PROBLEM SET #4 EFFECTIVE STRESSES IN SOIL Problem 4. A 20m thick submerged saturated clay layer has water content of 57%. The specific gravity of the solid particle is 2.84. 1. Determine the density of the clay in kg/m³. 2. Determine the total vertical stress at the bottom of the clay layer in kpa. 3. Determine the effective vertical stress at the bottom of the clay layer in kpa.

PROBLEM SET #4 EFFECTIVE STRESSES IN SOIL Problem 4. A 20m thick submerged saturated clay layer has water content of 57%. The specific gravity of the solid particle is 2.84. 1. Determine the density of the clay in kg/m³. 2. Determine the total vertical stress at the bottom of the clay layer in kpa. 3. Determine the effective vertical stress at the bottom of the clay layer in kpa.

Principles of Geotechnical Engineering (MindTap Course List)

9th Edition

ISBN:9781305970939

Author:Braja M. Das, Khaled Sobhan

Publisher:Braja M. Das, Khaled Sobhan

Chapter9: In Situ Stresses

Section: Chapter Questions

Problem 9.12P

See similar textbooks

Similar questions

Caculate the total, neutral and effective stress (kPa) at the base of each soil layer listed below. Assume the water table rest 4 m below ground surface and that there is a capillary rise of 1 m above the water table. Provide your answers in kPa to 1 decimal place. Use 9.81 kN/m3 as the unit weight of water. Total Neutral Effective Silty Sand: 5m thick, γt = 17.5 kN/m3, γsat = 18.5 kN/m3, Blank 1 Blank 2 Blank 3 Clay: 4m thick, γt = 16.5 kN/m3, γsat = 17.8 kN/m3, Blank 4 Blank 5 Blank 6 Sand: 6m thick, γt = 17.3 kN/m3, γsat = 18.1 kN/m3, Blank 7 Blank 8 Blank 9
Solve the following problems. Provide complete solutions and summary of answers. The water table in soil deposit is 2 meters below the ground surface. The soil above the water table has a dry unit weight of 14.85 kN/cu. Meter. The saturated unit weight of the soil is 20.58 kN/cu.meter. Determine the following: a. Total Stress at a point 4.80 meters below the ground b. Total Pore pressure 4.80 meters below the ground c. Total effective stress at a point 4.80 meters below the ground.
A rectangular footing (4.89 x 4.38 m.) is placed 1.21 m. below the ground surface. The soil arrangement is composed of sand (ground) for the first 6.52 meters and followed by clay for the next 6.98 meters. The force acting on the footing is 10,293 kN. Determine the resulting stress increase at the midheight of the consolidating layer in kPa. Assume a 2V:1H pressure diagram. Unit weight of sand = 16.1 kN/m3. Unit weight of clay = 18.7 kN/m3. Use stored value. Answer in five decimal places.
A uniform loading of 150kPa is applied at a 28 m Χ 28 m area. Please calculate the consolidation settlement of the clay layer used the middle of the clay layer to estimate the stress increment with the influence factor method). Cc = 0.4, Cs = 0.04, preconsolidation stress is 150 kPa and unit weight of water is 10 kN/m3. What is the settlement at the corner and center of the loading? What is the differential settlement between the corner and the center?
A clay formation having a depth of 4 m. underlies a sand formation having a depth of 3 m. The dry unit weight of sand is 16.5 kN/m3 and the saturated unit weights of clay and sand are 20.4 kN/m3 and 19.6 kN/m3 respectively. The groundwater table is at the interface of the sand and clay. Compute the effective stress at the bottom of clay. Use 3 decimal places in MPa.
A rectangular footing (4.14 x 4.43 m) is placed 1.38 m below the ground surface. The soil arrangement is composed of sand (ground) for the first 6.29 m and followed by clay for the next 5.94 m. The force acting on the footing is 10581 kN. Determine the resulting stress increase at the midheight of the consolidating layer in kPa. Assume 2V:1H pressure diagram. Unit weight of sand = 16.8 kn/m3. Unit weight of clay = 18.4 kn/m3
Effective Stress in Soil Problem 1. The water table in a certain deposit of soil is at a depth of 2m below the ground surface. The soil consists of clay up to depth of 4m from the ground and below which lies sand. The clay soil is saturated even above the water table: Clay strata: ? = 30%,?? = 2.72 Sandy Strata: ? = 26%, ?? = 2.64 1. Compute the total pressure. 2. Compute the pore water pressure. 3. Compute the effective stress pressure at a depth of 8m below the ground surface
Use unit weight of water = 10kN/m3 in the following questions. A soil profile is shown in Figure Q2(c). If a uniform distributed load of 50 kN/m2 is applied at the ground surface, compute the average settlement of the clay layer caused by primary consolidation if; i)Determine the existing overburden effective stress at mid of clay layer ii) Settlement in clay if, the clay is normally consolidated, given Cc = 0.0085(LL-10) iii) Settlement in clay if, the preconsolidation pressure, pc’=200 kN/m2, given Cr=1/5Cc. Use Cc obtained in part (ii).
A uniform soil deposit has a dry unit weight of 15.6 kN/m³ and a saturated unit weight of 17.2 kN/m³. The groundwater table is at a distance of 4 m below the ground surface. Point A is at a depth of 6 m below the ground surface. If the water table rises by 3.5 m, determine the change in effective stress at A. Indicate if it is maintained, increased or decreased.
A saturated clay layer has a thickness of 10 meters with a water content of 51% and a specific gravity 2.72. Determine the following: 1. Saturated unit weight of the clay * a. 21.46 kN/m³ b. 18.12 kN/m³ c. 16.87 kN/m³ d. 14.95 kN/m³ 2. total stress at depth of 10 meters a. 122.1 kPa b. 151.3 kPa c. 168.7 kPa d. 142.5 kPa 3. Effective stress at depth of 10 meters a. 42.1 kPa b. 70.6 kPa c. 68.7 kPa d. 82.5 kPa
Give the correct option In a drained triaxial test on consolidated clay the stress and angle are as follows: Deviator stress is 20 lb/in2 and friction angle is 21°. Calculate the effective confining pressure at failure?a) 21 lb/in2 b) 22.2 lb/in2 c) 25.4 lb/in 2 d) 17.9 lb/in2
Situation 3:The water table in a certain deposit of soil is at a depth of 2m below the ground surface. The soil consists of clay up to depth of 4m from the ground and below which lies sand. The clay soil is saturated even above the water table:Clay strata: ? = 30%, ?? = 2.72Sandy Strata: ? = 26%, ?? = 2.64 1. Compute the total pressure.2. Compute the pore water pressure.3.Compute the effective stress pressure at a depth of 8m below the ground surface.