Constant operating speed characteristics; H = 55 – 460v² and ng = 8,2 – 130v³ Water is drawn from a pond by means of a centrifugal pump given with equations, and it is pumped into a 25 m high open water reservoir with a flow rate of 0.15 m^3/s. The pipe length used during this process is 130 m and the continuous load coefficient on the pipe is given as 0.024. Since the local load losses in the system are neglected; (Psu= 998 kg/m³)

Constant operating speed characteristics; H = 55 – 460v² and ng = 8,2 – 130v³ Water is drawn from a pond by means of a centrifugal pump given with equations, and it is pumped into a 25 m high open water reservoir with a flow rate of 0.15 m^3/s. The pipe length used during this process is 130 m and the continuous load coefficient on the pipe is given as 0.024. Since the local load losses in the system are neglected; (Psu= 998 kg/m³)

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

(1) the brake power delivered (bp) = 104.846 Kw(2) the brake mean effective pressure (bmep) = 6.867 bar (3) the brake specific fuel consumption (bsfc) = 0.25179 kg/kwhr(4) the brake specific air consumption (bsac) = 3.433kg/kw.h(5) the brake thermal efficiency (b, th) = 32.4%(6) the volumetric efficiency (vol),= 56. 39%(7) the air-fuel ratio (A/F) on mass basis = 13.63Draw the simplified schematic diagram of the plant showing all the necessary data displayed on it. "Please only draw on schematic diagram of the plant"
AB Power Engineering 1.) Discuss the importance of diesel and gasoline engines in the field ofagricultural and biosystems engineering.
They measured ambient temperature 16 deg Cand ambient pressure 1.02 bar, engine RPM 34,863, thrust 6.25 N, air flow 10.4414 /s, fuel flow 4.1992 1/h, gauge combustion pressure 0.0769 bar. The temperature values (deg C) at compressor exit, turbine inlet and exhaust were recorded as 24.02, 840.23, 572.46. Assume density of fuel as 0.8 kg/L. The heating value of fuel is 42,580 kJ/kg. The idea gas constant R is 0.287 kJ/kg K, the Cp value for air is 1.005 kJ/kg Kand the value of specific heat ratio k is 1.4. Estimate static nozzle exit temperature in K under ideal conditions.
Calculate car engine effeciency based on fuel input? Data: Fuel volume= 10% of total Volume CC= 1991 cm^3 4 Cylinders RPM= 2000 min^-1
A 731 KW diesel-engine power plant has the following data: fuel rate, 245 liters per hour at 22 C with a specific gravity of 0.922; coolant flow rate, 1135 liters/min, with inlet and outlet temperature of 25 C and 35 C, respectively; air temperature of 18 C at a volume flow rate of 5031 m°/hr; exhaust gas temperature of 400 C. If the engine is an 8-cylinder, 375 mm x 457 mm x 267 rpm and the generator efficiency is 93 %, conduct an engine heat balance based on the above data.
A 4-cylinder, 4-stroke engine gave the following results when tested on a test bed and the following readings were obtained. • Shaft speed = 4500 rev/min • Fuel consumption = 2.5 g/s • Fuel Calorific Value = 44 MJ/kg • Indicative mean effective pressure = 650 kPa • Piston stroke = 120 mm • Piston bore = 100 mm, • Net Brake Load = 350 N • Torque arm = 0.40 m (Shaft Torque = Net Brake Load × Torque arm) Determine the: (a) Engine indicated power, (b) Brake power, (c) Brake thermal efficiency, (d) Friction power, and (e) Mechanical efficiency.
Students did an experiment on Swansea University jet engine. They measured ambient temperature 16 deg C and ambient pressure 1.02 bar, engine RPM 64,664, thrust 17.5781 N, air flow 42.0557 l/s, fuel flow 8.6914 l/h, gauge combustion pressure 0.2942 bar. The temperature values (deg C) at compressor exit, turbine inlet and exhaust were recorded as 39.84, 869.53, 585.93. Assume density of fuel as 0.8 kg/L. The heating value of fuel is 42580 kJ/kg. The idea gas constant R is 0.287 kJ/kg K, the Cp value for air is 1.005 kJ/kg K and the value of specific heat ratio k is 1.4 Estimate the thrust specific fuel consumption value under ideal conditions (g/N-s) Enter your answer to four decimal places in the box below. answer ASAP would be appreciated
Students did an experiment on Swansea University jet engine. They measured ambient temperature 16 deg C and ambient pressure 1.02 bar, engine RPM 49,042, thrust 11.1328 N, air flow 23.2031 l/s, fuel flow 6.7383 l/h, gauge combustion pressure 0.1599 bar. The temperature values (deg C) at compressor exit, turbine inlet and exhaust were recorded as 31.64, 901.75, 568.35. Assume density of fuel as 0.8 kg/L. The heating value of fuel is 42,580 kJ/kg. The idea gas constant R is 0.287 kJ/kg K, the Cp value for air is 1.005 kJ/kg K and the value of specific heat ratio k is 1.4. What is the maximum fuel (thermal) efficiency for any engine operating between the measured maximum and minimum temperature limits can achieve?
Pls answer thank you! The following is the ultimate analysis of a sample of petrol by weight :C = 84.2 %; H = 15.8 %. Calculate the ratio of air to petrol consumption by weight if the volumetric analysis of the dry exhaust gas is :CO2 = 11.07 %: C0 = 1.23 %: O2 = 3.72 %; N2 = 83.97 %.
Q.12) The compressor of a pneumatic plant provides 20 m3/min of free air at 7 bar gauge. The average systemdemand is 15 m3/min free air at a pressure fluctuating between 6 and 7 bar gauge. A receiver tank is to be placed on the line to buffer the pressure and consumption fluctuations. If the compressor is controlled by starting and stopping , determine the volume of tank which will provide 20 start/stop's per hour. a)15.23 m3 b)21.22 m3 c)18.83 m3 d)11.25 m3 e)12.45 m3
In an undisturbed airstream inside a wind tunnel, the condition is at a standard atmosphere with a velocity of 400 ft/s. The tunnel then narrows down to the throat section. What is the velocity of throat section which has a pressure of 2000 lbs/ft^2? a. 450 ft/s b. 501 ft/s c. 388 ft/s d. 605 ft/s e. 510 ft/s f. 485 ft/s h. 458 ft/s
An IC engine built to generate power on the basis of constant volume combustion cycle is tested for its performance and the following data were noted. Time taken for 30 cc consumption of fuel by engine=50 seconds, Number of cylinders=1, Mean effective pressure=13 bar, Brake load on dynamometer=6kg, Brake drum radius=22 cm, Engine speed =2308 rpm, Stroke volume = 800 cc, Calorific value of fuel=44000kJ/kg, Specific gravity of fuel=0.7, Density of3standard fluid=1000kg/m , IP=40kW.a) Find if the engine used is a 2-stroke engine or 4-stroke engine?b) What is the percentage conversion of combustion heat to useful output power?c) What percent of the power generated inside the cylinder is transmitted as useful power output?d) If the swept volume is increased by 10%, what would be the change in power generatedinside the cylinder if the engine speed and mean effective pressure is assumed to remain the same as before?