h = 11 W/m K (outside furnace) Consider steady-state heat conduction through a cylindrical wall The fluid on the.inside. Fat 590 K with a heat transfer coefficiect of 23 W/m K. The temperature on the outside surfacc of the wall is known and maintained at 420 K. The heat flow rate through the cylindrical wall is 200 W per 1 m length of the cylinder. If the wall has a thermal conductivity of 0.17 W/m K, what are the inside and outside radii of the cylindrical wall? The rátio of the outside radius to inside radius is 2.

h = 11 W/m K (outside furnace) Consider steady-state heat conduction through a cylindrical wall The fluid on the.inside. Fat 590 K with a heat transfer coefficiect of 23 W/m K. The temperature on the outside surfacc of the wall is known and maintained at 420 K. The heat flow rate through the cylindrical wall is 200 W per 1 m length of the cylinder. If the wall has a thermal conductivity of 0.17 W/m K, what are the inside and outside radii of the cylindrical wall? The rátio of the outside radius to inside radius is 2.

College Physics

10th Edition

ISBN:9781285737027

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter11: Energy In Thermal Processes

Section: Chapter Questions

Problem 40P: The thermal conductivities of human tissues vary greatly. Fat and skin have conductivities of about...

See similar textbooks

Similar questions

What is the internal energy of 6.00 mol of an ideal monatomic gas at 200 ?
For a temperature increase of 10 at constant volume, what is the heat absorbed by (a) 3.0 mol of a dilute monatomic gas; (b) 0.50 mol of a dilute diatomic gas; and (c) 15 mol of a dilute polyatomic gas?
An aluminum rod 0.500 m in length and with a cross-sectional area of 2.50 cm2 is inserted into a thermally insulated vessel containing liquid helium at 4.20 K. The rod is initially at 300 K. (a) If one-half of the rod is inserted into the helium, how many liters of helium boil off by the time the inserted half cools to 4.20 K? Assume the upper half does not yet cool. (b) If the circular surface of the upper end of the rod is maintained at 300 K, what is the approximate boil-off rate of liquid helium in liters per second after the lower half has reached 4.20 K? (Aluminum has thermal conductivity of 3 100 W/m K at 4.20 K; ignore its temperature variation. The density of liquid helium is 125 kg/m3.)
(a) Calculate the rate of heat conduction through a double-paned window that has a 150-m2 area and is made of two panes of 0.800 cm-thick glass separated by a 1.00 cm air gap. The inside surface temperature is 15.0 C, while that on the outside is 10.0 OC. (Hint: There are identical temperature drops across the two glass panes. First find these and then the temperature drop across the air gap. This problem ignores the increased heat transfer in the air gap due to convection.) (b) Calculate the rate of heat conduction through a 1.60-cm-thick window of the same area and with the same temperatures. Compare your answer with that for part (a).
The insulated cylinder shown below is closed at both ends and contains an insulating piston that is flee to move on frictionless bearings. The piston divides the chamber into two compartments containing gases A and B. Originally, each compartment has a volume of 5.0102 m3 and contains a monatomic ideal gas at a temperature of and a pressure of 1.0 atm. (a) How many moles of gas are in each compartment? (b) Heat Q is slowly added to A so that it expands and B is compressed until the pressure of both gases is 3.0 atm. Use the fact that the compression of B is adiabatic to determine the final volume of both gases. (c) What are their final temperatures? (d) What is the value of Q?
An amount of n moles of a monatomic ideal gas in a conducting container with a movable piston is placed in a large thermal heat bath at temperature T1 and the gas is allowed to come to equilibrium. After the equilibrium is leached, the pressure on the piston is lowered so that the gas expands at constant temperature. The process is continued quasi-statically until the final pressure is 4/3 of the initial pressure p1 . (a) Find the change in the internal energy of the gas. (b) Find the work done by the gas. (c) Find the heat exchanged by the gas, and indicate, whether the gas takes in or gives up heat.
The thermal conductivities of human tissues vary greatly. Fat and skin have conductivities of about 0.20 W/m K and 0.020 W/m K, respectively, while other tissues inside the body have conductivities of about 0.50 W/m K. Assume that between the core region of the body and the skin sin face lies a skin layer of 1.0 mm, fat layer of 0.50 cm, and 3.2 cm of other tissues. (a) Find the R-factor for each of these layers, and the equivalent R-factor for all layers taken together, retaining two digits. (b) Find the rate of energy loss when the core temperature is 37C and the exterior temperature is 0C. Assume that both a protective layer of clothing and an insulating layer of unmoving air a absent, and a body area of 2.0 m2.
A bullet of mass 10 g is traveling horizontally at 200 m/s when it strikes and embeds in a pendulum bob of mass 2.0 kg. (a) How much mechanical energy is dissipated in the collision? (b) Assuming that Cv for the bob plus bullet is 3R, calculate the temperature increase of the system due to the collision. Take the molecular mass of the system to be 200 g/mol.
The 10 m long pipe has an inner radius of 70 mm, an outer radius of 80 mm, and is made of stainless steel (k = 15 W / [m ° C]). The temperature of the inner surface is maintained at 150 ° C, and the outer surface is 30 ° C. At constant conditions and there is no heat generation from the pipe, calculate the heat transfer rate that occurs in the pipe wall. = Answer watt.
A 1.0 m * 1.5 m double-pane window consists of two 4-mm-thick layers of glass (k = 0.78 W/m·K) that are separated by a 5-mm air gap (kair = 0.025 W/m·K). The heat flow through the air gap is assumed to be by conduction. The inside and outside air temperatures are 20°C and 220°C, respectively, and the inside and outside heat transfer coefficients are 40 and 20 W/m2·K. Determine (a) the daily rate of heat loss through the window in steady operation and (b) the temperature difference across the largest thermal resistance.
A test is conducted to determine the overall heat transfer coefficient in anautomotive radiator that is a compact cross-flow water-to-air heat exchangerwith both fluids (air and water) unmixed. The radiator has 40 tubesof internal diameter 0.5 cm and length 65 cm in a closely spaced plate-finnedmatrix. Hot water enters the tubes at 90°C at a rate of 0.6 kg/s and leaves at65°C. Air flows across the radiator through the interfin spaces and is heatedfrom 20°C to 40°C. Determine the overall heat transfer coefficient Ui of thisradiator based on the inner surface area of the tubes.
Given that a homogenous material will have the same expansivity properties in every direction. Hence such an object changes its overall size upon heating, but not its shape., a) find the new diameter of a solid brass sphere of radius 0.9535 m when its temperature rises 200°C. b) If the sphere of a) were hollow instead, with inner diameter 0.8535 m, what would be the new inside diameter for the same temperature rise? (the coefficient of linear expansion for brass is 1.93 x 10^(-5)/°C)