Example 15.12. A steam turbine is fed with steam having an enthalpy of 3100 kJ/kg. It moves out of the turbine with an enthalpy of 2100 kJ/kg. Feed heating is done at a pressure of 3.2 bar with steam enthalpy of 2500 kJ/kg. The condensate from a condenser with an enthalpy of 125 kJ/kg enters into the feed heater. The quantity of bled steam is 11200 kg/h. Find the power developed by the turbine. As.um. that the water leaving the feed heater is saturated liquid at 3.2 bar and the heater is direct mixing type. Neglect pump work.

Example 15.12. A steam turbine is fed with steam having an enthalpy of 3100 kJ/kg. It moves out of the turbine with an enthalpy of 2100 kJ/kg. Feed heating is done at a pressure of 3.2 bar with steam enthalpy of 2500 kJ/kg. The condensate from a condenser with an enthalpy of 125 kJ/kg enters into the feed heater. The quantity of bled steam is 11200 kg/h. Find the power developed by the turbine. As.um. that the water leaving the feed heater is saturated liquid at 3.2 bar and the heater is direct mixing type. Neglect pump work.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Superheated steam at 20 MPa, 560 deg C enters the turbine of a vapor power plant. The pressure at the exit of the turbine is 0.5 bar, and liquid leaves the condenser at 0.4 bar at 75 deg C. The pressure is increased to 20.1 MPa across the pump. The turbine and pump have isentropic efficiencies of 81% and 85%, respectively. Cooling water enters the condenser at 20 deg C with a mass flow rate of 70.7 kg/s and exits the condenser at 38 deg C. For the cycle, determine (a) the mass flow rate of steam, in kg/s. (b) the thermal efficiency.
A closed-cycle gas turbine plant consists of a compressor, a heat exchanger, a heater, a two-stage turbine with reheater, and a cooler. The maximum and minimum pressures and temperature in the cycle are 30 bar and 570oC, and 7.5 bar and 15oC. The pressure in the reheater is 15 bar. Sketch the layout of the plant and indicate pressures and temperaturesbetween the components if (a) the heat exchanger is used, (b) the heat exchanger by-passed.Calculate the ideal cycle efficiencies and work ratios in both cases. The gas used in the circuit is helium, which has a molar mass of 4 kg/kmol and cp=1.5 R
(a) Steam is supplied, dry saturated at 40 bar to a turbine and the condenser pressure is 0.035 bar. If the plant operates on the Rankine cycle, calculate, per kilogram of steam: (i) the work output neglecting the feed-pump work; (ii) the work required for the feed pump: (iii) the heat transferred to the condenser cooling water, and the amount of cooling water required through the condenser if the temperature rise of the water is assumed to be 5.5 K; (iv) the heat supplied; (v) the Rankine efficiency; (vi) the specific steam consumption. (b) For the same steam conditions calculate the efficiency and the specific steam consumption for a Carnot cycle operating with wet steam. (C) Repeat Problem (a) for a steam supply condition of 40 bar and 350 °C and the same condenser pressure of 0.035 bar.
The catalogue for a refrigerant 22, four-cylinder, hermetic compressor operating at 29 r/s. a condensing temperature of 40 °C and an evaporating temperature of -4 °C shows a refrigeration capacity of 96.4 kW. At this operating points the motor (whose efficiency is 90 percent) draws 28.9 kW. The bore of the cylinders is 87 mm and the piston stroke is 70 mm. The performance data are based on 8 °C of subcooling of the liquid leaving the condenser. Compute 3.1 the actual volumetric efficiency and 3.2 the compression efficiency.
provide solutions using the ASHRAE tables and charts A standard ammonia vapor-compression cycle developing 20 tons of refrigeration operates with a condensing temperature of 32°C and an evaporating temperature of -14°C. Calculate the ..
Steam enters the turbine of a steam power plant, operating on Rankine cycle, at 10 bar,300 C. The condenser pressure is 0.1 bar. Steam leaving the turbine is 90% dry. Calculate the adiabatic efficiency of the turbine and also the cycle η, neglecting pump work.
The evaporator and condenser temperatures are -20°C and 35°C, respectively, in an ammonia simple saturation cycle. The method will be used to produce 12,500kg of ice at -15°C in 32 hours from water at 25°C. Assuming that 25 percent of the heat absorbed from the water is lost. Ice has a specific heat of 2.094Kj/kg-K, while fusion has a heat of 335kj/kg. Determine the: a) Total Heat b) Mass flow rate
A rankine cycle with three stages of reheating is executed with steam expanding initially from 18.111 Mpa and 540oC. The pressure of three reheaters are 4.0111 Mpa, 2.5111 Mpa and 0.98111 Mpa, and the steam leaves the first reheater at 500oC, the second 480oC. Condensation occurs at 0.4111 Mpa. Calculate W,ec, and ee.
Describe the Internally and Externally Reversible Processes
Superheated steam (s. fig. C) at a pressure of 300 bar and a temperature of 550 ℃ enters a turbine made up of two stages. Steam exits the first stage of the turbine at 35 bar and gets reheated at a constant pressure at 550 ℃. Each stage of the turbine has an isentropic efficiency of 80%. The isentropic efficiency of the pump is 85%. The pressure of the condenser is 10 kPa. (a) Sketch the cycle in a T-s diagram and calculate the enthalpy at each point of the cycle. (b) Calculate the flow rate of the working fluid if the power output of the turbine is 100 MW. (c) Calculate the thermal efficiency of the cycle. (d) Double check the result for the heat rejected in the condenser.
Steam at 4800 lbf/in.2, 1000 deg F enters the first stage of a supercritical reheat cycle including two turbine stages. The steam exiting the first-stage turbine at 600 lbf/in.2 is reheated at constant pressure to 1000 deg F. Each turbine stage and the pump have an isentropic efficiency of 85%. The condenser pressure is 1 lbf/in.2 If the net power output of the cycle is 100 MW, determine (a) the rate of heat transfer to the working fluid passing through the steam generator, in MW. (b) the rate of heat transfer from the working fluid passing through the condenser, in MW. (c) the cycle thermal efficiency.
Please help!!!! Refrigerant 22 enters the compressor of an ideal vapor-compression refrigeration system as saturated vapor at -30°C with a volumetric flow rate of 10 m3/min. The refrigerant leaves the condenser at 19°C, 9 bar. Determine: (a) the magnitude of the compressor power, in kW. (b) the refrigerating capacity, in tons. (c) the coefficient of performance. (d) the rate of entropy production for the cycle, in kW/K. Answer for part (a): 52 kW Answer for part (b): 59 tons Answer for part (c): 3.98 Please answer part also d! That's the part I also need. Thank you!