Aluminum-lithium alloys have been developed by the aircraft industry to reduce the weight and improve the performance of its aircraft. A commercial aircraft skin material having a density of 2.55 g/cc is desired. Compute the concentration of Li in wt% that is required. Density of Li and Al are 0.534 and 2.71 g/cc. * 0.0154 O 1.54 O 20.94 O 35.1124

Aluminum-lithium alloys have been developed by the aircraft industry to reduce the weight and improve the performance of its aircraft. A commercial aircraft skin material having a density of 2.55 g/cc is desired. Compute the concentration of Li in wt% that is required. Density of Li and Al are 0.534 and 2.71 g/cc. * 0.0154 O 1.54 O 20.94 O 35.1124

Fundamentals Of Analytical Chemistry

9th Edition

ISBN:9781285640686

Author:Skoog

Publisher:Skoog

Chapter12: Gravimetric Methods Of Analysis

Section: Chapter Questions

Problem 12.15QAP

See similar textbooks

Similar questions

When jump-starting a car with a dead battery, the ground jumper should be attached to a remote part of the engine block. Why?
0.1724g of a mineral containing MnO₂ was dissolved and then treated with excess iodide according to the following unbalanced reaction: MnO2(s) + H+ → Mn²+ + I2 + H₂O The I₂ released was titrated with a solution of Na₂S2O3 0.07320 mol/L, requiring 14.65 mL to reach the point end of degree a) Determine the percentage of MnO₂ in the ore. b) When iodine solutions are used as titrants these are prepared by dissolving 1₂ in concentrated KI. Explain the reason for the need for KI in the preparation of these solutions?
The mercury in a 0.8142-g sample was precipitated with an excess of paraperiodic acid, H5IO6: 5 Hg 2+ + 2 H5IO6 ---> Hg5(IO6)2 (s) + 10 H + The precipitate (MW = 1448.8 g/mol) was filtered, washed free of precipitating agent, dried, and weighed, and 0.4114 g was recovered. Calculate the a) % Hg (200.6 g/mol) b) % Hg2Cl2 (472.1 g/mol)
Determine the percentage Fe in a sample of limonite from the following data:Sample : 0.5000g ; KMnO4 used = 50.00 ml ; 1.000ml of KMnO4 is equivalent 0.005317 g Fe,FeSO4 used = 6.00 ml; 1.000ml FeSO4 is equivalent 0.009200 g FeO ( ans 44.59 %)
When a sample of the aqueous layer with a volume of 12.25 mL is collected, it requires 18.87 mL of a titrant solution of S2O32- with a concentration of 0.01617 M to reach the endpoint. The reaction has a 2:1 mole ratio of thiosulfate to all reducible iodine species. Calculate the concentration of total reducible iodine (in mol/L) in the aqueous layer. Include only the numerical answer (no units).
A piece of an unknown weighing 12.50is placed in 49.7cm of water in a cylinder. The water level increases to 69.0cm3. whats the calculated value for the drnsity of the solid in g ml-1
Fe2O3 is produced from a pyrite concentrate containing 65% by weight of pyrite (FeS2) by total oxidizing roasting according to the following reaction. 5 tons of pyrite concentrate is roasted daily (MA, g / mol; Fe: 56; S: 32; 0: 16; H: 1). 2FeS2 + 11 / 2O2 → Fe2O3 + 4SO2 How much Fe2O3 is produced in 1 day?
An ore containing Fe3O4 was analyzed by dissolving a 1.5419-g sample in concentrated HCl. HNO3 was then added to oxidize any Fe2+ to Fe3+. The Fe3+ was precipitated as Fe(OH)3 by adding NH3. The precipitate was collected by filtration and was finally heated yielding 0.8525 g of Fe2O3. Report the concentration of Fe3O4 in the sample as %(w/w). (Note: the final answer is said to be 53.4%)
A solution containing 0.402 49 g of CoCl2 ? xH2O (a solid with an unknown number of waters of hydration) was exhaustively electrolyzed to deposit 0.099 37 g of metallic cobalt on a platinum cathode by the reaction Co21 1 2e2¡Co1s2. Calculate the number of moles of water per mole of cobalt in thereagent. A good approach is to find moles of Co, moles of CoCl2, mass of CoCl2, and, by difference, mass of H2O in the sample.
In the synthesis of benzoic acid, 3.5 mL of toluene were used and mixed with potassium permanganate solution. In making the potassium permanganate solution, 7 grams of the powder were dissolved in 150 mL of water. The resulting crystals were purified and the yield 1.53 grams. Identify the limiting reagent and compute for the number of moles that it consumed. What is the theoretical yield? What is the percentage yield? MW toluene = 94.14, density=0.87 g/mL , MW KMnO4 = 158, density = 2.7 g/mL , MW Benzoic acid = 122, density = 1.27 g/mL
A 1.1324 g sample of magnetite ore was dissolved in concentrated HCl to give a solution that contained a mixture of Fe2+ and Fe3+. Nitric acid was added and the solution was boiled for a few minutes, which converted all of the iron to Fe3+. The Fe3+ was then precipitated as Fe2O3*xH2O by addition of NH3. After filtration and washing, the residue was ignited at a high temp to give 0.5394 g of pure Fe2O3. What is the percent Fe and the percent Fe3O4 in the sample?
Sample: Commercial bleach Technical specifications:- Composition: sodium hypochlorite (NaClO) and demineralized water;- Active chlorine content: 2.00 to 2.50% (m/m);- Active ingredient: sodium hypochlorite (NaClO).- Approximate density: 1.08 g/ml;- Physical Aspect: Liquid;- Color: Colorless. Note: the active chlorine content refers to the chlorine gas produced from the following reaction:ClO¯ + Cl¯ + 2H+ ⇋ Cl₂(g) + H₂OData:M.A.: H = 1.0079 g/mol; Na = 22.989769 g/mol; S = 32.065 g/mol; I = 126.90447 g/mol; O = 15.9994 g/mol; Cl = 35.453 g/mol. Material available in the laboratory's warehouse: Reagents:Distilled water; standardized solution of sodium thiosulfate (Na₂S₂O₃), at a concentration of 0.0500 mols/L; 20% KI solution; glacial acetic acid and; starch gum (indicator). Glassware:Bechers of all sizes available on the market; 50, 100, 150, 200 and 250 ml Erlenmeyer flasks; 10.00 and 25.00 mL volumetric pipettes; 25.00 mL burette; 25.00, 50.00 and 100.0 mL volumetric flasks. Calculate…