Inside a piston cylinder is 1 kg of pure water at 22°C. The piston is 12 cm in diameter and has a weight of 17 kgs. (State A) The pressure applied remains constant but heat is added to the water until the piston until it reaches the stoppers at a volume of 0.3 m^3. (State B) At constant volume, more heat is added until the temperature of the water reaches 300°C. (State C) A. Determine the quality of the fluid at State B. B. Determine the mass of the vapor at State B. C. Determine the pressure at State C.

Inside a piston cylinder is 1 kg of pure water at 22°C. The piston is 12 cm in diameter and has a weight of 17 kgs. (State A) The pressure applied remains constant but heat is added to the water until the piston until it reaches the stoppers at a volume of 0.3 m^3. (State B) At constant volume, more heat is added until the temperature of the water reaches 300°C. (State C) A. Determine the quality of the fluid at State B. B. Determine the mass of the vapor at State B. C. Determine the pressure at State C.

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter8: Natural Convection

Section: Chapter Questions

Problem 8.3P

See similar textbooks

Similar questions

The tip of a soldering iron consists of a 0.6-cm- diameter copper rod, 7.6 cm long. If the tip must be 204C, what are the required minimum temperature of the base and the heat flow, in watts, into the base? Assume that h=22.7W/m2KandTair=21C.
A 2.5 kg of gas at temperature 300 oK expands isothermally from an initial volume of 300 L to 600 L (a) What is the work done by the gas? (b) Estimate the heat added to the gas?
A 90-kg man had two hamburgers, a regular serving of french fries, and a 200-ml Coke for lunch (Fig. 4–43). Determine how long it will take for him to burn the lunch calories off (a) by watching TV and (b) by fast swimming. What would your answers be for a 45-kg man?
The piston-cylinder system shown in the figure contains water at 1 MPa and 300°C,and secured by a pin initially. Spring at this first state is unloaded. Density of the piston materialis 5000 kg/m3, atmospheric pressure is 95 kPa and gravitational acceleration is 9.8 m/s2. a) Whatis the state of water, and its mass at this state? Now, the pin is removed and piston is free tomove. When the equilibrium is reached, volume of water is doubled. During this process, assumepiston-cylinder system is isothermal. b) What is the pressure at this second state? c) What is thespring constant in N/m? Finally, the piston-cylinder system is cooled down so that the piston canbe secured back again using the pin (i.e., returns to its initial position.) d) What is the pressureand temperature at this third state, find the quality of water if applicable? e) Draw the wholeprocess in a P-v diagram, clearly indicate the direction of each process and label each stat
A cylinder contains an amount of gas. At pressure of 460 kPa and at temperature of 27 ̊C, thegas occupies a volume of 0.08 m3. It is then compressed according to Boyle’s law until its pressureis 1.2 MPa, and then expanded according to Charles’ Law until its volume is 0.05 m3. Calculate thefinal temperature of the gas.
0.5 kg of superheated steam (2bar and 200°C is compressed isothermally until it becomes saturated steam. What The enthalpy change in this process is
An insulated piston-cylinder device contains 4.5 m3 of water with a quality equal to 0.5 at aconstant pressure of 300 kPa. Water is stirred by a paddle wheel while electrical current flowsthrough a resistor placed in the water. During this constant-pressure process, the paddle wheelwork amounted to 1000 kJ and electrical work from the resistor amounted to 19000 kJ. What isthe temperature of the water in its final state? Show the process on a P-v diagram with respectto saturation lines.
A 50 g ice cube. Initially at 0o C. is dropped into a aluminum cup (mass 100 g.) containing 350 g of water at 20o C. What is the final temperature of the water?
A piston-cylinder arrangement contains air at pressure of 1 MPa and expands according to a process represented by a straight line on p-V diagram. The final pressure is 0.1 MPa. Calculate the work done by the air if the stroke is 0.2 m and the diameter of the piston is 0.4 m?
A cylinder is fitted with a freely movable piston of area 1.20e-2m^2 and negligible mass. The cylinder below the piston is filled with a gas. At state 1 the gas has volume 1.50e-3m^3, pressure 1.02e5Pa, and the cylinder is in contact with a water bath at a temperature of 0.0C. The gas is then taken through the following four step process. - A 2.50kg metal block is placed on top of the piston, compressing the gas to state 2, with the gas still at 0.0 C. - The cylinder is then brought in contact with a boiling water bath, raising the gas temperature to 100C at state 3. - The metal block is removed and the gas expands to state 4 still at 100C. - Finally, the cylinder is again placed in contact with the water bath at 0C, returning the system to state 1. a) Determine the pressure of the gas in state 2. b) Determine the volume of the gas in state 2. C) Determine the volume of the gas in state 4. Answer all parts, ABC
Properties of Pure Substancies What is the specific internal energy of water at 50 kPa and 20°C?
A piston-cylinder device contains 0.15kg of air initially at 2 MPa and 350oC. The air is first expanded isothermally to 500 kPa, then compressed polytropically with a polytropic exponent of 1.2 to the initial pressure, and finally compressed at the constant pressure to the initial state. a. Indicate knowns and unknows for each state as well as what type ofprocess is performed to get from one state to another. State anyassumptions b. Determine the boundary work for each processc. Determine the net work of the cycled. Draw the P-v diagram for each process