Date Name Industry Print Exercise 14-1 Refer to the print PR 14-1 and answer the questions below. 1. How many columns are featured in the revision history block of this drawing? 2. What is the current revision letter assigned to this part? 3. What revision specified the surface texture of the tapered portion? 4. What are the initials of the person who implemented or approved ECO 68-557? 5. Which revision specified the vendor part number of the bushing? 6. Revision F changed the maximum axial deflection to .500 at 2000 pounds. What had it been? 7. Instead of revision D, E, and F being three letters, what other method of marking could have been implemented for these three changes? Review questions based on previous units: 8. What is the thread form specified for the internal threaded holes? 9. What method was used to show external threads on this part? 10. Is this a drawing of multiple parts assembled? 11. Does this drawing feature any cutting-plane lines? 12. What is the radius of the undercut indicated by a local note? 13. What is the maximum material condition diameter of the largest cylindrical feature of this part? 14. This drawing has an italic "f" symbol on some surfaces in the left side view. What are these symbols? What does the 125 near the check mark at revision A on the tapered surface mean? 15 Inc. Unit 14 Drawing Revision Systems 299 100 114 Print supplied by Clark Equipment Company PR 14-1. ASM Silent Block Axle Mounting 4.68 4.62 2.510 2.490 2.510 2.490 1.042 1.022 1.010 066 2.312 2.252 0 ±.020 "D" "B" -12 TAPER PER FOOT GRIND OR MACHINE OPT.(A 13 64 DRILL X 45' CHAMFER BOTH ENDS BE 90 t.010 WITH MOUNTING BOSSES MIN. FLAT .75 BOTH ENDS .28 RWT HOLE MUST 125 2.68+.09 000 5.50 (2.18) (1.62) (1.41) .005 1.020 1.262 1.259 4.26 4.24 1722071 -.09 X 45 CHAMA 2.12 -ø.50 DRILL V.50 FOR ASM OPT. CONST. 1-12 UNF-2A, PD MAX. 1.0691 .92 t.020 THD LENGTH (A MIN. 1.0631 "C" "A" MUST BE FREE OF TOOL MARKS SAE 4140 LEAD ED C.R. OR STRESSPROOF -SAE-R630 BHK,Z D OR SAE-R630 BHZ A Z-DENOTESA HIGH MODULUS STOCK E WITH WEATHER RESISTANCE AND RESISTANCE TO A HYSTERESIS BUILD UP .62 MALLEABLE IRON SAE 32510 A DUCTILE 60-45-10 OPT. +.88 1.75- -18 UNF-3B, PD MAX. .5934 V.03 X 30 2 HOLES NOTE SURFACES "A" & "B" AND "C" & "D" MUST BE PARALLEL AND IN SAME PLANE DEFLECTION SPEC.: MAX. RADIAL DEFLECTION .050 AT 4000 POUNDS MAX. AXIAL DEFLECTION 500 AT 2000 POUNDS BREAK ALL SHARP CORNERS SIMILAR TO 329676 MICRO UNLESS OTHERWISE SPECIFIED MAX. INDUSTRIAL TRUCK DIVISION OR .010 CHANGES CHG. VENDORS DAYTON RUBBER CO BUSHINGS INC. NO. 3221 C DATE BY TOL. ON FIN. DIMS ALL OTHER DIMENSIONS OR DO NOT SCALE SCALE MATERIAL FILM ON CLARK EQUIPMENT CO. BATTLE CREEK, MICHIGAN NOTED ASM SILENT BLOCK 20 JAN HT. TREATMENT WAS .250 Z NOTE ADDED D WAS SAE-R-630-BHKZ 23 DEC JCS CNO. ADDED WAS 1 MIN. THD A ADDED 16 JAN JCS AXLE MOUNTING HARDNESS DRAWN FOR 13 JAN JCS ea 68-557 67-971 67-651 22 MAY DRAWN BY 16 OCT CHECKED BY 26 JUL RELEASED BY 20 THRU 50 M. BRESSON DATE DATE 12 APR DATE DATE 16 MAY MB 1722071 11 OCT MB MB RN67-393

Elements Of Electromagnetics
7th Edition
ISBN:9780190698614
Author:Sadiku, Matthew N. O.
Publisher:Sadiku, Matthew N. O.
ChapterMA: Math Assessment
Section: Chapter Questions
Problem 1.1MA
icon
Related questions
Question

I need answers to questions 13, 14, and 15 pertaining to the print provided.

Note: A tutor keeps putting 1 question into 3 parts and wasted so many of my questions. Never had a issue before until now, please allow a different tutor to answer because I was told I am allowed 3 of these questions.

Date
Name
Industry Print Exercise 14-1
Refer to the print PR 14-1 and answer the questions below.
1. How many columns are featured in the revision history block of this drawing?
2. What is the current revision letter assigned to this part?
3. What revision specified the surface texture of the tapered portion?
4. What are the initials of the person who implemented or approved ECO 68-557?
5. Which revision specified the vendor part number of the bushing?
6. Revision F changed the maximum axial deflection to .500 at 2000 pounds. What had it been?
7. Instead of revision D, E, and F being three letters, what other method of marking could have been
implemented for these three changes?
Review questions based on previous units:
8. What is the thread form specified for the internal threaded holes?
9. What method was used to show external threads on this part?
10. Is this a drawing of multiple parts assembled?
11. Does this drawing feature any cutting-plane lines?
12. What is the radius of the undercut indicated by a local note?
13. What is the maximum material condition diameter of the largest cylindrical feature of this part?
14. This drawing has an italic "f" symbol on some surfaces in the left side view. What are these symbols?
What does the 125 near the check mark at revision A on the tapered surface mean?
15
Inc.
Transcribed Image Text:Date Name Industry Print Exercise 14-1 Refer to the print PR 14-1 and answer the questions below. 1. How many columns are featured in the revision history block of this drawing? 2. What is the current revision letter assigned to this part? 3. What revision specified the surface texture of the tapered portion? 4. What are the initials of the person who implemented or approved ECO 68-557? 5. Which revision specified the vendor part number of the bushing? 6. Revision F changed the maximum axial deflection to .500 at 2000 pounds. What had it been? 7. Instead of revision D, E, and F being three letters, what other method of marking could have been implemented for these three changes? Review questions based on previous units: 8. What is the thread form specified for the internal threaded holes? 9. What method was used to show external threads on this part? 10. Is this a drawing of multiple parts assembled? 11. Does this drawing feature any cutting-plane lines? 12. What is the radius of the undercut indicated by a local note? 13. What is the maximum material condition diameter of the largest cylindrical feature of this part? 14. This drawing has an italic "f" symbol on some surfaces in the left side view. What are these symbols? What does the 125 near the check mark at revision A on the tapered surface mean? 15 Inc.
Unit 14 Drawing Revision Systems
299
100
114
Print supplied by Clark Equipment Company
PR 14-1. ASM Silent Block Axle Mounting
4.68
4.62
2.510
2.490
2.510
2.490
1.042
1.022
1.010
066
2.312
2.252
0
±.020
"D"
"B"
-12 TAPER PER FOOT
GRIND OR MACHINE OPT.(A
13
64 DRILL X 45' CHAMFER
BOTH ENDS
BE 90 t.010 WITH MOUNTING
BOSSES
MIN. FLAT
.75 BOTH ENDS
.28
RWT
HOLE MUST
125
2.68+.09
000
5.50
(2.18) (1.62) (1.41) .005
1.020
1.262
1.259
4.26
4.24
1722071
-.09 X 45 CHAMA
2.12
-ø.50 DRILL
V.50 FOR ASM
OPT. CONST.
1-12 UNF-2A, PD MAX. 1.0691
.92 t.020 THD LENGTH (A
MIN. 1.0631
"C"
"A"
MUST BE FREE OF TOOL MARKS
SAE 4140 LEAD ED C.R.
OR STRESSPROOF
-SAE-R630 BHK,Z D
OR SAE-R630 BHZ A
Z-DENOTESA HIGH MODULUS STOCK
E WITH WEATHER RESISTANCE AND
RESISTANCE TO A HYSTERESIS BUILD UP
.62
MALLEABLE IRON SAE 32510
A DUCTILE 60-45-10 OPT.
+.88
1.75-
-18 UNF-3B, PD MAX. .5934
V.03 X 30 2 HOLES
NOTE
SURFACES "A" & "B" AND "C" & "D" MUST
BE PARALLEL AND IN SAME PLANE
DEFLECTION SPEC.:
MAX. RADIAL DEFLECTION .050 AT 4000 POUNDS
MAX. AXIAL DEFLECTION 500 AT 2000 POUNDS
BREAK ALL SHARP CORNERS
SIMILAR TO 329676
MICRO UNLESS OTHERWISE SPECIFIED MAX. INDUSTRIAL TRUCK DIVISION
OR .010
CHANGES
CHG.
VENDORS
DAYTON RUBBER CO
BUSHINGS INC. NO. 3221 C
DATE
BY
TOL. ON FIN. DIMS
ALL OTHER DIMENSIONS OR
DO NOT SCALE
SCALE
MATERIAL
FILM
ON
CLARK EQUIPMENT CO.
BATTLE CREEK,
MICHIGAN
NOTED
ASM SILENT BLOCK
20 JAN HT. TREATMENT
WAS .250
Z NOTE ADDED
D WAS SAE-R-630-BHKZ 23 DEC JCS
CNO. ADDED
WAS 1 MIN. THD
A ADDED
16 JAN JCS
AXLE MOUNTING
HARDNESS
DRAWN FOR
13 JAN JCS
ea
68-557
67-971
67-651
22 MAY DRAWN BY
16 OCT CHECKED BY
26 JUL RELEASED BY
20 THRU 50
M. BRESSON
DATE
DATE 12 APR
DATE
DATE
16 MAY MB
1722071
11 OCT MB
MB
RN67-393
Transcribed Image Text:Unit 14 Drawing Revision Systems 299 100 114 Print supplied by Clark Equipment Company PR 14-1. ASM Silent Block Axle Mounting 4.68 4.62 2.510 2.490 2.510 2.490 1.042 1.022 1.010 066 2.312 2.252 0 ±.020 "D" "B" -12 TAPER PER FOOT GRIND OR MACHINE OPT.(A 13 64 DRILL X 45' CHAMFER BOTH ENDS BE 90 t.010 WITH MOUNTING BOSSES MIN. FLAT .75 BOTH ENDS .28 RWT HOLE MUST 125 2.68+.09 000 5.50 (2.18) (1.62) (1.41) .005 1.020 1.262 1.259 4.26 4.24 1722071 -.09 X 45 CHAMA 2.12 -ø.50 DRILL V.50 FOR ASM OPT. CONST. 1-12 UNF-2A, PD MAX. 1.0691 .92 t.020 THD LENGTH (A MIN. 1.0631 "C" "A" MUST BE FREE OF TOOL MARKS SAE 4140 LEAD ED C.R. OR STRESSPROOF -SAE-R630 BHK,Z D OR SAE-R630 BHZ A Z-DENOTESA HIGH MODULUS STOCK E WITH WEATHER RESISTANCE AND RESISTANCE TO A HYSTERESIS BUILD UP .62 MALLEABLE IRON SAE 32510 A DUCTILE 60-45-10 OPT. +.88 1.75- -18 UNF-3B, PD MAX. .5934 V.03 X 30 2 HOLES NOTE SURFACES "A" & "B" AND "C" & "D" MUST BE PARALLEL AND IN SAME PLANE DEFLECTION SPEC.: MAX. RADIAL DEFLECTION .050 AT 4000 POUNDS MAX. AXIAL DEFLECTION 500 AT 2000 POUNDS BREAK ALL SHARP CORNERS SIMILAR TO 329676 MICRO UNLESS OTHERWISE SPECIFIED MAX. INDUSTRIAL TRUCK DIVISION OR .010 CHANGES CHG. VENDORS DAYTON RUBBER CO BUSHINGS INC. NO. 3221 C DATE BY TOL. ON FIN. DIMS ALL OTHER DIMENSIONS OR DO NOT SCALE SCALE MATERIAL FILM ON CLARK EQUIPMENT CO. BATTLE CREEK, MICHIGAN NOTED ASM SILENT BLOCK 20 JAN HT. TREATMENT WAS .250 Z NOTE ADDED D WAS SAE-R-630-BHKZ 23 DEC JCS CNO. ADDED WAS 1 MIN. THD A ADDED 16 JAN JCS AXLE MOUNTING HARDNESS DRAWN FOR 13 JAN JCS ea 68-557 67-971 67-651 22 MAY DRAWN BY 16 OCT CHECKED BY 26 JUL RELEASED BY 20 THRU 50 M. BRESSON DATE DATE 12 APR DATE DATE 16 MAY MB 1722071 11 OCT MB MB RN67-393
Expert Solution
trending now

Trending now

This is a popular solution!

steps

Step by step

Solved in 3 steps with 3 images

Blurred answer
Knowledge Booster
Numerical Calculations
Learn more about
Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.
Similar questions
  • SEE MORE QUESTIONS
Recommended textbooks for you
Elements Of Electromagnetics
Elements Of Electromagnetics
Mechanical Engineering
ISBN:
9780190698614
Author:
Sadiku, Matthew N. O.
Publisher:
Oxford University Press
Mechanics of Materials (10th Edition)
Mechanics of Materials (10th Edition)
Mechanical Engineering
ISBN:
9780134319650
Author:
Russell C. Hibbeler
Publisher:
PEARSON
Thermodynamics: An Engineering Approach
Thermodynamics: An Engineering Approach
Mechanical Engineering
ISBN:
9781259822674
Author:
Yunus A. Cengel Dr., Michael A. Boles
Publisher:
McGraw-Hill Education
Control Systems Engineering
Control Systems Engineering
Mechanical Engineering
ISBN:
9781118170519
Author:
Norman S. Nise
Publisher:
WILEY
Mechanics of Materials (MindTap Course List)
Mechanics of Materials (MindTap Course List)
Mechanical Engineering
ISBN:
9781337093347
Author:
Barry J. Goodno, James M. Gere
Publisher:
Cengage Learning
Engineering Mechanics: Statics
Engineering Mechanics: Statics
Mechanical Engineering
ISBN:
9781118807330
Author:
James L. Meriam, L. G. Kraige, J. N. Bolton
Publisher:
WILEY