I need the answer as soon as possible Question 11. Discuss the working principle of a linear variable differential transformer.2. An LVDT has the following data: Vin = 6.3 V, Vout =+/- 5.2 v, displacement range = +/-0.5 in. Calculate the displacement when Vout = +2.6 V.Question 21. Namethe metal combinations of a thermocouple thermometer to measure temperaturesfrom-270 to 1370 °C:)2. When the cold junction of a thermocouple thermometer is at 5°C and the hot junctuon at110 °C, the millivoltmeter shows a deflection of 3.5 mV towards the left. The hotjunction is now put in an unknown temperature while maintaining the cold junction at5°C. The millivoltmeter now shows a deflection of 4.7 mV towards the left. Calculate theunknown temperature.

Question 1 : 1) Linear variable differential transformer : LVDT is an electromechanical device…

Question 1 1. Discuss the working principle of a linear variable differential transformer. 2. An LVDT has the following data: Vin = 6.3 V, Vout =+/- 5.2 V, displacement range = 0.5 in. Calculate the displacement when Vout = +2.6 V. +/-

Question 1 1. Discuss the working principle of a linear variable differential transformer. 2. An LVDT has the following data: Vin = 6.3 V, Vout =+/- 5.2 V, displacement range = 0.5 in. Calculate the displacement when Vout = +2.6 V. +/-

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter3: Power Transformers

Section: Chapter Questions

Problem 3.16P: A single-phase, 50-kVA,2400/240-V,60-Hz distribution transformer has the following parameters:...

See similar textbooks

Related questions

Q: A 240/60 V, single-phase, ideal transformer is to supply power to a load rated at 90 V, 60 Hz. What…

Q: Explain the working principle of a transformer with a neat diagram and derive its EMF equation.

Q: If the open circuit voltage is 225V and the full load voltage is 200V, then the percentage…

Q: 4.20 A transformer is rated at 2,200:220 volts and 60 cycles per second. If the transformer is used…

Q: 7. The Maximum Power Condition in DC Motors is -V/2. Is that accepted in practice? Why? 8…

A: As per Bartleby guidelines we are allowed to solve only one question, please ask the rest again.

Q: Flag this question for future reference What is the test that can be conducted in the laboratory to…

A: In this question we have to determine in which test transformer impedance drops are dependent on…

Q: Consider a single phase 2-winding 150 kVA, 2400/240 V, 60 Hz transformer with Reg = 0.00425 N, Xeq =…

A: In this question, Find the efficiency of the transformer If it's operated at rated current and…

Q: 2- At no-load the power input to transformer equal to 3- The value of resistance between primary and…

A: Note:- as per our company guidelines we are supposed to answer only first three subparts in case of…

Q: From the short circuit test and open circuit test in #19 and #20, the equivalent circuit of a…

Q: Discuss the relationship between the operating frequency and the transformer size? Through your…

A: Considering the EMF equation of the transformer, E=4.44×f×Bm×N×A Here, E is emf, f is frequency, Bm…

Q: A certain 60-Hz, 20-kVA, 8000/240 V-rms transformer is operated with a short-circuited secondary and…

A: Calculating source voltage Calculating equivalent impedance

Q: The equivalent circuit impedances of a 20-kVA, 8000/240-V, 60-Hz transformer are to be determined.…

Q: C3 (i). Draw the No-load phasor diagram both ideal and practical transformer and mention all…

A: Transformer is a static electrical device which transfers power from one circuit to another circuit…

Q: A transformer takes a No load current of 0.29 A and power factor of 0.405 lag, when its primary is…

A: Given, No load current (Io)= 0.29 A No load power factor= 0.405 lagging No load supply voltage…

Q: 1. The equivalent circuit impedances of a 20-kVA, 800CV240-V, 60-Hz transformer are to be…

A: Since we are allowed to solve only the first question, The below solution contains answer for the…

Q: step-down transformer has a ratio of transformation of 10:1 and is connected to a 2,300- V, 60 hz ac…

A: In this question we will find secondary voltage, primary current , power input and output... Note:-…

Q: A 2320.2 VA step-down transformer has the following parameters as referred to the primary side:…

Q: Q/ An 11,000/230-V, 150-kVA, 50-Hz, 1- phase transformer has a core loss of 1.4 kW and full-load…

A: Given, Full load KVA=150KVA frequency, f=50Hz core loss=1.4kW full load copper loss = 1.6kW

Q: QI: Fill in the blanks for the following: 1- The transformer called step-up transformer, when the…

A: Fill in the blanks about Related to transformer and DC machines

Q: A 3 kava, 500/250 V, 50 Hz, step-down transformer has the following parameters: Re1 = 3.5 ohm, Xe1 =…

A: A 3 KVA, 500/250 V, 50 Hz, step-down transformer parameters: Re1 = 3.5 ohm, Xe1 = 4.5 ohm, Rc1 =…

Q: An ideal transformer with N, = 2400 and N2 = 400 is connected with an impedance Z2 across winding 2,…

A: In this question, We need to determine the impedance Z2 " Referred to primary side? We know…

Q: 8.(a) A 100 KVA, 50 Hz, 440/11000 V, 1-phase transformer has an efficiency of 98.5% when supplying…

A: Let Pi → Iron losses Pl4→Full load copper losses At full load , 0.8 Power factor efficiency=98.5…

Q: Two tests were performed on a 4-kVA , 200/400 V transformer to in order to determine its efficiency.…

Q: 2. Sketch a simplified equivalent circuit of a transformer

A: Electrical machines can be either generator, transformer or motors. They can be either Ac machines…

Q: 2. What measures are taken for cooling of the transformer? How can you overcome the effect of…

A: No transformer is genuinely an 'ideal transformer' and thus each will cause a few misfortunes, the…

Q: A transformer has 500 primary turns and 3000 secondary turns. If the primary voltage is 240V, the…

A: Find explanation below

Q: 1. An ideal transformer with N, 2400 and N2 = 400 is connected with an imped %3D across winding 2,…

Q: A single-phase transformer, with primary turns of 500, is delivering full-load of 80 kW at a lagging…

A: output power Po= 80 KW N1= 500 I2= 227 A ; cos ∅ =0.8 Po= 80 x 103 V2I2 cos ∅ = 80 x 103…

Q: A 23 KVA, 2300/230 V, 60 Hz step down transformer has the following resistance and leakage reactance…

A: A transformer is an electrical machine which is used in AC circuit to either step up or step down…

Q: The information shown in the table below was obtained when a 60-VA, 120/208 V, 60 Hz transformer was…

A: Given, Power Rating = 60 VA Voltage ratings of the transformer 120/208 V Core loss components from…

Q: A 15 kVA, 2300/230 volt transformer is under test. With the low side supplied with rated voltage and…

Q: Assume that a 250-kVA distribution transformer is used for single-phase pole mounting. The…

A: Given Data: V1 = 7200 V V2 = 2520 V Zpu = 0.035 pu S = 250 kVA current in HV winding Ihv = 0.7…

Q: What is an autotransformer? What is the main advantage of an autotransformer over a regular…

A: Transformer is a device that transfers power from one circuit to another without changing the…

Q: Determine the magnitude of the series impedance parameters of Transformer(Req ,Xeq) referred to the…

Q: 3. A 500/250 V, 1-phase transformer has constant losses of 150 W. When delivering an output of 8 kW…

A: In this question we need to find a variable loss of the transformer for given loading conditions. In…

Q: Discuss any three consequences of using a step-down transformer before the transmission of…

A: Consider the general structure of the power system containing generation, transmission, and…

Q: Example 19. Starting from the ideal transformer, obtain the approximate equivalent circuit of a…

A: The Turns ratio of the transformer = 6 The resistance and Reactance on the primary side are R1 =…

Q: (a) A 220 / 400V, 14KVA, 50HZ single phase transformer has at full load, a copper load of 140W. If…

Q: The label values of the single-phase transformer whose electrical equivalent circuit is given…

Q: A Buck converter has an output power of 1950 Watts, and a source voltage of 1000V (the constant DC…

A: For a buck converter Vo=DVs.

Q: Explain what the voltage reg

A: Given We need to explain the down voltage regulation of a power transformer. Please find the below…

Q: Describe the difference of output for a power supply versus control power transformer.

A: to describe the difference of output for a power supply versus control power transformer.

Q: A 7200-240-V, 60-Hz transformer is connected for step-up operation, and a 144/46°-2 load is…

A: Given data, The value of turn ratio is n2n1=7200240. The value of load resistance is R = 144∠46∘ Ω…

Q: A 23-kVA, 2300/230-V, 60-Hz, step down transformer has the following resistance and leakage-…

Q: A two-winding, step-down transformer has a turns-ratio (N2/N1) of 0.5. The primary winding…

A: Transformer is a static device which changes the voltage and current level of the primary and…

Question

I need the answer as soon as possible

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps with 1 images

SEE SOLUTION Check out a sample Q&A here

Similar questions

A two-winding single-phase transformer rated 60kVA,240/1200V,60Hz, has an efficiency of 0.96 when operated at rated load, 0.8 power factor lagging. This transformer is to be utilized as a 1440/1200-V step-down autotransformer in a power distribution system. (a) Find the permissible kVA rating of the autotransformer if the winding currents and voltages are not to exceed the ratings as a two-winding transformer. Assume an ideal transformer. (b) Determine the efficiency of the autotransformer with the kVA loading of part (a) and 0.8 power factor leading.
A single-phase, 50-kVA,2400/240-V,60-Hz distribution transformer has the following parameters: Resistance of the 2400-V winding: R1=0.75 Resistance of the 240-V winding: R2=0.0075 Leakage reactance of the 2400-V winding: X1=1.0 Leakage reactance of the 240-V winding: X2=0.01 Exciting admittance on the 240-V side =0.003j0.02S (a) Draw the equivalent circuit referred to the high-voltage side of the transformer. (b) Draw the equivalent circuit referred to the low-voltage side of the transformer. Show the numerical values of impedances on the equivalent circuits.
An open-delta three-phase transformer system has one transformer center-tapped to provide a neutral for single-phase voltages. If the voltage from line to center tap is 277 V, what is the high-leg voltage?
The transformer of Problem 3.16 is supplying a rated load of 50 kVA at a rated secondary voltage of 240 V and at 0.8 posr factor lagging. Neglect the transformer exciting current. (a) Determine the input terminal voltage of the transformer on the high-voltage side. (b) Sketch the corresponding phasor diagram. (c) If the transformer is used as a step-down transformer at the load end of a feeder whose impedance is 0.5+j2.0, find the voltage VS and the power factor at the sending end of the feeder.
For an ideal transformer, the efficiency is (a) 0 (b) 100 (c) 50
For a short-circuit test on a 2-winding transformer, with one winding shorted, can you apply the rated voltage on the other winding? (a) Yes (b) No
Consider an ideal transformer with N1=3000andN2=1000 turns. Let winding 1 be connected to a source whose voltage is e1(t)=100(1| t |)volts for 1t1ande1(t)=0 for | t |1 second. A2- farad capacitor is connected across winding 2. Sketch e1(t),e2(t),i1(t),andi2(t) versus time t.
What is the purpose of a transformer? Draw the symbols for a transformer.
A 23/230-kV step-up transformer feeds a three-phase transmission line, which in turn supplies a 150-MVA,0.8 lagging power factor load through a step-down 230/23-kV transformer. The impedance of the line and transformers at 230kVis18+j60. Determine the tap setting for each transformer to maintain the voltage at the load at 23 kV.
All values of a transformer are proportional to its __________________ ___________________.
The symbol shown is a(n) a. iron core transformer. b. auto transformer. c. current transformer. d. air core transformer.
Rework Problem 3.14 if the transformer is delivering rated load at rated secondary voltage and at (a) unity power factor, (b) 0.8 power factor leading. Compare the results with those of Problem 3.14. -