In Metric, it's likely that nearly all of these quantities would be given to you in standard units. If Vi = 7", m 91 = 9.81 s2' Z1 = 0, = 107kPa (not quite standard). Pa is standard, 1000 Pa = 1 kPa kg • P1 = 1,000 m3 I) Find the value of the constant in the first equation above, and its units. 2) If, at another spot in the flow, everything is the same except z = 0.4m and the flow velocity, find the flow velocity at that point

In Metric, it's likely that nearly all of these quantities would be given to you in standard units. If Vi = 7", m 91 = 9.81 s2' Z1 = 0, = 107kPa (not quite standard). Pa is standard, 1000 Pa = 1 kPa kg • P1 = 1,000 m3 I) Find the value of the constant in the first equation above, and its units. 2) If, at another spot in the flow, everything is the same except z = 0.4m and the flow velocity, find the flow velocity at that point

Name: please help me This assignment is intended to give you practice at doi
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: please help me This assignment is intended to give you practice at doing calculations in different unit systems.Remember, use standard units, get standard units!The following equation is known as Bernoulli's Equation. It relates the pressure, velocit

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Water at 20◦C flows along the streamlines shown in Figure3.11. The (gauge) pressure, velocity, and elevation at Point1 are 15.0 kPa, 1.0 m/s, and 5.02 m, respectively, and thevelocity and elevation at Point 2 are 0.5 m/s and 5.21 m,respectively. Estimate the pressure at Point 2. The given answer was P2 = 13.5 kPa. Show detailed solution pls thank you.
fluıd mechanıcs Values for a fluid flowing in a circular pipe are given in the table.a) by writing Newton's law of viscosity,b) Determine the flow behavior of the fluids, show on the graph that they obey the Newtonian or non-Newtonian flow behavior. Calculate the dynamic viscosity values on the graph.c) If the viscosity of the liquid is 0.121 g/cm3, calculate the kinematic viscosity and convert it to the English Unit system.
cylindrical syringe is filled with oil and the density is 0.855 g/cm3. (a)What is the pressure of the oil that is touching the plunger? Give your answer in Pascals (Pa). use Bernoulli’s equation and the equation of continuity to solve this. b)Find the volumetric flow rate of the oil coming out of the syringe, incm3/s
Fluids mechanics suject In the figure shown, compute the pressure difference between m and n when1. Fluid A is brine (rd = 1.15), the gage fluid is oil (rd = 0.92) and z = 1 m.
In medical work, pressures are often measured in units of mm of H2O because body fluids, including the cerebrospinal fluid, typically have nearly the same density as water. The pressure of the cerebrospinal fluid can be measured by means of a spinal tap. A hollow tube is inserted into the spinal column, and the height to which the fluid rises is observed. If the fluid rises to a height of 160 mm, we write its gauge pressure as 160 mm H2O. (a) Express this pressure in pascals, in atmospheres, and in millimeters of mercury.
In medical work, pressures are often measured in units of mm of H2O because body fluids, including the cerebrospinal fluid, typically have nearly the same density as water. The pressure of the cerebrospinal fluid can be measured by means of a spinal tap. A hollow tube is inserted into the spinal column, and the height to which the fluid rises is observed. If the fluid rises to a height of 160 mm, we write its gauge pressure as 160 mm H2O. a) Sometimes it is necessary to determine whether an accident victim has suffered a crushed vertebra that is blocking the flow of cerebrospinal fluid in the spinal column. In other cases, a physician may suspect that a tumor or other growth is locking the spinal column and inhibiting the flow of cerebrospinal fluid. Such conditions can be investigated by means of the Queckensted test. In this procedure the veins in the patient’s neck are compressed, to make the blood pressure rise in the brain. The increase in pressure in the blood vessels is…
To apply conservation of momentum to describe the motion of a rocket. A rocket is launched into deep space, where gravity is negligible. In the first second, it ejects 1/160 of its mass as exhaust gas and has an acceleration of 16.0 m/s2. What is vg, the speed of the exhaust gas relative to the rocket?
Aeronautical engineers measure the pitching moment M0of a wing and then write it in the following form for use inother cases:M0 =βV2 AC ρ where V is the wing velocity, A the wing area, C the wingchord length, and ρ the air density. What are the dimensionsof the coeffi cient β ?
A fluid flows through a pipe and exits into a container that sits on some scales. At the beginning of the pipe the velocity is 6m/s After 156s, the scale shows 7733N. The pipe outlet diameter is 0.1m, and is four times greater than the inlet. Determine the density of a fluid
State what is Bernoulli's Priciple for Pressure and Velocity? In 8 sentences only.
Use g=32.2 */sec2 (9.81 m/s2) and 60°F (16°C) water unless told to do otherwise.• Google schedule-40 pipe’s thickness at different nominal size to obtain the innerdiameter of the pipe for accurate determinaLon of flow velocity.• Must show your work to support your selecLon. Otherwise, no points will be given.Water flows through a schedule-40 pipe that changes gradually in diameter from 6 in (154mm) at point A to 18 in (429 mm) at point B. The volumetric flow rate is 5.0 *3/sec (130 L/s). The respecLve pressures at points A and B are 10 psia (70 kPa) and 7 psia (48.3 kPa). All lossesare insignificant. What are the direcLon of flow and velocity at point A? (A) 3.2 */sec (1 m/s); from A to B(B) 25 */sec (7.0 m/s); from A to B(C) 3.2 */sec (1 m/s); from B to A(D) 25 */sec (7.5 m/s); from A to B
The sketch shows an oil manometer that is connected between two pipes which transport water. The density of water can be taken as 998kg/m3, the specific gravity of glycerol is 0.76 and atmospheric pressure is 100 kPa. The respective dimensions (as shown on the sketch) are given below: h1 = 0.17 m h2 = 350 mm h3 =15cm. If the pressure gauge gives a reading of 19 kPa, what is the absolute pressure in pipe B?