measured in a mercury pycnometer. Find the porosity, water saturation, oil saturation, gas saturation and lithology of the core sample.