I. True or False. Write true if the statement is correct and false if it is incorrect. Use separate paper for your answers. 1. In sterilization process, alcohol solution should be 70%-90%. 2. It is very important to observe safety rules in sanitizing tools and equipment. 3. First thing to do in the preparation of metal implements is to soak the tools in cold soapy water. 4. Remove immediately tools and implements from disinfectant solution. 5. In storing tools and implements keep unclean and dull. 6. All hair, used cotton or other waste materials must be removed from the floor right away, and deposit it in a closed container. 7. Each beautician must wear a washable uniform while serving clients. 8. Only VIP's client must be provided with a freshly laundered towel. 9. Finger bowls must be sanitized before another client use them. 10. All waste materials should be disposed of in an enclosed waste bin fitted with polythene bin liner, durable enough to resist tearing.

I. True or False. Write true if the statement is correct and false if it is incorrect. Use separate paper for your answers. 1. In sterilization process, alcohol solution should be 70%-90%. 2. It is very important to observe safety rules in sanitizing tools and equipment. 3. First thing to do in the preparation of metal implements is to soak the tools in cold soapy water. 4. Remove immediately tools and implements from disinfectant solution. 5. In storing tools and implements keep unclean and dull. 6. All hair, used cotton or other waste materials must be removed from the floor right away, and deposit it in a closed container. 7. Each beautician must wear a washable uniform while serving clients. 8. Only VIP's client must be provided with a freshly laundered towel. 9. Finger bowls must be sanitized before another client use them. 10. All waste materials should be disposed of in an enclosed waste bin fitted with polythene bin liner, durable enough to resist tearing.

Fundamentals Of Analytical Chemistry

9th Edition

ISBN:9781285640686

Author:Skoog

Publisher:Skoog

Chapter8: Sampling, Standardization, And Calibration

Section: Chapter Questions

Problem 8.1QAP

See similar textbooks

Similar questions

When purifying a sample of aspirin that was produced in the lab, the impure aspirin sample should be dissolved in a very cold solvent, so that solid impurities can be filtered and analyzed the next day or the next week. True or False?
Actual volume of water delivered by pipet and Percent error in volumetric pipet
An oil sample had its iodine number determined using the pyridinium tribromide method. The sample and reagents used are as follows: Oil sample: 0.20 mL, density: 0.958 g/mL Pyridinium tribromide: 0.486 g Na2S2O3: 0.1 M, endpoint = 42.17 mL How much pyridinium tribromide was in excess?
Which statement is false regarding labels on chemical containers? a. labels tell the embalmer how the product can cause harm b. lables tell the embalmer what protection needs to be taken c. each label must list all appropriate hazard warnings d. the original manufacturer's label must be replaced by the employer e. each label must have the identitiy of the hazardous chemical
To prepare the solution you would place the solute in a 50.0 ml volumetric flask, and then fill to the mark with water while mixing. This would give a total solution volume of 50.0 ml. The 5.0 solution needs to be diluted to make 10.0 ml of a 2.0% solution. What volume of 5.0% solution should be used? Please answer fast i give you upvote.
Weigh out 5g of table salt. Dissolve it in 50mL of distilled water in a container using a stirrer and label appropriately. Calculate the concentration in terms of percent mass per volume.
For the following questions (Q1-Q5), consider the compound tartrazine (Yellow 5 food dye) that has a chemical formula of C16H9N4Na3O9S2. Ana weighs out 0.1328 g of tartrazine powder on the balance for her experiment and makes a stock solution by dissolving her powder in 500.0 mL of solution. Concentration (µM or µmol/L) Absorbance 0.00 0.001 9.94 0.252 19.9 0.506 29.8 0.738 39.8 1.018 slope (m): 0.02534 1/(µM) y-intercept (b): -0.0009147 Q5. If Ana determines the absorbance of an unknown tartrazine sample to be 0.662, what is the concentration of the sample in µM?
For the following questions (Q1-Q5), consider the compound tartrazine (Yellow 5 food dye) that has a chemical formula of C16H9N4Na3O9S2. Ana weighs out 0.1328 g of tartrazine powder on the balance for her experiment and makes a stock solution by dissolving her powder in 500.0 mL of solution. Concentration (µM or µmol/L) Absorbance 0.00 0.001 9.94 0.252 19.9 0.506 29.8 0.738 39.8 1.018 slope (m): 0.02534 1/(µM) y-intercept (b): -0.0009147 Q4. Calculate the molar extinction coefficient (molar absorptivity) of tartrazine in units of 1/(M·cm). Assume a cuvette path length of 1.00 cm.
Draw a schematic diagram using this information. Preparation of the solution Take about 25-30 ml of distilled water in a beaker and add powdered crude copper sulphate while stirring the solution so that the powder dissolves. Keep adding the powdered sample till a little of it remains undissolved, even if it is stirred thoroughly. Now add 2-3 ml of dil. H2SO4 to make the solution clear. This prevents the hydrolysis of copper sulphate. Filtration of the solution Take a funnel and fix a filter paper in it and clamp it to a stand. Place a china dish under the funnel. The stem of the funnel should touch the wall of the china dish to avoid the solution splashing out. Pour the solution into the funnel over a glass rod and collect the filtrate in a china dish. The insoluble impurities are left in the filter paper as residue. Concentration of the filtrate to crystallisation point Heat the china dish on a sand bath till the solution is reduced to about one-third of its original volume. To…
This is a assignment problem. Read and analyze each problem carefully. Show your complete solution.
Preparations of Solution by Chemical Reaction are classified as extractives. a)true b)false
An unknown sample containing a mixture of NaCl and Na2CO3 was analyzed to determine the % composition of each compound. In the analysis for Na2CO3 (soda ash), the following data were obtained mass of unknown - 0.4436 g conc. of HCl used - 0.25 N initial volume - 0.5 mL final volume - 20.0 mL (MW soda ash) 106.12) 1.) What method was used to determine the concentration of HCl? 2.) What is the net volume of HCl used in the titration? 3.) What is % Na2CO3 in the given sample? NOTE: Round off your answer to a whole number (2 sig fig)