Furniture Face Lift refinishes old wood furniture. Their process for refinishing chairs has 9 workers and 4 stations. Each chair starts at the Stripping station, then goes to Priming, then to Painting and finally to Inspection. Where there are multiple workers within a station, each worker works independently on his/her own chair. Assume inventory buffers are allowed between each station. Station Staffing Processing time (hours per chair per worker) Stripping 3 2.5 Priming 2 1.5 Painting 3 1.75 Inspection 1 0.8 A truck loaded with 10 chairs arrives. How many hours will it take them to complete these 10 chairs?(The accuracy should be of two digits after the decimal places.)

Furniture Face Lift refinishes old wood furniture. Their process for refinishing chairs has 9 workers and 4 stations. Each chair starts at the Stripping station, then goes to Priming, then to Painting and finally to Inspection. Where there are multiple workers within a station, each worker works independently on his/her own chair. Assume inventory buffers are allowed between each station. Station Staffing Processing time (hours per chair per worker) Stripping 3 2.5 Priming 2 1.5 Painting 3 1.75 Inspection 1 0.8 A truck loaded with 10 chairs arrives. How many hours will it take them to complete these 10 chairs?(The accuracy should be of two digits after the decimal places.)

Practical Management Science

6th Edition

ISBN:9781337406659

Author:WINSTON, Wayne L.

Publisher:WINSTON, Wayne L.

Chapter12: Queueing Models

Section: Chapter Questions

Problem 59P

See similar textbooks

Similar questions

A Printed Circuit Board (PCB) machine installs integrated circuits onto a board. Before starting to produce a board, the PCB machine requires a 20-minute setup. Once in production, the PCB machine requires only 0.15 minute per board. Assume there is ample demand. Say the PCB machine produces 200 boards between setups and demand is 2 boards per minute. Given this operating process, what is the average inventory of boards at the PCB machine? answer:________
â€¢ 1An advantage of a make-to-stock process is which of the following? o It responds directly to customer orderso It allows the firm to avoid inventory costso Rapid delivery of a standard producto All units of output are uniqueCorrectâ€¢ 2According to Littleâ€™s law, which of the following can be used to estimate inventory?o Set up time times throughput rateo Process time times cycle timeo Process velocity times flow timeo Throughput rate times flow timeCorrectâ€¢ 3Which of the following is a principle of reengineering? o Integrate the outcomes of parallel activitieso Organize around the taskso Treat geographically dispersed resources as though they were centralizedo Capture information many times, at the source and where it is interpretedCorrectâ€¢ 4Which of the following is one of the major types of stakeholders impacted by most consulting projects?o International government regulatorso Other consultantso…
You operate a process with three workstations; the cycle times are given below. A regular batch is 52 units and your production line runs 5 hours per day. Calculate how many hours lead time is required to ship a batch, assuming there are no orders ahead in the queue and there is no inventory to fill the order. Workstation 1 has a cycle time of 2 minutes per unit Workstation 2 has a cycle time of 3 minutes per unit Workstation 3 has a cycle time of 3 minutes per unit Select one: a. 1560.00 b. 8.00 c. 1560.00 d. 90.00 e. 2340.00
The White Tooth Device Company is a manufacturer of high-end electric toothbrushes. For each toothbrush, there is a sequence of assembly steps performed by five workers. Each worker does two tasks. Inventory buffers are allowed between workers. (a) What is the capacity and cycle time of this process? (b) What is the idle time of each worker if the process operates at full capacity? (c) Suppose two workers could be hired, F and G, and they take the same time to complete tasks as the current five workers. F and G can be assigned to work on the same pair of tasks as one of the current workers. For example, F could be assigned tasks T1 and T2 (just like worker A) while G is assigned T5 and T6 (just like worker C). They cannot be assigned tasks that are currently assigned to two workers. For example, F cannot be assigned to tasks T2 and T3 (because they are currently being done by workers A and B). What is the capacity of this process with workers F and G included?
Kevins Shampoo company makes four kinds of shampoo: rose, lemon, ginger, and tea tree. The demand for the four scents are 191, 164, 92 and 74 kg per hour respectively. The production process can produce any shampoo at the rate of 581 kg per hour, but 2 hours are needed to switch between scents. The process doesn’t produce any shampoo during switchover times. Kevin wants to choose a production schedule that (i) cycles repeatedly through the four scents, (ii) meets the required demand and (iii) minimizes the amount of inventory held. (please round your answers to 2 decimal places) 1.How many kg of rose shampoo should Kevin produce before switching over to another scent？ 2.Kevin needs to buy coconut oil to make her shampoo. She needs 1401 kg of coconut oil per day on average. The supplier charges a EUR 77 delivery fee per order (which is independent of the order size) and EUR 5.13 per kg. Kevin annual holding cost is 30%. Assume 52 weeks per year and 5 days per week. If Kevin wants to…
A company is in the business of machining parts that go through various work centers. Suppose work center A feeds work center B with parts. The following times (in minutes) are given for each work center. Work Center Setup time Run time (per part) Move time A 3 0.5 6 B 2 0.1 8 A standard kanban container holds 50 parts that are transferred from work center A to work center B. The demand rate at work center B is four parts per minute. How many kanban containers are needed for this situation? 2. If move time is cut in half, what does this do to the number of containers needed? How much will this change reduce inventory?
XOX Corporation's management keeps track of the time it takes to process orders. During the most recent month, the following average times were recorded per order Wait time 15. 6 Inspection time 0.8 Process time 1.6 Move time 0.7 Queue time 3. 9 1. Percentage of manufacturing cycle time spent on non-value-added activities 2. Compute the delivery cycle time in days
CYCLE COUNTING AT COLE’S TRUCKS, INC. Cole’s Trucks, Inc., a builder of high-quality refuse trucks, has about 5,000 items in its inventory. Itwants to determine how many items to cycle count each day. APPROACH c After hiring Matt Clark, a bright young OM student, for the summer, the firm deter-mined that it has 500 A items, 1,750 B items, and 2,750 C items. Company policy is to count all A items every month (every 20 working days), all B items every quarter (every 60 working days), and all C itemsevery 6 months (every 120 working days). The firm then allocates some items to be counted each day.
In a large microelectronics plant, the assembly cell for circuitboards has a demand for 200 units an hour. Two feeder cellssupply parts A and B to the assembly cell (one A and one Bfor each board). Standard containers that look like dividedtrays are used. A container will hold 20 As or 10 Bs. It takes10 minutes to fill up a container with As and 20 minutes tofill up a container with Bs. Transit time to the assembly cell is5 minutes for both A and B. No safety factor is used. Set up akanban control system for the assembly process.
. Sarah’s Organic Soap Company makes four kinds of organic liquid soap: “regular,”“lavender,” “citrus,” and “tea tree.” Demands for the four scents are 150, 120, 75, and50 kgs per hour, respectively. Sarah’s production process can produce any soap at therate of 450 kgs per hour, but 1.5 hours are needed to switch between scents. Duringthose switchover times, the process doesn’t produce any soap. Sarah wants to choosea production schedule that (i) cycles repeatedly through the four scents, (ii) meets therequired demand, and (iii) minimizes the amount of inventory held.How many kgs of “regular” should Sarah produce before switching over to another scent?
XOX Corporation's management keeps track of the time it takes to process orders. During the most recent month, the following average times were recorded per order Wait time 15.6 Inspection time 0.8 Process time 1.6 Move time 0.7 Queue time 3.9 Compute the delivery cycle time in days. Percentage of manufacturing cycle time spent on non-value-added activities.
Tuff-Rider, Inc., manufactures touring bikes and mountainbikes in a variety of frame sizes, colors, and component com-binations. Identical bicycles are produced in lots of 100. Theprojected demand, lot size, and time standards are shown inthe following table: Item Touring MountainDemand forecast 5,000 units/year 10,000 units/yearLot size 100 units 100 unitsStandard processing time .25 hour/unit .50 hour/unitStandard setup time 2 hours/lot 3 hours/lot The shop currently works 8 hours a day, 5 days a week,50 weeks a year. It operates five workstations, each producingone bicycle in the time shown in the table. The shop main-tains a 15 percent capacity cushion. How many workstationswill be required next year to meet expected demand withoutusing overtime and without decreasing the firm’s currentcapacity cushion?