In US units, the main challenge is that most quantities would not be given in standard units. If vị = 12 mph (not standard) 91 = 32.24 (standard) %3D Z1 = 0 inches (not standard) P = 16 psi (not standard) lb P1 = 8.354 gallon I) Find the value of constant in the first equation, and its units. Do NOT convert to metric. Convert to US standard units, and do the calculation using US units. Show your process 2) If, at another spot in the flow, everything is the same except the flow velocity and z = 18 inches (not standard), determine the flow velocity at that point (in whatever unit you like). Once again, do this calculation using US units.

In US units, the main challenge is that most quantities would not be given in standard units. If vị = 12 mph (not standard) 91 = 32.24 (standard) %3D Z1 = 0 inches (not standard) P = 16 psi (not standard) lb P1 = 8.354 gallon I) Find the value of constant in the first equation, and its units. Do NOT convert to metric. Convert to US standard units, and do the calculation using US units. Show your process 2) If, at another spot in the flow, everything is the same except the flow velocity and z = 18 inches (not standard), determine the flow velocity at that point (in whatever unit you like). Once again, do this calculation using US units.

Name: Please help me In US units, the main challenge is that most quantities
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: Please help me In US units, the main challenge is that most quantities would not be given in standard units. IfV112 mph (not standard)9132.2 (standard)s2Z1= 0 inches (not standard)P116 psi (not standard)lbP1 = 8.354gallonI) Find the value of constant

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

At one point in a pipeline the water's speed is 3.00 m/sand the gauge pressure is 5.00×10^4 Pa a) Find the gauge pressure at a second point in the line, 11.0 mm lower than the first, if the pipe diameter at the second point is twice that at the first. Express your answer in kilopascals.
cylindrical syringe is filled with oil and the density is 0.855 g/cm3. (a)What is the pressure of the oil that is touching the plunger? Give your answer in Pascals (Pa). use Bernoulli’s equation and the equation of continuity to solve this. b)Find the volumetric flow rate of the oil coming out of the syringe, incm3/s
fluıd mechanıcs Values for a fluid flowing in a circular pipe are given in the table.a) by writing Newton's law of viscosity,b) Determine the flow behavior of the fluids, show on the graph that they obey the Newtonian or non-Newtonian flow behavior. Calculate the dynamic viscosity values on the graph.c) If the viscosity of the liquid is 0.121 g/cm3, calculate the kinematic viscosity and convert it to the English Unit system.
A fluid flows through a pipe and exits into a container that sits on some scales. At the beginning of the pipe the velocity is 6m/s After 156s, the scale shows 7733N. The pipe outlet diameter is 0.1m, and is four times greater than the inlet. Determine the density of a fluid
In medical work, pressures are often measured in units of mm of H2O because body fluids, including the cerebrospinal fluid, typically have nearly the same density as water. The pressure of the cerebrospinal fluid can be measured by means of a spinal tap. A hollow tube is inserted into the spinal column, and the height to which the fluid rises is observed. If the fluid rises to a height of 160 mm, we write its gauge pressure as 160 mm H2O. (a) Express this pressure in pascals, in atmospheres, and in millimeters of mercury.
In medical work, pressures are often measured in units of mm of H2O because body fluids, including the cerebrospinal fluid, typically have nearly the same density as water. The pressure of the cerebrospinal fluid can be measured by means of a spinal tap. A hollow tube is inserted into the spinal column, and the height to which the fluid rises is observed. If the fluid rises to a height of 160 mm, we write its gauge pressure as 160 mm H2O. a) Sometimes it is necessary to determine whether an accident victim has suffered a crushed vertebra that is blocking the flow of cerebrospinal fluid in the spinal column. In other cases, a physician may suspect that a tumor or other growth is locking the spinal column and inhibiting the flow of cerebrospinal fluid. Such conditions can be investigated by means of the Queckensted test. In this procedure the veins in the patient’s neck are compressed, to make the blood pressure rise in the brain. The increase in pressure in the blood vessels is…
To apply conservation of momentum to describe the motion of a rocket. A rocket is launched into deep space, where gravity is negligible. In the first second, it ejects 1/160 of its mass as exhaust gas and has an acceleration of 16.0 m/s2. What is vg, the speed of the exhaust gas relative to the rocket?
Fluids mechanics suject In the figure shown, compute the pressure difference between m and n when1. Fluid A is brine (rd = 1.15), the gage fluid is oil (rd = 0.92) and z = 1 m.
The modern engineering design and operation of fluid flow processes were developed using the Bernoulli’s principle. The fluid transport conditions, such as flow velocity and pressure in z-direction, can be related using the Bernoulli equation, expressed as ρ V2/2 + ρ g z + P = constant (Q1) 1. Explain the physical meaning of Bernoulli equation and list any assumptions to obtain Equation (Q1). 2. Explain the Venturi flow meter developed using the Bernoulli equation.
Use g=32.2 */sec2 (9.81 m/s2) and 60°F (16°C) water unless told to do otherwise.• Google schedule-40 pipe’s thickness at different nominal size to obtain the innerdiameter of the pipe for accurate determinaLon of flow velocity.• Must show your work to support your selecLon. Otherwise, no points will be given.Water flows through a schedule-40 pipe that changes gradually in diameter from 6 in (154mm) at point A to 18 in (429 mm) at point B. The volumetric flow rate is 5.0 *3/sec (130 L/s). The respecLve pressures at points A and B are 10 psia (70 kPa) and 7 psia (48.3 kPa). All lossesare insignificant. What are the direcLon of flow and velocity at point A? (A) 3.2 */sec (1 m/s); from A to B(B) 25 */sec (7.0 m/s); from A to B(C) 3.2 */sec (1 m/s); from B to A(D) 25 */sec (7.5 m/s); from A to B
Consider air having standard sea level density is flowing through a wind tunnel. At the entrance of the wind tunnel, the velocity is 44 m/s. At the throat, the velocity is 167 m/s. Determine the density at the throat if the throat area is 43% of the area at the entrance. Provide answer in standard metric units. Round off answer to the nearest thousandths.
A two dimensional, steady, incompressible and potential flow field of water (ρ=1000 kg/m3) is given with velocity components u and v. If the velocity component, u is given as u=1,5xy m/s with the magnitude of maximum pressure in the field as 42156 Pa. a) At x=+1 m and y=+2 m point, what is the magnitude of the velocity component v (in m/s)? (Please use 2 decimal digits in your answer) b) At x=+1 m and y=+2 m point, what is the magnitude of dynamic pressure (in Pa)? (Please do not use any decimal digit in your answer) c) At x=+1 m and y=+2 m point, what is the magnitude of static pressure (in Pa)? (Please do not use any decimal digit in your answer)