Q: A six pole DC series generator ruining at 104,66 rad/s, supplies resistive load 26 Kw 0.97 N constant resistance, the flux per pole is 0.02 Wb.What will be the new generated power if the rotor speed increased to (20%) ?, and the flux per pole increased to (80%), armature resistance is 0.037 Q and series field resistance is 0.047 2.Assume that the armature current remains constant at all cases.

Q: A six pole DC series generator ruining at 104,66 rad/s, supplies resistive load 26 Kw 0.97 N constant resistance, the flux per pole is 0.02 Wb.What will be the new generated power if the rotor speed increased to (20%) ?, and the flux per pole increased to (80%), armature resistance is 0.037 Q and series field resistance is 0.047 2.Assume that the armature current remains constant at all cases.

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter11: Transient Stability

Section: Chapter Questions

Problem 11.3P

See similar textbooks

Similar questions

Q/ dc shunt generator 4 pole with 500 condcutor , wave running at speed 1000 r.p.m the resistance of armature and field are 0.02 , 55 ohm and delivering load 43.12kwatt at terminal voltage 220 volt, the iron losses is 750 watt 1-Torque developed by the prime mover .........and The torque developed by the armature ........... when running at 1000 r.p.m * 2-The load current ,,,,,,,,,,,,when the speed drops to 800 r.p.m. if If is unchanged ? * 3-Output of the prime motor…….kwatt * 4-Mechanical , electrical and overall efficiency …….. * 5-Flux per pole is......... wb *
A short shunt compound generator supplies a load of 10 kW at 200 V through a pair of feeder and series field resistance 0.10 ohm. Armature resistance, shunt field resistance and series field resistance are 0.01 ohm, 52.2 ohms and 0.10 ohm, respectively. If the core friction and windage losses amount to 631 watts, the BHP of the driving engine is nearest to
The armature of a 6-pole separately excited dc generator is triplex wave wound with 534 conductors. This machine delivers power to the load at 200V while being driven at 900rpm. At this load, the armature circuit dissipates 640W. If the flux of this generator is 180-mWb, determine the kW rating of the load served. Assume a total brush drop of 2V.
A lap wound dc generator having 50slots with 15conductors per slot generated at no led emf of 400v when running at 1000 rpm suppose if the same generator is desired to genate 220v on open circuit. Suggest the speed at which it has to be rotated
A 3 phase 4MVA, 12 kV star connected synchronous generator has Zs= 0.8+J30 ohm. Using circle diagram only, find: 1. The output power developed at unity power factor with excitation equal to 1.25 of rated voltage. 2. The load angle and power factor if the generator supplies (1500 KW) at rated voltage and excitation lequal to (1.2) of rated voltage. 3. Repeat part (2) when .armature resistance is neglected
A shunt generator supplies a 31kW load at 230V through cables of resistance, R = 122mΩ. If the field winding resistance, Rf =50Ω and the armature resistance, Ra =51mΩ. Determine the following below: The terminal voltage is, Answer and unit for part 1 The e.m.f. generated in the armature is,
Show that an alternator running in parallel on constant-voltage and frequency bus-bars has a natural time period of oscillation. Deduce a formula for the time of one complete oscillation and calculate its value for a 5000-kVA, 3-phase, 10,000-V machine running at 1500 r.p.m. on constant 50-Hz bus-bars. The moment of inertia of the whole moving system is 14,112 kg-m2 and the steady short-circuit is five times the normal full-load value. ANSWER IS [1.33 second]
Q2)A. Explain compound DC generator, also describe its types and terminal characteristics of compound DC generator. proper explanation and diagram
A long shunt compound generator delivers 100 A at 250 V. The armature, shunt field and series field resistances are 0.02 Ohms, 50 Ohms and 0.05 Ohms respectively. If the Break Horse Power (BHP) or the power developed by the shaft torque of the driving engine is 40, determine the stray loss.
Q2: A500 kW, 500 V, 10 poles d.c generator has lap wound armature Find the electrical angle shift of brushes when AT4 / pole = 208 AT. If the ATC for same generator when connected as wave wound is 2600 AT when the brushes on G.N.A.
b. With the aid of mathematical expressions where necessary, explain the following terms with respect to squirrel cage induction motorsi. Stray Lossesii. Air gap Poweriii. Rotational lossesiv. Friction and Windage lossesv. Stator Copper lossesvi. Rotor Copper lossesvii. Mechanical Losses
A long-shunt, four pole, 1500-W, 250-V, duplex wave-wound DC compound generator with the rated speed of 500 r.p.m., has a shunt field resistance of 100 Ω, a series field resistance of 0.05 Ω and an armature resistance of 0.2 Ω. If the flux per pole is 48.798 mWb and a total of 620 conductors, calculate the following: (a) the generated voltage, (b) the field currents, (c) the power generated in the armature.