An overhanging beam AC is subjected to a concentrated load and uniformly distributed load as shown in Figure below. Determine (a) reactions at supports A and B and (b) draw the shear force and bending moment diagrams for this beam

An overhanging beam AC is subjected to a concentrated load and uniformly distributed load as shown in Figure below. Determine (a) reactions at supports A and B and (b) draw the shear force and bending moment diagrams for this beam

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter10: Statically Indeterminate Beams

Section: Chapter Questions

Problem 10.4.28P: A propped cantilever beam is subjected to two triangularly distributed loads, each with a peak load...

See similar textbooks

Related questions

Q: he beam shown in the figure carries a distributed load and also a concentrated load. Taking into…

A: Part A) Determine the reaction at support by apply equilibrium condition

Q: A simple beam is shown in Figure Q2(a) has three concentrated loads at the position indicated. The…

A: Given- Diameter (d) = 200 mm Let support reaction at support 1 and 2 be R1 and R2 respectively

Q: y E,I L A cantilever beam with distributed lateral load p as shown above. Given: The deflection and…

A: since there is only one element, the element matrix equation is same as global matrix equation,…

Q: For the beams loaded as shown in the figure, determine the following A Determine the reactions at…

Q: Draw the shear-force and bending-moment diagrams for a simple beam as shown in Figure Q2 with a…

Q: Determine the fixed-end moments (MA andMB) and fixed-end forces (RA and RB) for a beam oflength L…

A: given; lets take reaction force at A=RAlets take reaction force at B=RBweight density=q0AB=LAC=CB=L2…

Q: A simply supported beam of length 30-in diamater 2-in is supported at A and D, subject to load P at…

Q: A beam ABCD with a vertical arm CE is supported as simple beam at A and D as shown in the figure. A…

A: dear student please rate me positive Stay safe stay happy!

Q: Draw the shear-force and bending-momentdiagrams for a simple beam AB supporting twoequal…

A: To draw the shear force and bending moment diagrams of the given figure, we must calculate the…

Q: Beam ABCD represents a reinforcedconcretefoundation beam that supports a uniformload of intensity q1…

A: Given Load, q1 = 3500 lb/ft Length, L = 14 ft Find Shear force VB and bending moment MB

Q: 1. For the beam loaded as shown in the figure, a. draw the free body diagram b. determine the…

Q: Let's consider a simple supported beam subjected to a triangular distributed load and a couple…

Q: A simply supported beam ABC is loaded by a vertical load P acting at the end of a bracket BDE(see…

A: The given diagram for the problem is ,

Q: E,I Mo Problem 1. Acounterclockwise couple Mo is applied to the end of a propped cantilever beam AB…

Q: Draw the shear-force and bending-momentdiagrams for a cantilever beam AB carrying a uniformload of…

Q: Ex: For the T beam subjected to distributed load (W), shown in figure,, the beam material can resist…

Q: A simply supported beam ABC is loaded at theend of a bracket BDE (see figure). Draw…

A: Draw the free-body diagram of beam ABC.

Q: The cantilever beam AC shown in the figure is subjected to a load 1kN at the end A, and an in-plane…

Q: A beam of length L=8.1 m is being designed to support a uniform load of intensity q = 9.7 kN/m. If…

A: Considering the beam, Let the center of the beam is at C, By symmetry bending moment at support is…

Q: The simple beam ACB shown in the figure is subjected to a concentrated load P 30 kips and a…

A: Given: Distributed load (q)=3kips/ftConcentrated load (P)=30kips

Q: The overhanging beam and its cross section is shown in figure (Attached) below; a) Calculate maximum…

A: Data given - overhanging beam with its cross section Udl = 20kN/m P = 20 kN Total length of the…

Q: Write shear and moment equations for the beam loaded as shown in figure below. Also, draw shear and…

Q: Determine the flexural stress and shear stress of a rectangular beam loaded as shown in the figure…

A: Given data: For hallow rectangle the loading diagram is given below

Q: Consider the beam shown in the figure. Suppose that the distributed load w = 650 lb/ft . Follow the…

A: Solution ; As the loading is symmetric, so reaction at the support will be equal :…

Q: 4 KN 4 KN/m 2 KN/m 4m 4m

A: To obtain the reaction forces we must use the three statics equations, which are as under, The…

Q: A beam ABCD with a vertical arm CE issupported as a simple beam at A and D (see figurepart a). A…

A: (a) Draw the free-body diagram.

Q: Q2: For the beam shown in figure below, find the bending stress of beam at point A. When I= 120*10*…

A: Bending equation is given as: MI=σy=ER where, M is the bending moment I is the moment of…

Q: 4.5-3 /Draw the shear-force and bending-moment diagrams for a cantilever beam AB carrying a uniform…

Q: 13 The simple beam AB shown in the figure support. concentrated load and a segment of uniform load.…

Q: Help me i need help for this question The beam ABCD shown in the figure has a cantilever at each…

Q: The flexural rigidity (EI) of a cantilever beam is assumed to be constant over the length of the…

Q: A simply supported wood beam AB with a span length L = 4 m carries a uniform load on intensity 4 =…

A: A pin support will exert both horizontal and vertical components of reaction. The support A is pin…

Q: The simply supported beam AB is subjected to two concentrated load as shown in figure. Determine:…

Q: The beam AB shown in the figure is simplysupported at A and B and supported on a spring ofstiffness…

A: The displacement of a beam or node from its original position is referred to as deflection in…

Q: A simply supported beam with length L = 4.0 m carries a uniform load w = 2.5 kN/m and a concentrated…

Q: 3. For the beam shown below, let wo = 90 N/m and w1 50 N/m. %D Wo | A B -2 m-2 m+3 m 3 m- -2 m…

Q: H.W Draw shear force and bending moment diagrams for a cantilever beam as shown in Figure? I KN/m-…

Q: An indeterminate beam carries a distributed load and concentrated load as shown in the figure. Solve…

A: Solution: Location A, Moment Reaction =-544.8973 (kN-m) Location C, Moment Reaction =…

Q: Determine the shear and moment equations for the beam shown in the figure. Also, draw the shear and…

A: To find: Shear and moment equations. Shear force diagram Bending moment diagram

Q: A beam AB with overhanging is 6 m in length and made from steel as shown in Figure 2. It is…

A: UVL Uniform varying load on the beam as shown in problem figure. This load is in increasing manner…

Q: Let's consider a simple supported beam subjected to a triangular distributed load and a couple…

A: Answer is M(x) = -83.3 X3 - 166.7 X ( N.m)

Q: O. No. 1: A rectangular beam with cross-sectional dimensions b-40 mm and h- 55 mm is subjected to a…

A: As per bartleby guidelines i can solve only one question at one time. kindly upload second question…

Q: A cantilever beam AB of length L and uniform flexural rigidity El is shown in Fig. Q4(a). It is…

A: For the uniformly distributed load on the whole span; Let the origin be at the fixed end, At a…

Q: A propped cantilever beam AB of a length L carries a concentrated load P acting at the position…

A: There are three unknowns (RA, RB, and Rc) and only two equations. This is a statistically…

Q: A cantilever beam with rectangular cross section is loaded as shown in figure. Plot the maximum…

A: given; load=Pwidth=bheight=hlength=L

Q: Figure (a) shows a cantilever box beam that is subjected to a pure bending moment M=3kN.m about the…

Q: Figure 1 shows a cantilever beam ABC that is fixed at point A. It is subjected to a uniformly…

Q: The beam AB, shown in Figure 1a, with length L = 4.5 m is subjected to a uniform distributed load w…

A: A beam is defined as a structural member subjected to transverse shear load during its…

Concept explainers

Bending Moment

In general, we can define the bending moment as the reaction induced when a certain amount of load or force is applied to an element which makes it bend.

Question

An overhanging beam AC is subjected to a concentrated load and uniformly
distributed load as shown in Figure below. Determine (a) reactions at supports A
and B and (b) draw the shear force and bending moment diagrams for this beam

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2: Shear Force and Bending Moment

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps with 4 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

A r o lukI f/frm f «m t ub e of ou t sid e d ia met er ^ and a copper core of diameter dxare bonded to form a composite beam, as shown in the figure, (a) Derive formulas for the allowable bending moment M that can be carried by the beam based upon an allowable stress <7Ti in the titanium and an allowable stress (u in the copper (Assume that the moduli of elasticity for the titanium and copper are Er- and £Cu, respectively.) (b) If d1= 40 mm, d{= 36 mm, ETl= 120 GPa, ECu= 110 GPa, o-Ti = 840 MPa, and ctqj = 700 MPa, what is the maximum bending moment Ml (c) What new value of copper diameter dtwill result in a balanced design? (i.e., a balanced design is that in which titanium and copper reach allow- able stress values at the same time).
Cantilever beam AB carries an upward uniform load of intensity q1from x = 0 to L/2 (see Fig. a) and a downward uniform load of intensity q from x = L/2 to L. Find q1in terms of q if the resulting moment at A is zero. Draw V and M diagrams for the case of both q and qtas applied loadings. Repeat part (a) for the case of an upward triangularly distributed load with peak intensity q0(see Fig. b). For part (b), find q0, instead of q1
A simple beam of length L = 5 m carries a uniform load of intensity q = 5,8 kN/m and a concentrated load 22.5 kN (see figure). (a) Assuming tra]]ow = 110 MPa, calculate the required section modulus S. Then select the most economical wide-flange beam (W shape) from Table F-l(b) in Appendix F, and recalculate S, taking into account the weight of the beam. Select a new beam if necessary. (b) Repeat part (a), but now assume that the design requires that the W shape must be used in weak axis bending (i.e., it must bend about the 2-2 (or y) axis of the cross section).
A counterclockwise moment M0acts at the midpoint of a fixed-end beam ACB of length L (see figure). Beginning with the second-order differential equation of the deflection curve (the bendingmoment equation), determine all reactions of the beam and obtain the equation of the deflection curve for the left-hand half of the beam. Then construct the shear-force and bending-moment diagrams for the entire beam, labeling all critical ordinales. Also, draw the deflection curve for the entire beam.
A fixed-end beam AB of a length L supports a uniform load of intensity q (see figure). Beginning with the second-order differential equation of the deflection curve (the bending-moment equation), obtain the reactions, shear forces, bending moments, slopes, and deflections of the beam. Construct the shear-force and bending-moment diagrams, Labeling all critical ordinales.
The cross section of a rectangular beam having a width b and height h is shown in part a of the figure. For reasons unknown to the beam designer, it is planned to add structural projections of width b/9 and height d/9 the top and bottom of the beam (see part b of the figure). For what values of d is the bending-moment capacity of the beam increased? For what values is it decreased?
Two identical, simply supported beams AB and CD are placed so that they cross each other at their midpoints (sec figure). Before the uniform load is applied, the beams just touch each other at the crossing point. Determine the maximum bending moments (mab)max* and (MCD)max beams AB and CD, respectively, due to the uniform load if the intensity of the load is q = 6.4 kN/m and the length of each beam is L = 4 m.
A beam with a channel section is subjected to a bending moment M having its vector at an angle 0 to the 2 axis (see figure). Determine the orientation of the neutral axis and calculate the maximum tensile stress et and maximum compressive stress ecin the beam. Use the following data: C 8 × 11.5 section, M = 20 kip-in., tan0=l/3. See Table F-3(a) of Appendix F for the dimensions and properties of the channel section.
A cantilever beam AB of length L = 6.5 ft supports a trapezoidal distributed load of peak intensity 4, and minimum intensity q/2tthat includes the weight of the beam (see figure). The beam is a steel W 12 × 14 wide-flange shape (see Table F-l(a), Appendix F). Calculate the maximum permissible load q based upon (a) an allowable bending stress eallow = 18 ksi and (b) an allowable shear stress eallow = 7,5 ksi. Note: Obtain the moment of inertia and section modulus of the beam from Table F-l(a).
The beam AB shown in the figure is simply supported at A and B and supported on a spring of stiffness k at its midpoint C. The beam has flexural rigidity EI and length IL. What should be the stiffness k of the spring in order that the maximum bending moment in the beam (due to the uniform load) will have the smallest possible value?
The cross section of a sand wie h beam consisting of aluminum alloy faces and a foam core is shown in the figure. The width b of the beam is 8.0 in, the thickness I of the faces is 0.25 in., and the height hcof the core is 5.5 in. (total height h = 6.0 in). The moduli of elasticity are 10.5 × 106 psi for the aluminum faces and 12.000 psi for the foam core. A bending moment M = 40 kip-in. acts about the z axis. Determine the maximum stresses in the faces and the core using (a) the general theory for composite beams and (b) the approximate theory for sandwich beams.
A beam ABC is fixed at end A and supported by beam DE at point B (sec figure). Both beams have the same cross section and are made of the same material. Determine all reactions due to the load P. What is the numerically largest bending moment in cither beam?