An inverted U-tube manometer is connected to two horizontal pipes A and B through which water is flowing. The vertical distance between the axes of these pipes is 30 cm. When an oil of speciic gravity 0.8 is used as a gauge fluid, the vertical heights of water columns in the two limbs of the inverted manometer (when measured from the respective centre lines of the pipes) are found to be same and equal to 35 cm. Determine the difference of pressure between the pipes.

An inverted U-tube manometer is connected to two horizontal pipes A and B through which water is flowing. The vertical distance between the axes of these pipes is 30 cm. When an oil of speciic gravity 0.8 is used as a gauge fluid, the vertical heights of water columns in the two limbs of the inverted manometer (when measured from the respective centre lines of the pipes) are found to be same and equal to 35 cm. Determine the difference of pressure between the pipes.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Two pipes A & B carries an oil of specific gravities 0.9 & 1.2 respectively. A U tubedifferential manometer is connected between the pipes. The center of the pipe A is 1 mabove the pipe B. The height of oil in right limb is 30 cm. Also, the mercury leveldifference is found in right limb as 10 cm. Find the pressure difference between these twopipes in kPa. Sketch the arrangement neatly.
A U-tube containing mercury (sg = 13.6) has itsright-hand limb open to the atmosphere and the left-handlimb connected to a pipe conveying water under pressure,the difference in the level of mercury in the two limbs being200 mm. If the mercury level in the left-hand limb is 400 mmbelow the pipe's center line, find the pipeline's absolutepressure (kPa). Also, find the new difference in levels ofmercury in the U-tube if the pressure in the pipe falls by 2kPa.
Consider a differential manometer whose ends are connected to two different pipes A andB and containing different liquids at different levels. Let us assume that the pressure at point A is more than that at point B. Oil is in pipe A whose density 800 kg/m³ shows a difference in mercury levels as 100 mm. The height of oil between center of pipe A to the mercury level in left limb is 200 mm. Methanol (relative density 0.791) is in pipe B and the height of Methanol between center of pipe B and mercury level in the right limb is 5 cm. Calculate the difference in pressures at the two points A and B.
The U-tube at both ends is open to the atmosphere. And the liquid between water and oil does not mix on different sidesWhere d = 12.3 mm as shown and a = 67.5 mm, find the density of oil. [Let the water density be 1000 kg / m ^ (3)] and answer in kg / m ^ (3).
Capillary rise in the glass tube used for measuring water level isnot to exceed 0.5 mm. Determine its minimum size, given thatsurface tension for water in contact with air = 0.07112 N/m.
(D1) The client is considering the use of a manometer to measure the differential pressurebetween Tank A and Tank B for operational purposes.a) Given:s.g of A = 1.3s.g of B = 1.7s.g of manometric fluid = 1.9h1 = 1.45m, h2 = 0.75m and h = 0.4mExplain how the manometer depicted can be used to find the differential pressure between Tanks A andB. Additionally give two (2) limitations of using a manometer to measure pressure.
A venturi meter with a throat diameter of 6 cm is fitted in a horizontal pipeline of 12 cm diameter with oil of specific gravity 0.88 flowing from left to the right. The difference in level in the two limbs of a mercury manometer connected to the tapping points read 12 cm and the connecting pipes are filled with the same oil. A. If two pressure gauges are fitted at tapping points, one at the throat and the other in the inlet. Determine the difference between the 2 gage pressure readings in kPa B. Determine the flow in m^3/s neglecting head losses
When measuring small pressure differences with a manometer, one arm of the manometer may be inclined to improve the accuracy of the reading. (The pressure difference is still proportional to the vertical distance and not the actual length of ghr fluid along the tube.) The air pressure in a circular duct is to be measured using a manometer whose open arm is inclined 25 degrees from horizontal. The density of the fluid in the manometer is 900 kg/m³, and the vertical distance between the fluid levels in the two arms of the manometer is 7.8 inches. Determine the gauge pressure of the air in the duct and the length of the fluid column in the inclined arm above the fluid level in the vertical arm.
A simple manometer is used to measure the pressure of oil s.p 0•8 flowing in a pipeline it's right limb is open to the atmosphere and the left limb is connected to the pipe.The centr of the pipe is 9•0cm below the level of the mercury in the right limb.if the difference of the mercury level in the two limbs is 15cm, determine the absolute and the gauge pressures of the oil in the pipe.
Two pipes A & B carries an oil of specific gravities 0.9 & 1.2 respectively. The center of the pipe A is 35 cm above the pipe B. The height of oil in right limb is 40 cm. Also, the mercury level difference is found in right limb as 80 cm. Find 1-The difference of pressure between two pipes (PA-PB) (Unit is in kPa) = 2-Equivalent to Water head in mm =
1. A pressure gauge attached to a pipe is reading 1.34 m of Hg at a place where theatmospheric pressure is 10.33 m of water. The approximate absolute pressure at themountain isa. 930 kPab. 181 kPac. 280 kPad. 100 kPa
Mercury levels in both arms in the system given in the figureDecipher the difference between (X). (lpg = 0.75 t/m3 ).. YAĞ : Oil SU : watter yoğunlukları : density.