HW. A 90-lb load is suspended from the hook as shown in the Figure. If the load is supported by two cables and a spring having a stiffness k = 500 Ib/ft, determine the force in the cables and the stretch of the spring for equilibrium. Cable AD lies in the x-y plane and cable AC lies in the x-z plane. Fc 53 4. 30° k= 500 lb/ft 30° B D 90 lb 90 lb

HW. A 90-lb load is suspended from the hook as shown in the Figure. If the load is supported by two cables and a spring having a stiffness k = 500 Ib/ft, determine the force in the cables and the stretch of the spring for equilibrium. Cable AD lies in the x-y plane and cable AC lies in the x-z plane. Fc 53 4. 30° k= 500 lb/ft 30° B D 90 lb 90 lb

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Determine the tensions T1 and T2 in the strings required to maintain equilibrium for the suspended object weighs W = 38.7N shown in the figure. Take, α = 29.8° & β = 50.2°. The value of Tension, T1 (N) = The value of Tension, T2 (N) =
Determine the tensions T1 and T2 in the strings required to maintain equilibrium for the suspended object weighs W = 48.7N shown in the figure. Take, α = 29.4° & β = 47.5°. a) The value of θ1 (Degree) = b) The value of θ2 (Degree) = c) The value of θ3 (Degree) = d) The value of Tension, T1 (N) = e) The value of Tension, T2 (N) =
PROBLEM 1: Determine the tension in each cable and the components offorce reaction at D needed to support the load. Required: 1. Find Dx (Answer: 1039.230 N), Dy (Answer: 0 N) and Dz (Answer: 0 N) 2. Find Tension AB (Answer: 467.667 N) and Tension (Answer: AC 673.808)
Determine the tensions T1 and T2 in the strings required to maintain equilibrium for the suspended object weighs W = 48.7N shown in the figure. Take, α = 29.4° & β = 47.5°. a) The value of Tension, T1 (N) = b) The value of Tension, T2 (N) =
Before the load is placed on the rigid plate, the top of the central spring is 20 mm lower than the outer springs. Each outer spring is made of 24 turns of 15-mm diameter wire on a mean radius of 60 mm. The central spring consists of 16 turns of 20 mm dimeter wire on a mean radius of 80 mm. If a load P = 5 kN is now placed on the rigid plate. Disregarding the weight of the plate, use G = 83 GPa and use Light spring formula. Determine the maximum shearing stress of the in uter spring. In MPa
The sign has a mass of 150kg with center of mass in G. Draw the free body diagram and determine the components along x,y,z of the reaction in ball joint A as well as the tensile strength in wires BC and BD(Caution : they are two different wires). g=9.81m/s²
The rigid bar is supported by the two short white spruce wooden posts and a spring. If each of the posts has an unloaded length of 1 m and a cross-sectional area of 600 mm2, and the spring has a stiffness of k = 2 MN >m and an unstretched length of 1.02 m, determine the force in each post after the load is applied to the bar.
Statics-Two Force Members 1. Determine the force P required to maintain equilibrium of the pulley system, and the reactions at the ceiling. 2. Assume W=1.25kN 3. Show and clearly label all Free Body Diagram to determine solution.
The post is made of Douglas fir and has a diameter of 100 mm. If it is subjected to the load of 20 kN and the soil provides a frictional resistance that is distributed along its length and varies linearly from w = 4 kN>m at y = 0 to w = 12 kN>m at y = 2 m, determine the force F at its bottom needed for equilibrium. Also, what is the displacement of the top of the post A with respect to its bottom B? Neglect the weight of the post.
The bracket is held to the wall using three A-36 steel bolts at B, C, and D. Each bolt has a diameter of 0.5 in. and an unstretched length of 2 in. If a force of 800 lb is placed on the bracket as shown, determine the force developed in each bolt. For the calculation, assume that the bolts carry no shear; rather, the vertical force of 800 lb is supported by the toe at A. Also, assume that the wall and bracket are rigid. A greatly exaggerated deformation of the bolts is shown.
2-D PROBLEM: A spherical tank with a radius of 3.41m that has a mass of 28928.644kg was supported in the system shown. Assuming friction and the bar weight is negligible, determine the following: β: 21.774° θ: 46.452° 1. The reaction @ point D. 2. Tension @cable BE 3. The x and y-component of the reaction @ A 4. The reaction @ A
The boom AC in the figure rests in a ball and socket joint at A and is held in equilibrium by the cables BE and CD. The load applied at C. Determine the coordinates of D in the YZ plane so that the force in CD will be a minimum. Neglect the weight of the boom and cables. Answers: y = 16 ft; z = -34.7 ft Note:The reaction at ball and socket joint is always represented by the x, y and z components