Find its maximum velocityA new design of Saturn 19 rocket with mass 1.54 x106 kg has a propulsion engine that can eject gases at a constant speed of 393.55 m/s (vGas) by burning fuel at a rate of 4.5 x10 5 kg/s (dmdT). In full tank, the rocket can carry a fuel of mass 44.42 x10 6 kg.If this design exceeds the velocity of 11,200 m/s it can can successfully escape Earth's gravity. Determine if this is so. Find its maximum velocity (velyZ). (Pitch Angle = 0) (COLLAB) A new design of Saturn 19 rocket with mass 1.54 x106 kg has a propulsion engine that caneject gases at a constant speed of 393.55 m/s (vGas) by burning fuel at a rate of 4.5 x10 5 kg/s (dmdT). Infull tank, the rocket can carry a fuel of mass 44.42 x10 6 kg.If this design exceeds the velocity of 11,200 m/s it can can successfully escape Earth's gravity.Determine if this is so. Find its maximum velocity (velyZ). (Pitch Angle = 0)

Answered: Image /qna-images/answer/62e5f56f-f1a4-47bb-bb6f-2b5e7875ff11.jpg

Find its maximum velocity A new design of Saturn 19 rocket with mass 1.54 x106 kg has a propulsion engine that can eject gases at a constant speed of 393.55 m/s (vGas) by burning fuel at a rate of 4.5 x10 5 kg/s (dmdT). In full tank, the rocket can carry a fuel of mass 44.42 x10 6 kg. If this design exceeds the velocity of 11,200 m/s it can can successfully escape Earth's gravity. Determine if this is so. Find its maximum velocity (velyZ). (Pitch Angle = 0)

Find its maximum velocity A new design of Saturn 19 rocket with mass 1.54 x106 kg has a propulsion engine that can eject gases at a constant speed of 393.55 m/s (vGas) by burning fuel at a rate of 4.5 x10 5 kg/s (dmdT). In full tank, the rocket can carry a fuel of mass 44.42 x10 6 kg. If this design exceeds the velocity of 11,200 m/s it can can successfully escape Earth's gravity. Determine if this is so. Find its maximum velocity (velyZ). (Pitch Angle = 0)

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter5: Analysis Of Convection Heat Transfer

Section: Chapter Questions

Problem 5.32P

See similar textbooks

Similar questions

A model rocket has engine with an average thrust of 2.82 N. The rocket mass is 71.5 g, which includes fuel mass 27.3 g. The duration of fuel burning is 2.52 s. What is the final speed vf of this rocket if it were to be fired from International Space Station with initial speed vi=7660 m/s? Assume the fuel burns at a constant rate.
As a young engineer, you have been tasked to select the location of a wind turbine based on the details of the location and relevant specification below:Air densityAverage air velocityDiameter of wind turbine bladesLOCATION A1.29 kg/m3 54 km/h 70 mLOCATION B1.21 kg/m3 63 km/h 60 m By comparing the amount of power generated (in MW) at Location A and Location B, determine the location that will give the optimum wind power generation.9 kg of Refrigerant 134-a is initially at 26.69°C with enthalpy of 100 kJ/kg. Heat is transferred to the refrigerant under a constant-pressure process until the entropy of the refrigerant reaches 0.9795 kJ/kg.K.(i) Determine the final temperature of the refrigerant(ii) Calculate the boundary work, Wb, in kJ.Assist your answer with a proper P-v diagram indicating the properties,process, and boundary work region clearly.(iii) Explain the reason behind the high amount of boundary work obtained in (ii).Assist your explanation with relevant sketching.
Liquid hydrogen and oxygen are burned in a combustionchamber and fed through a rocket nozzle that exhausts atVexit = 1600 m/s to an ambient pressure of 54 kPa. Thenozzle exit diameter is 45 cm, and the jet exit density is0.15 kg/m3. If the exhaust gas has a molecular weight of 18,estimate (a) the exit gas temperature, (b) the mass flow, and(c) the thrust developed by the rocket.
Design a rocket nozzle, knowing that you have a chamber pressure of 6.28 MPa, mass flow rate of 1.23, and temperature of 825K.
Steam enters a horizontal turbine at 350 lbf/in 2 absolute,580 ° C, and 12 ft/s and is discharged at 110 ft/s and 25 ° Csaturated conditions. The mass fl ow is 2.5 lbm/s, and theheat losses are 7 Btu/lb of steam. If head losses are negligible,how much horsepower does the turbine develop?
The converging-diverging nozzle of the engine of a new supersonic unmanned aerial vehicle (UAV) has an exit area of 50 cm^2 . At the design operating condition, the mass flow rate of exhaust gases (? ≈ 1.4, molecular weight = 26 g/mol) is 1.75 kg/s. The exhaust gases enter the nozzle with stagnation pressure and temperature equal to Po = 300 kPa and To = 500 K, respectively a) What is the optimal cruising altitude for the operation of the nozzle of this UAV? (b) What is the lowest altitude at which the plane can fly such that the flow inside the diverging part of the nozzle is kept supersonic? Note: - Assume that the stagnation conditions of the flow of exhaust gases entering the nozzle are kept constant with varying altitude
a) A fluid with mass of (2,5+JM1)%m for volume of (3)cm’” . Calculate the mass density in (Kg/m’), (slug/ft’) and weight density in (Ib/ft’) and relative density of the fluid. b)Estimate the exit velocity of water from the shower head. The shower head contains 80 holes of (0.1)cm diameter. 3) d=15cm / (2) -— -~ () V2=0.25m/s +Juldlix5 Vi=1m/s +Juliix5
You are being tasked as a wind tunnel engineer to investigate the performance of newly designed high-speed wind tunnel in UPNM. An exhaust gas flows through a nozzle where the inlet area is 5,000 cm2.At this inlet, the gas has a velocity of 1,200 m/s, temperature of 1,500oC,and pressure of 6,000 kPa. Initial measurement revealed that the pressure at the exit of the wind tunnel is 100 kPa. Based on this information, analyze and investigate ; i. Mach number at inlet of the nozzle ii. The velocity of gas at exit iii. The area of the nozzle at exit Take specific heat ratio for the exhaust gas, ? to be 1.7 and the gas constant, R to be 205 J/kg.
A hose of diameter 3 cm is used to drain a very large tank filled with water (=1000 kg/m3). The hose is draped over the side of the tank so the water is siphoned out. If the hose discharge is 1 m below the surface of the water, estimate the discharged mass flow rate in kg/s? A siphon implies a continuous liquid leg from the water in the tank up the siphon at point 2, the highest elevation, and down to the discharge at point 3. Assume that alpha=1, the discharge at point 3 as well as the tank are both open to the atmosphere and shaft work and frictional losses are ignored. 2.Based on your solution, how can you drain the tank faster?
The power in kilowatts available in a water jet of cross-sectional area 0.004 m2 andvelocity 20 m/sec is: (a) 0.495; (b) 16.0; (c) 17.2; (d) 32; (e) none of these answers.
A cylindrical tank with a large diameter is filled with water to a depth D = 0.402 m. A hole of cross-sectional area A = 5.26 cm2 in the bottom of the tank allows water to drain out. (a) What is the rate at which water flows out, in cubic meters per second? (b) At what distance below the bottom of the tank is the cross-sectional area of the stream equal to one-half the area of the hole?
Consider two identical wind turbines with a hub height of 40 m, one located in flat agricultural land and one located above a forest. What is the relative output power for the two turbines if the wind velocity is 10 m/s at a height of 100 m in both cases? Pagricultural/Pforest = ?