As shown in the figure, Refrigerant 22 enters the compressor of an air conditioning unit operating at steady state at 40°F, 80 lbf/in²and is compressed to 160°F, 200 Ibp/in². The refrigerant exiting the compressor enters a condenser where energy transfer to air as aseparate stream occurs, and the refrigerant exits as a liquid at 200 lbf/in?, 90°F. Air enters the condenser at 80°F, 14.7 Ibf/in² with avolumetric flow rate of 750 ft/min and exits at 110°F. Neglect stray heat transfer and kinetic and potential energy effects, andassume ideal gas behavior for the air.CondenserwwwwwwwAir at T P4=14.7lbfin?(AV),I;=110°Fhn 00 ק = P2| Tz= 160°FP2=200 lb£in_?T;-90°FP3 =200 bf/n ²T2= 60°F= 90°Fpi = 80 brin?Compressor= 40°F1- R22 atIz=40°FP-80 Ibfin_?Determine the mass flow rate of refrigerant, in Ib/min, and the compressor power, in horsepower.

Given: The pressure at state 1, P1 = 80 psf The temperature at state 1, T1 = 40 F The pressure at…

Answered: As shown in the figure, Refrigerant 22…

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

THERMODYNAMICS - Conservation of Mass UPLOAD AND EXPLAIN COMPLETE SOLUTION. Consider steam that enters a turbine at 70 bar, 530oC with a velocity of 64 m/s. The turbine is operating at steady state conditions and the steam leaves the turbine as a dry saturated vapor at 10 bar. The inlet diameter of the turbine is 0.45 m and the outlet diameter is 3.6 m. Determine the mass flow rate of steam through the turbine.
Refrigerant 22 enters the compressor of an air-conditioning unit operating at steady state at 4°C, 5.5 bar and is compressed to 60°C, 14 bar. The refrigerant exiting the com- pressor enters a condenser where energy transfer to air as a separate stream occurs and the refrigerant exits as a liquid at 14 bar, 32°C. Air enters the condenser at 27°C, 1 bar with a volumetric flow rate of 20.25 mº/min and exits at 43°C. Neglecting stray heat transfer and kinetic and potential energy effects, and assuming ideal gas behavior for the air, determine (a) the mass flow rate of refrigerant, in kg/min, and (b) the compressor power, in kilowatt.
Refrigerant 22 enters the compressor of an air-conditioning unit operating at steady state at 40oF, 80 lbf/in.2 and is compressed to 140oF, 200 lbf/ in.2. The refrigerant exiting the compressor enters a condenser where energy transfer to air as a separate stream occurs and the refrigerant exits as a liquid at 200 lbf/in.2, 90oF. Air enters the condenser at 808F, 14.7 lbf/in.2 with a volumetric flow rate of 750 ft3/min and exits at 110oF. Neglecting stray heat transfer and kinetic and potential energy effects, and assuming ideal gas behavior for the air, determinea) The mass flow rate of refrigerant, in lb/min, andb) The compressor power, in horsepower.
Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -12oC with a volumetric flow rate of 0.18 m3/s. Refrigerant exits at 8 bar, 70oC. Changes in kinetic and potential energy from inlet to exit can be ignored.Determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kW. The volume metric flow rate of .05262 m^3/s is correct. My power input is incorrect. See attached
Figure shows a simple vapor power plant operating at steady state with water as the working fluid. Data at key locations are given on the figure. The mass flow rate of the water circulating through the components is 109 kg/s. Stray heat transfer and kinetic and potential energy effects can be ignored. Determine: (a) the mass flow rate of the cooling water, in kg/s. (b) the thermal efficiency. (c) the rates of entropy production, each in kW/K, for the turbine, condenser, and pump. (d) Using the results of part (c), place the components in rank order, beginning with the component contributing most to inefficient operation of the overall system. verl
An industrial process discharges 75.3 kg/s of gaseous combustion products at 204°C, 100 kPa (properties at state 1). As shown in the figure, a proposed system for utilizing the combustion products combines a heat-recovery steam generator with a well-insulated turbine. At steady state, combustion products exit the steam generator at 130°C, 100 kPa, and a separate stream of water enters at 350 kPa, 46°C with a mass flow rate of 150 kg/min. At the exit of the turbine, the pressure is 7.5 kPa and the quality is 88%. Heat is lost from the steam generator at a rate of 93600 kJ/h. The changes in kinetic and potential energies of the flowing streams can be ignored as can the pressure drop for the water flowing through the steam generator. The combustion products can be modeled as air acting as an ideal gas with constant specific heats of Cv= 0.718 kJ/kg-K and Cp=1.005 kJ/kg-K. Use Rair = 0.287 kJ/kg-K. Also, for the compressed liquid, assume the substance is a saturated liquid at the given…
Steam enters a turbine at 30 bar, 300°C (u = 2750 kJ/kg, h = 2993 kJ/kg) and exits the condenser as saturated liquid at 15 kPa (u = 225 kJ/kg. h = 226 kJ/kg). Heat loss to the surrounding is 50kJ/kg of steam flowing through the turbine. Neglecting changes in kinetic energy and potential energy, what is the work output of the turbine (in kJ/kg of steam)?
At steady state, Refrigerant 22 enters (1) the compressor at 40C, 5.5bar and is compressed to 60C, 13.8bar. R-22 exiting (2) the compressor enters a heat exchanger where energy transfer to air as a separate stream occurs and the refrigerant exits (3) as a liquid at 13.5bar, 32C. Air enters (4) the condenser at 27C, 1.0bar with a volumetric flow rate of 21.2m3/min and exits (5) at 43C. Assuming ideal gas behavior for the air and stray heat transfer and kinetic and potential energy effects are negligible, determine the compressor power
A condenser of a thermal power plant operates as a surface heat exchanger, 10,000 kg / h of water vapor enters at 0.5 bar and with a quality of 0.95 and the condensate leaves as a saturated liquid at the same pressure. The cooling water enters the condenser as a separate stream at 1 bar and 20 ° C and exits at 35 ° C without pressure change, assuming steady state operation, determine: a) The temperature of the condensed steam b) The amount of cooling water required in m3 / s c) The heat energy transmitted by the steam to the cooling water in Kw
Air enters a horizontal, constant-diameter heating duct operating at steady state at 280 K, 1 bar, with a volumetric flow rate of 0.25 m3/s, and exits at 325 K, 0.95 bar. The flow area is 0.05 m2.Assuming the ideal gas model with k = 1.4 for the air, determine:(a) the mass flow rate, in kg/s,(b) the velocity at the inlet and exit, each in m/s, and(c) the rate of heat transfer to the air, in kW.
Air enters a compressor operating at steady state at 14.7 lbf/in.2 and 60°F and is compressed to a pressure of 150 lbf/in.2 As the air passes through the compressor, it is cooled at a rate of 10 Btu per lb of air flowing by water circulated through the compressor casing. The volumetric flow rate of the air at the inlet is 5000 ft3/min, and the power input to the compressor is 700 hp. The air behaves as an ideal gas, there is no stray heat transfer, and kinetic and potential effects are negligible. Determine (a) the mass flow rate of the air, lb/s, and (b) the temperature of the air at the compressor exit, in °F.
Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -12oC with a volumetric flow rate of 0.18 m3/s. Refrigerant exits at 8 bar, 70oC. Changes in kinetic and potential energy from inlet to exit can be ignored.Determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kW.

SEE MORE QUESTIONS

Recommended textbooks for you

Elements Of Electromagnetics

Mechanical Engineering

ISBN:

9780190698614

Author:

Sadiku, Matthew N. O.

Publisher:

Oxford University Press

Mechanics of Materials (10th Edition)

Mechanical Engineering

ISBN:

9780134319650

Author:

Russell C. Hibbeler

Publisher:

PEARSON

Thermodynamics: An Engineering Approach

Mechanical Engineering

ISBN:

9781259822674

Author:

Yunus A. Cengel Dr., Michael A. Boles

Publisher:

McGraw-Hill Education

Elements Of Electromagnetics

Mechanical Engineering

ISBN:

9780190698614

Author:

Sadiku, Matthew N. O.

Publisher:

Oxford University Press

Mechanics of Materials (10th Edition)

Mechanical Engineering

ISBN:

9780134319650

Author:

Russell C. Hibbeler

Publisher:

PEARSON

Thermodynamics: An Engineering Approach

Mechanical Engineering

ISBN:

9781259822674

Author:

Yunus A. Cengel Dr., Michael A. Boles

Publisher:

McGraw-Hill Education

Control Systems Engineering

Mechanical Engineering

ISBN:

9781118170519

Author:

Norman S. Nise

Publisher:

WILEY

Mechanics of Materials (MindTap Course List)

Mechanical Engineering

ISBN:

9781337093347

Author:

Barry J. Goodno, James M. Gere

Publisher:

Cengage Learning

Engineering Mechanics: Statics

Mechanical Engineering

ISBN:

9781118807330

Author:

James L. Meriam, L. G. Kraige, J. N. Bolton

Publisher:

WILEY

SEE MORE TEXTBOOKS