Answer the value of the deflection at point C. Enter your answer in mm to three decimal places. Assume the positive direction of deflection in the positive direction of v axis. A steel beam, of lengths a = 5 m and b=2 m and a hollow box cross section, is supported by a hinge support A and roller support B, see Figure Q.1. The widthand height of the cross section are 200 mm and 300 mm, respectively, and the wall thickness of the cross section is 5 mm. The beam is under a distributedload of the intensity that linearly varies from q = 0 kN/m to q = 5.1 kN/m for AB span; and is constant with q= 5.1 kN/m for BC span. The Young's modulus ofsteel is 200 GPa.▲y, vAwww.immДв сba5 mm200 mmFigure Q.1300 mmX g) the value of the deflection at point C. Enter your answer in mm to three decimal places. Assume the positive direction of deflection in the positive direction ofv axis.Answer:Check

Answered: Image /qna-images/answer/c2954a0b-750e-456c-9833-05c5fa4cdec3.jpg

Answered: g) the value of the deflection at point…

g) the value of the deflection at point C. Enter your answer in mm to three decimal places. Assume the positive direction of deflection in the positive direction of v axis. Answer:

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter5: Stresses In Beams (basic Topics)

Section: Chapter Questions

Problem 5.8.7P: A steel beam of length L = 16 in. and cross-sectional dimensions h = 0.6 in. and h = 2 in. (see...

See similar textbooks

Related questions

Q: Rigid bar ABC is supported by pin-connected bar (1). Bar (1) is 1.500 in. wide and 1.000 in. thick,…

A: Given:The width of the bar is the thickness of the bar is The elastic modulus is The length of a is…

Q: Derive the frequency (or characteristic) equation in the form tan ( ) = ( ) for the longitudinal…

A: To Find:The equation of the frequency in the form of Tan.Given:

Q: We are setting up a controlled experiment to find the coefficient of static friction between the…

Q: The pipe ABCDE is supported by ball-and-socket joints at A and D and by cable ECF that passes…

A: Pipe is supported by ball and socket joints at A and D.Since ball and socket joints only restrict…

Q: An electric motor has 4 rotor bars and runs at 2980rpm. A vibration analysis shows significant…

A: The presence of vibration frequency components at integer multiples of the fundamental rotational…

Q: A horizontal split case pump with a single impeller shows a predominant vibration reading at a…

A: A positive displacement pump may vibrate for the following reasons:Uneven angular alignment:-There…

Q: The velocity potential & = x³y does not correspond to an incompressible flow. Prove this by finding…

A: Given:The velocity potential is .Calculation:The deriving velocity for the x-component:The deriving…

Q: Find the response X1(t) , X2(t)

A: It is asked to find the response of the system

Q: What is the cause of surface tension? Multiple Choice O Attractive forces between the atoms O…

A: Surface tension: it is a physical property of liquids.It is defined as the force per unit length…

Q: Air at 60° C flows through the very wide duct. Suppose that L = 150 mm. v= 18.9(106) m²/s. (Figure…

Q: Based on pneumatic components given in Figure 1, construct one cascade circuit using two air-line…

A: The given sequence is A+B+B-A-.This can be divided into two groups. The rules for grouping are:A…

Q: A power plant operates on a regenerative vapor power cycle with one closed feedwater heater. Steam…

A: The steam condition at inlet of turbine is The condenser pressure is The pressure at point 2 is The…

Q: The reactive force developed by a jet engine to push an airplane forward is called thrust, and the…

A: Given,The reactive force developed by a jet engine to push an airplane forward is called thrust, and…

Q: The steel bar AB has a x-in.square cross section and is held by pins that are a fixed distance apart…

A: To find:The required distance d for which the bar will make contact with point C. Given data:The…

Q: 1. The I-beam is fabricated by welding the three steel plates together as shown. A force of is…

A: The given I section can be split into three basic shapes as shown below.

Q: A 14-kg rock Is thrown upward with a force of 280 N at a location where the local gravitational…

Q: A ski resort chair lift has towers spaced 44 m horizontaly appart. The upper tower is 15 m higher…

A: The mass of each chair is the horizontal space is the upper tower height is The chair is…

Q: A chain having a length L and weight W rests on a street for which the coefficient of static…

Q: B Consider the system given in the figure. The spring may sustain compressive as well as tensile…

A: Given:To find:Derive the equation of motion.

Q: Pump A small power plant produces steam at 3 MPa, 600°C, from the boiler. The first turbine section…

A: The inlet condition at turbine is The inlet pressure of second turbine is The condenser temperature…

Q: 4.19-4.24 For the beams shown in Figures P4-19-P4-24, determine the nodal displacements and slopes,…

Q: For W = 160 lb and μ = 0.3, the horizontal force F needed to move the lower block is best given by W…

A: According to the given dataW=160 lb2W=2x160=320 lbWe need to find the Force F

Q: A four-cylinder vertical engine has cranks 150mm long. The plane of rotation of the first, second…

A: The radius of the crank, r=150 mmMasses of cranks,For complete balancing, all the forces and all the…

Q: Q1: An engineer claimed that his device produces two streams of 1 am air (outlet 1) and 1.5 atm…

A: To Find : The device is feasable or notGiven : The outlet temperature of two stream is The aoutlet…

Q: A substance exists in two solid modifications alpha and beta and also as liquid and vapour at a…

A: The phase diagram for the given substance at 1 atm pressure is shown below.In the above…

Q: Determine the moment of inertia of the cross-sectional area of the beam about: A. the x-axis B. the…

A: Given:The length of a is the length of b is The length of c is the length of d is

Q: 7. Consider the statement “An extraterrestrial astronomer surveying our solarsystem with the Doppler…

A: The objective of the question is to evaluate the validity of the statement that an extraterrestrial…

Q: (Figure 1) Figure k = 200 N/m 0.3 m Part A At the instant the spring becomes undeformed, the center…

Q: 7) Use strain energy to calculate the strain energy of the beam in the figure in terms of the…

Q: *Test your understanding start with E = -ħw to find TDSE

Q: A vapor compression refrigeration cycle operates at steady flow conditions with 0.25 kg/s or R-134a.…

Q: A beam is loaded and supported as shown. (a) Use the double-integration method to determine the…

A: Given : The free body diagram is,

Q: N1 N3 b roller a N4 fixed N2 FH 30⁰

A: Consider a 2D element-e connecting node-i and node-j.Since the element is 2D in nature, it has two…

Q: Shown is a brake mechanism used to hold the wheel from rotating when subjected to a moment M. The…

A: draw FBD

Q: 6-89. Determine the horizontal and vertical components of force at each pin. The suspended cylinder…

A: Determine the horizontal and vertical components of force at each pin.The suspended cylinder has a…

Q: The rod AB is held in equilibrium by a vertical wall, the horizontal floor and by a cable CB.…

Q: A steel beam, of lengths a=5 m and b=5 m and a hollow box cross section, is supported by a hinge…

A: To find:The maximum normal stress in the cross-section of the beam (in MPa).Given data:A steel beam…

Q: ...Does point P experience Coriolis acceleration? Why? BD rotates at constant WBD of 6 rad/s CCW. At…

A: Coriolis acceleration is a tangential acceleration of a slider sliding on another rotating link.…

Q: Please find the highest thermal efficiency possible, while remaining within the boundaries. What…

Q: An instrument package is held underwater by a cable attached to the floor of the ocean. The…

Q: Neglect the concentrated moment M and the concentrated load P and determine the deflection at B due…

Q: Compute the following for the given composite area. a) Locate the centroid with respect to the given…

A: Compute the following for the given composite area.a) Locate the centroid with respect to the given…

Q: The cantilever beam consists of a rectangular structural steel tube shape [E = 200 GPa; 1 = 350 ×…

Q: 6.14 Determine the nodal displacements and the element stresses, including prin- cipal stresses, due…

A: E=105GPat=5mm

Q: (Three-Dimensional Motion) A homogeneous 20-cm-diameter disk has a mass of 1 kg and is placed on a…

Q: Consider a regenerative Brayton cycle operating with a pressure ratio of 8, where the air enters the…

A: The pressure ratio is The inlet temperature at compressor is The inlet pressure at compressor is The…

Q: How is the mohrs circle plotted? what values were plotted

Q: The 10-1b box is projected up a smooth vertical circular Track as shown. When the box reaches 045",…

A: Given:To find:A) Sketch a Free body diagram and a kinetic diagram of the box at this instant.B)…

Q: A bar of steel has the minimum properties Se= 40 kpsi, Sy = 60 kpsi, and Sut = 80 kpsi. The bar is…

A: Given:The endurance stress is The yield stress is The ultimate stress is The steady torsion stress…

Q: For one-dimension heat transfer conduction consider a shielding wall for a nuclear reactor. The wall…

Concept explainers

Combined Loading

Any functioning component, such as machine parts, structural members, pressure vessels, and so on, are all under the influence of more than one force. When anybody is under the influence of more than one force such as shear forces, bending moments, axial forces, torsion, and so on, then such body is said to be under combined loading. A very practical example of combined loading is the crankshaft of an internal combustion engine (IC engine). The crankshaft of the IC engine is under high rpm, which is caused due to the torsional forces. Due to the presence of piston, counterbalances, and internal imbalances, the crankshaft experiences lateral forces and due to the rise in temperature, the crankshaft undergoes thermal expansion, which pulls the crankshaft along the axial direction and lateral direction. The presence of unbalanced loads along the periphery of the crankshaft also induces a bending moment.

Question

Answer the value of the deflection at point C. Enter your answer in mm to three decimal places. Assume the positive direction of deflection in the positive direction of v axis.

A steel beam, of lengths a = 5 m and b=2 m and a hollow box cross section, is supported by a hinge support A and roller support B, see Figure Q.1. The width
and height of the cross section are 200 mm and 300 mm, respectively, and the wall thickness of the cross section is 5 mm. The beam is under a distributed
load of the intensity that linearly varies from q = 0 kN/m to q = 5.1 kN/m for AB span; and is constant with q= 5.1 kN/m for BC span. The Young's modulus of
steel is 200 GPa.
▲y, v
A
www.imm
Дв с
b
a
5 mm
200 mm
Figure Q.1
300 mm
X

g) the value of the deflection at point C. Enter your answer in mm to three decimal places. Assume the positive direction of deflection in the positive direction of
v axis.
Answer:
Check

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1: Draw the free-body diagram of the beam.

VIEW

Step 2: Apply force and moment equilibrium.

VIEW

Solution

VIEW

Step by step

Solved in 3 steps with 5 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

A simple beam of span length 3.2 m carries a uniform load of intensity 48 kN/m, The cross section of the beam is a hollow box with wood flanges and steel side plates, as shown in the figure. The wood flanges are 75 mm x 100 mm in cross section, and the steel plates are 300 mm deep. What is the required thickness t of the steel plates if the allowable stresses are 120 M Pa for the steel and 6,5 M Pa for the wood? (Assume that the moduli of elasticity for the steel and wood are 210 GPa and 10 GPa, respectively, and disregard the weight of the beam.)
A simple beam that is 18 ft long supports a uniform load of intensity q. The beam is constructed of two C8 x 11.5 sections (channel sections or C-shapes) on either side of a 4 × 8 (actual dimensions) wood beam (see the cross section shown in the figure part a). The modulus of elasticity of the steel (E; = 30,000 ksi) is 20 times that of the wood (Ew). (a) If the allowable stresses in the steel and wood are 12,000 psi and 900 psi, respectively, what is the allowable load qmax Note: Disregard the weight of the beam, and see Table F-3(a) of Appendix F for the dimensions and properties of the C-shape beam. (b) If the beam is rotated 90° to bend about its v axis (see figure part b) and uniform load q = 250 lb/ft is applied, find the maximum stresses trs and crw in the steel and wood, respectively Include the weight of the beam. (Assume weight densities of 35 lb/ft3 and 490 lb/ft3 for the wood and steel, respectively.)
A weight W = 4500 lb falls from a height h onto a vertical wood pole having length L = 15 ft, diameter d = 12 in., and modulus of elasticity E = 1.6 × 106 psi (see figure). If the allowable stress in the wood under an impact load is 2500 psi. what is the maximum permissible height h?
The cantilever beam AB shown in the figure is an S6 × 12.5 steel I-beam with E = 30 × 106 psi. The simple beam DE is a wood beam 4 in. x 12 in. (nominal dimensions) in cross section with E = 1.5 x 106 psi. A steel rod AC of diameter 0.25 in., length 10 ft, and E = 30 x 106 psi serves as a hanger joining the two beams. The hanger fits snugly between the beams before the uniform load is applied to beam DE. Determine the tensile force Fin the hanger and the maximum bending moments MABand MDEin the two beams due to the uniform load, which has an intensity q = 400 lb/ft. Hint: To aid in obtaining the maximum bending moment in beam DE, draw the shear-force and bending-moment diagrams.
Two pipe columns (AB, FC) are pin-connected to a rigid beam (BCD), as shown in the figure. Each pipe column has a modulus of E, but heights (L1or L2) and outer diameters (d1or different for each column. Assume the inner diameter of each column is 3/4 of outer diameter. Uniformly distributed downward load q = 2PIL is applied over a distance of 3L/4 along BC, and concentrated load PIA is applied downward at D. (a) Derive a formula for the displacement
A W 310 x 52 steel beam is subjected to a point load P = 45 kN and a transverse load V = 20 kN at B. The beam has length L =2m.(a) Calculate the principal normal stresses and the maximum shear stress on element D located on the web right below the top flange and near the fixed support. Neglect the weight of the beam, (b) Repeat Part a atcentroid C (sec figure). See Table F-l(b), Appendix F, for beam properties
Segments A B and BCD of beam A BCD are pin connected at x = 4 m. The beam is supported by a sliding support at A and roller supports at C and D (see figure). A triangularly distributed load with peak intensity of SO N/m acts on EC. A concentrated moment is applied at joint D. (a) Find reactions at supports A, C, and D. (b) Find internal stress resultants N, Y, and Mat x = 5m. (c) Repeat parts (a) and (b) for die case of the roller support at C replaced by a linear spring of stiffness kr™ 200 kN/m (see figure).
A reinforced concrete slab (see figure) is reinforced with 13-mm bars spaced 160 mm apart at d = 105 mm from the top of the slab. The modulus of elasticity for the concrete is Ec= 25 GPa, while that of the steel is £s = 200 G Pa. Assume that allowable stresses for concrete and steel arecrac = 9.2 MPa and us = 135 MPa. l()5 mm Find the maximum permissible positive bending moment for a l-m wide strip of the slab. What is the required area of steel reinforcement, A^ if a balanced condition must be achieved? What is the allowable positive bending moment? (Recall that in a balanced design, both steel and concrete reach allowable stress values simultaneously under the design moment.)
A cantilever beam(Z, = 6 ft) with a rectangular cross section (/> = 3.5 in., h = 12 in.) supports an upward load P = 35 kips at its free end. (a) Find the state of stress ((7T, o^., and r in ksi) on a plane-stress element at L/2 that is i/ = 8 in. up from the bottom of the beam. Find the principal normal stresses and maximum shear stress. Show these stresses on sketches of properly oriented elements. (b) Repeat part (a) if an axial compressive centroidal load N = 40 kips is added at B
A vertical pole of solid, circular cross section is twisted by horizontal forces P = 5kN acting at the ends of a rigid horizontal arm AB (see figure part a). The distance from the outside of the pole to the line of action of each force is c = 125 mm (sec figure part b) and the pole height L = 350 mm. (a) If the allowable shear stress in the pole is 30 MPa, what is the minimum required diameter dminof the pole? (b) What is the torsional stiffness of the pole (kN · m/rad)? Assume that G = 28 GPa. (c) If two translation al springs, each with stiffness k =2550 kN/m, are added at 2c/5 from A and B (see figure part c), repeat part (a) to find dmin. Hint: Consider the pole and pair of springs as "springs in parallel."
A bimetallic beam used in a temperature-control switch consists of strips of aluminum and copper bonded together as shown in the figure, which is a cross-sectional view. The width of the beam is LO in,, and each strip has a thickness of 1/16 in. Under the action of a bending moment M = 12 lb-in, acting about the z axis, what are the maximum stresses aaand ecin the aluminum and copper, respectively? (Assume fA, = 10,5 x l0 psi and ecu= 16,8 × 106 psi,)
A reinforced concrete beam (see figure) is acted on by a positive bending moment of M = 160 kN · m. Steel reinforcement consists of 4 bars of 28 mm diameter. The modulus of elasticity for the concrete is Ec= 25 GPa while that of the steel is Es= 200 GPa. Find the maximum stresses in steel and concrete. If allowable stresses for concrete and steel are T2= 9.2 MPa and t1= 135 MPa, respectively, what is the maximum permissible positive bending moment? What is the required area of steel reinforcement, A$ if a balanced condition must be achieved? What is the allowable positive bending moment? (Recall that in a balanced design, both steel and concrete reach allowable stress values simultaneously under the design moment.)