At the instant shown in (Figure 1). rod AB has an angularvelocity w AB = 2.4 rad/s and an angular accelerationAB= 10 rad/s². The collar at C is pin-connected to CDand slides over AB.Figure60⁰°@ABAB0.75 mD0.5 mB1 of 1€Determine the angular velocity of rod CD at this instant.Express your answer in radians per second to three significant figures. Enter positive value if the directionof velocity is counterclockwise and negative value if the direction of velocity is clockwise.|Π|ΙΑΣΦΗΤΗWCD=SubmitPart Bacd=Request AnswerSubmitDetermine the angular acceleration of rod CD at this instant.Express your answer in radians per second squared to three significant figures. Enter positive value if thedirection of acceleration is counterclockwise and negative value if the direction of acceleration is clockwise.IVD ΑΣΦΗRequest Answervec< Return to Assignmentvec[w]) ?Provide Feedbackrad/spwo ?rad/s²

The angular velocity of the rod AB is ωab=2.4k⇀ rad/s. The angular acceleration of the rod AB is…

At the instant sh an ang velocity wAB = 2.4 rad/s and an angular acceleration AB= 10 rad/s². The collar at C is pin-connected to CD and slides over AB. Figure AB CAB 0.75 m D 0.5 m 1 of 1 Determine the angular velocity of rod CD at this instant. Express your answer in radians per second to three significant figures. Enter positive value if the direction of velocity is counterclockwise and negative value if the direction of velocity is clockwise. WCD= Submit Part B acd= 196]ΑΣΦΗ. Η Submit Request Answer Determine the angular acceleration of rod CD at this instant. Express your answer in radians per second squared to three significant figures. Enter positive value if the direction of acceleration is counterclockwise and negative value if the direction of acceleration is clockwise. ΔΙΑΣΦΗΜ Request Answer vec < Return to Assignment vec ? Provide Feedback rad/s ? rad/s²

At the instant sh an ang velocity wAB = 2.4 rad/s and an angular acceleration AB= 10 rad/s². The collar at C is pin-connected to CD and slides over AB. Figure AB CAB 0.75 m D 0.5 m 1 of 1 Determine the angular velocity of rod CD at this instant. Express your answer in radians per second to three significant figures. Enter positive value if the direction of velocity is counterclockwise and negative value if the direction of velocity is clockwise. WCD= Submit Part B acd= 196]ΑΣΦΗ. Η Submit Request Answer Determine the angular acceleration of rod CD at this instant. Express your answer in radians per second squared to three significant figures. Enter positive value if the direction of acceleration is counterclockwise and negative value if the direction of acceleration is clockwise. ΔΙΑΣΦΗΜ Request Answer vec < Return to Assignment vec ? Provide Feedback rad/s ? rad/s²

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The constant angular acceleration of the rotating disk is 12 rad/s . The angular velocity of the disk is 24 rad/s clockwise when t = 0. Determine the total angle turned by the disk between t = 0 and t = 4sec. the answer is 48 rad. show your solution.
The disk with radius r = 0.2 m (figure below) starts from rest and receives an angular acceleration at clockwise given by alfa= (3t3)rad/s2, where t is given in second. That said, for t = 3 s determine: (a) the angular velocity of the disk (b) the velocity intensity of a point P on the edge of the disk. Represent the direction of the velocity vector at point P indicated in the figure (c) the intensities of the normal and tangential components of the acceleration of a point P in the edge of the disc. Plot the direction of these acceleration components at the indicated point P in the figure
A cyclist pedals constantly at 7.9587 rad/s the wheels are 336.5mm in radius. If the chain is directly connected with the sprockets which are 76 mm in radius (front sprocket) and 35mm in radius (rear sprockets), Determine the angular speed of the wheel in rad/s.
Two inclined shafts are connected by means of a universal joint. The speed of the driving shaftis 1000 £p.m. If the total fluctuation of speed of the driven shaft is not to exceed 12.5% of this, what is the maximum possible inclination between the two shafts? With this angle, what will be the maximum acceleration to which the driven shaft is subjected and when this will occur ? [Ans. 20.4° ; 1570 rad/s? ; 41.28°]
The disk with radius r = 0.09 m is rotating at a constant angular velocity of ω = 0.9 rad/s (counterclockwise) about the fixed pin support at O. For the instant shown, find the relative acceleration component (aB/A)n, where (aB/A)n = {(ax)i+(ay)j} m/s2. Choose the correct answer: a) ax=-0.292; ay=-0.0729 b) ax=0.786; ay=0.196 c) ax=0.292; ay=0.0729 d) ax=0.0182; ay=0.00349 e) ax=-0.786; ay=-0.196
From rest, the motor shaft I rotates to achieve a counter-clockwise angular velocity, ?? = (0.13?3 +3.32?2) rad/s. If no slippage occurs within the system and considering the tabulated given below, determine the velocity and total acceleration of the point 0.3 meter from the center of Disk E, as shown, at ? = 1.22000 second. Also, determine the number of revolutions done by Disk E at the same time.
15.8 The gears A, B, and C, of radii rA=500 mm, rB=200 mm, rC=150 mm, respectively, all rotate around fixed axes parallel to the x-axis shown. At a certain instance, gear A rotates with wA=6i rad/s and gear C rotates with aC=10 rad/s2. Determine wB and aB at this instant.
b) Find the angular velocity and angular acceleration of disc B shown below, which is spinningatthe constant rate of ω2 = 90/πrpm. The disc is attached to collar A, which is rotating at the angular speed of ω1 = 5/π rpm, with the angular speed increasing at 0.5/π rpm/sec. Rod AB which connects the disc to the collar ispinned to the collar at A. The rod makes an angle of θ = 300 with the vertical, which is increasing at a constant rate of20/π0/sec.Express theAngularvelocityAcceleration of the disc in terms of a reference frame attached to thecollar.
Need the answer in 15 minutes, please. Crank AB is 0.500 m long and is rotating counterclockwise at 3.00 rad/s. Rod BD is 1.500 m long. If crank AB is rotating at a constant angular velocity, which body/bodies is/are in general plane motion? Piston D Rod BD Crank AB & Rod BD Crank AB Which of the following gives the closest value of the speed of end B of crank AB? 3 m/s 4.5 m/s 1.5 m/s 3 rad/s
Assuming there is no slippage for the belt assembly below, Determine the following: What is the average angular velocity of each pulley if the rope accelerates from 5 m/s to 10 m/s in 10 s? How many revolutions does the pulley turn in that time? R1 = 0.3 m R2 = 0.2 m R3 = 0.1 m
Please answer this NEATLY, COMPLETELY, and CORRECTLY for an UPVOTE. Arm AB has a clockwise angular velocity ωAB while the ring gear R has a counterclockwise angular velocity ωR. Using the Instantaneous Center (IC) Method, determine (a) the angular velocity (in rad/s) of gear B and (b) the velocity (in cm/s) of gear tooth D at the instant shown. Also, (c) illustrate the location of each rigid body’s instantaneous center. Utilize the following given:s = 13.5 cmrB = 6 cmωAB = 0.55 rad/sωR = 0.16 rad/s
Please answer this NEATLY, COMPLETELY, and CORRECTLY for an UPVOTE. Arm AB has a clockwise angular velocity ωAB while the ring gear R has a counterclockwise angular velocity ωR. Using the Instantaneous Center (IC) Method, determine (a) the angular velocity (in rad/s) of gear B and (b) the velocity (in cm/s) of gear tooth D at the instant shown. Also, (c) illustrate the location of each rigid body’s instantaneous center. Utilize the following given:s = 13.5 cmrB = 6 cmωAB = 0.55 rad/sωR = 0.16 rad/s *for part (c), please follow the proper way of illustrating Instantaneous Centers (IC) on the next picture. Here's the youtube link of the attached picture where the proper illustration of IC was also discussed https://www.youtube.com/watch?v=1aQ9EZGMdDk