An order for a metal fabrication requires production processes from two departments as follows: 1. Laser cutting 2. Folding/bending and welding The laser cutting is costed on a machine hour rate basis and has already been determined to be £2500 for this order Determine the total cost of this fabrication given the following information The bending and welding department requires 30 hours of labour costed at £15 per hour The folding/bending and welding department has an annual overhead of £216k to absorb The total annual labour hours for this department are 3600 hours (overheads are absorbed on this basis) The direct cost of materials for this fabrication is £800. What is the total-production cost of this order? £5550 O £5100 O £3050 O £4750 O £219,759

An order for a metal fabrication requires production processes from two departments as follows: 1. Laser cutting 2. Folding/bending and welding The laser cutting is costed on a machine hour rate basis and has already been determined to be £2500 for this order Determine the total cost of this fabrication given the following information The bending and welding department requires 30 hours of labour costed at £15 per hour The folding/bending and welding department has an annual overhead of £216k to absorb The total annual labour hours for this department are 3600 hours (overheads are absorbed on this basis) The direct cost of materials for this fabrication is £800. What is the total-production cost of this order? £5550 O £5100 O £3050 O £4750 O £219,759

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

In a casting machining company, it takes an operator 30 seconds to load ,15 seconds to unload each machining center. There are several same centers, all working on the same type of part, and the duration of the automatic operation is 1 minute. The travel time between machines is 15 seconds. Given that the cost per hour of the operator $8 and the cost per hour of the machine is $10, using the man-machine diagram, determine the value of the highest production rate for the system
A CNC milling machine has a purchase price of £120,000 and it is considered from an accounting standpoint to be depreciated to zero value over a period of 5 years. If the machine is to be used for 2 shifts with each shift working for 37 hours/ week and 45 weeks/ year. What is the machine cost/ hr which must be charged in order to amortise/repay the costs over the 5 year period? To make the calculation simpler, you can assume that over the 5 year period you will be required to pay back 8% interest on the sum borrowed. Express your answer in § / hour rounded up to the nearest penny
In a factory where there are three shifts: The machine overhead cost is found to be £8.20 / hr, the labour overhead cost is found to be £30.20/hr, and the premises overhead cost is found to be £3.50/hr. Using the principle of overhead costing: If a single component takes 23 minutes to manufacture on the milling machine. What is the cost / part? You should include machine costs, labour costs and premises costs in your answer, but you can neglect material and energy costs. Express your answer in £ rounded up to the nearest penny.
A worker is currently responsible for tending two machines in a machine cluster. The service time per machine is 0.35 min and the time to walk between machines is 0.15 min.The machine automatic cycle time is 1.90 min. If the worker’s hourly rate = $12/hr andthe hourly rate for each machine = $18/hr, determine (a) the current hourly rate for thecluster, and (b) the current cost per unit of product, given that two units are produced byeach machine during each machine cycle. (c) What is the percent idle time of the worker?(d) What is the optimum number of machines that should be used in the machine cluster, ifminimum cost per unit of product is the decision criterion?
An emergency situation has arisen in the milling department, because the ship carrying a certain quantity of a required part from an overseas supplier sank on Friday evening. A certain number of machines in the department must therefore be dedicated to the production of this part during the next week. A total of 1000 of these parts must be produced, and the production cycle time per part = 16.0 min. Each milling machine used for this rush job must first be set up, which takes 5.0 hr. A scrap rate of 2% can be expected. Assume availability = 100%. (a)If the production week consists of 10 shifts at 8.0 hr/shift, how many machines will be required? (b)It so happens that only two milling machines can be spared for this emergency job, due to other priority jobs in the department. To cope with the emergency situation, plant management has authorized a three-shift operation for six days next week. Can the 1000 replacement parts be completed within these constraints?
The annual requirement of rivets at a ship manufacturing company is 2000 kg. The rivets are supplied in units of 1 kg costing Rs. 25 each. If it costs Rs. 100 to place an order and the annual cost of carrying one unit is 9% of its purchase cost, the cycle length of the order (in days) will be_______
The production manager of a manufacturing firm has tracked the average repair and maintenance cost of a machine for 10 years. Cost averages were steady at Rs. 20,000 for the first five years, but have increased consistently by Rs. 5,000 for each of the last 5 years. Draw the cash flow diagram and calculate the equivalent present worth and annual worth of the costs, if interest rate is 6% per annum.
c. The life of a manufactured product is assumed to have gone through eight (8) stages. List and explain all stages using diagrams where necessary.
Q1. Discuss the evaluation guidelines for manufacturing processes.
A toy manufacturing uses 51030 rubber wheels per year for its popular dump truck series. The firm makes its own wheels, which it can can produce at a rate of 800 per day. The toy trucks are assembled uniformly ( at a constant rate ) over the entire year. Carrying cost is $ 1.50 per wheel per year. setup cost for the production run of the wheel is $ 47. The firm operatyes 243 days per year. Determine each of the following: 1-Optimal run size 2-Use your final answer from part 1 to determine minimum total annual cost for carrying and setup 3-Cycle time for the optimal run size 4-Run time
answer shown, please provide steps as symbilically as possible.
Calculate the number of finished goods (output) or N for the manufacturing process illustrated in the next page.