Determine the upward thrust F on the .5 semi-cylindrical top of the container shown below. The container is full of oil under a * .pressure of 2 x 105 Pa Oil 2. Y= 8.15 kN / m 3 5 m Greater than 2000 kN Less than 1000 kN O Greater than 1000 kN O R= 0.75 m 2 m

Determine the upward thrust F on the .5 semi-cylindrical top of the container shown below. The container is full of oil under a * .pressure of 2 x 105 Pa Oil 2. Y= 8.15 kN / m 3 5 m Greater than 2000 kN Less than 1000 kN O Greater than 1000 kN O R= 0.75 m 2 m

Name: Determine the upward thrust F on the .5semi-cylindrical top of the co
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: Determine the upward thrust F on the .5semi-cylindrical top of the container shownbelow. The container is full of oil under apressure of 2 × 105 PaOilY= 8.15 kN / m325 mGreater than 2000 kNLess than 1000 kNGreater than 1000 kNR= 0.75 m2 m

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter8: Centroids And Distributed Loads

Section: Chapter Questions

Problem 8.114P: Determine the resultant force acting on the elbow of the thin-walled pipe when the pipe carries a...

See similar textbooks

Similar questions

Determine the smallest distance I) that would prevent the concrete dam from tipping about corner A. Use w=62.4lb/ft3 for water and c=150lb/ft3 for concrete.
The high-pressure water cock is rigidly attached to the support at D. Neglecting the weights of the members, draw the FBD of the entire assembly and count the unknowns.
One side of the container has a 03-m square door that is hinged at its top edge. If the container is filled with water, determine the smallest force F that must be applied to the bottom edge of the door to keep it closed.
The cylindrical water tank with R = 10 ft and H = 1.6 ft has thin steel walls of uniform thickness and weighs 18000 lb when empty. Determine the depth of the water h for which the center of gravity G of the tank plus water will be located at the surface of the water. For water, use =62.4lb/ft3.
Determine the force F required to pull up the 3.54m stopper from the drain of a sink if the depth of water is 10 in. Use =0.036lb/in.3 for water and neglect the weight of the chain.
Repeat Prob. 4.152 assuming that the 400-kN force is applied at O instead of L.
The weight of the cylindrical tank is negligible in comparison to the weight of water it contains (water weighs 62.4lb/ft3). The coefficient of static friction between the tank and the horizontal surface is s. (a) Assuming a full tank, find the smallest force P required to tip the tank, and the smallest s that would allow tipping to take place. (b) If the force P = 200 lb initiates tipping, determine the depth of water in the tank.
Determine the resultant force acting on the elbow of the thin-walled pipe when the pipe carries a uniform internal pressure p0.
Compute the surface area of the axi-symmetric domed structure.
The 3 × 4-m side of an open tank is hinged at its bottom A and is held in place by a thin rod BC. The tank is to be filled with glycerine with a density of 1263 kg/m3 . Determine the force T in the rod and the reaction at the hinge after the tank is filled to a depth of 2.9 m.
The 280-kg, 6-m-wide rectangular gate is hinged at B and leans against the floor at A making an angle of 45° with the horizontal. The gate is to be opened from its lower edge by applying a normal force at its center. Determine the minimum force F required to open the water gate.
Q6: A hydraulic lift is to be used to lift a 2500 kg weight by putting a weight of 25 kg on a piston with a diameter of 10 cm. Determine the diameter of the piston on which the weight is to be placed.