11 m(a)11 mOLD TRANSMISSION LİNE0.45 m0.45 m0.45 m0.45 m0.45 m0.45 m14 m14 m(b)NEW TRANSMISSION LINEFigure 2Question 3) A 350-km 450-kV, 60-Hz three-phase uncompensated line-6has a series reactance x=0.34 Q/km and shunt admittance y=j 6.5 x 10S/km (positive-sequence). Calculate,(a) Characteristic impedance Zc(b) (yl)(c) The exact ABCD parameters of the line.(d) The wavelength A in km.(e) The SIL in MW.

A basic Power system network consists of Generation unit, Transmission unit and distribution unit.…

Question 3) A 350-km 450-kV, 60-Hz three-phase uncompensated line has a series reactance x=0.34 Q/km and shunt admittance y=j 6.5 x 10 6 S/km (positive-sequence). Calculate, (a) Characteristic impedance Zc (b) (yl) (c) The exact ABCD parameters of the line. (d) The wavelength A in km. (e) The SIL in Mw.

Question 3) A 350-km 450-kV, 60-Hz three-phase uncompensated line has a series reactance x=0.34 Q/km and shunt admittance y=j 6.5 x 10 6 S/km (positive-sequence). Calculate, (a) Characteristic impedance Zc (b) (yl) (c) The exact ABCD parameters of the line. (d) The wavelength A in km. (e) The SIL in Mw.

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter5: Transmission Lines: Steady-state Operation

Section: Chapter Questions

Problem 5.11P: A 40-km, 220-kV, 60-Hz, three-phase overhead transmission line has a per-phase resistance of...

See similar textbooks

Similar questions

A 60-Hz, single-phase two-wire overhead line has solid cylindrical copper conductors with a 1.5 cm diameter. The conductors are arranged in a horizontal configuration with 0.5 m spacing. Calculate in mH/km (a) the inductance of each conductor due to internal flux linkages only, (b) the inductance of each conductor due to both internal and external flux linkages, and (c) the total inductance of the line.
Transmission line conductance is usually neglected in power system studies. True False
A 40-km, 220-kV, 60-Hz, three-phase overhead transmission line has a per-phase resistance of 0.15/km, a per-phase inductance of 1.3263 mH/km, and negligible shunt capacitance. Using the short line model, find the sending-end voltage, voltage regulation, sending-end power, and transmission line efficiency when the line is supplying a three-phase load of (a) 381 MVA at 0.8 power factor lagging and at 220 kV and (b) 381 MVA at 0.8 power factor leading and at 220 kV.
In terms of line-to-line capacitance, the line-to-neutral capacitance of a single-phase transmission line is Same Twice One-half
A three-phase overhead transmission line is designed to deliver 190.5 M VA at 220 kV over a distance of 63 km, such that the total transmission line loss is not to exceed 2.5 of the rated line MVA. Given the resistivity of the conductor material to be 2.84108-m, determine the required conductor diameter and the conductor size in circular mils. Neglect power losses due to insulator leakage currents and corona.
Three ACSR Drake conductors are used for a three-phase overhead transmission line operating at 60 Hz. The conductor configuration is in the form of an isosceles triangle with sides of 20, 20, and 38 ft. (a) Find the capacitance-to-neutral and capacitive reactance-to-neutral for each 1-mile length of line. (b) For a line length of 175 mi and a normal operating voltage of 220 kV, determine the capacitive reactance-to-neutral for the entire line length as well as the charging current per mile and total three-phase reactive power supplied by the line capacitance.
A 60-Hz, three-phase three-wire overhead line has solid cylindrical conductors arranged in the form of an equilateral triangle with 4-ft conductor spacing. The conductor diameter is 0.5 in. Calculate the positive-sequence inductance in Wm and the positive-sequence inductive reactance in /km.
A 60-Hz, 765-kV, three-phase overhead transmission line has four ACSR 900 kcmil 54/3 conductors per phase. Determine the 60 Hz resistance of this line in ohms per kilometer per phase at 50C.
If the per-phase line loss in a 70-km-long transmission line is not to exceed 65 kW while it is delivering 100 A per phase, compute the required conductor diameter if the resistivity of the conductor material is 1.72108-m.
The 100-km, 230-kV, 60-Hz, three-phase line in Problems 4.18 and 4.39 delivers 300 M VA at 218 kv to the receiving end at full load. Using the nominal circuit, calculate the ABCD parameters, sending-end voltage, and percent voltage regulation when the receiving-end power factor is (a) 0.9 lagging, (b) unity, and (c) 0.9 leading. Assume a 50C conductor temperature to determine the resistance of this line.
The 500-kV, 60-Hz, three-phase line in Problems 4.20 and 4.41 has a 180-km length and delivers 1600 M W at 475 kv and at 0.95 power factor leading to the receiving end at full load. Using the nominal circuit, calculate the (a) ABCD parameters, (b) sending-end voltage and current, (c) sending-end power and power factor, (d) full-load line losses and efficiency, and (e) percent voltage regulation. Assume a 50C. conductor temperature to determine the resistance of this line.
Problem 2. A three-phase transmission line at 60 Hz has its conductors in an asymmetrical triangular arrangement triangular asymmetrical arrangement, where the distances between conductors are 25, 25, and 42 ft. Determine the capacitance to neutral in μF/mi and the capacitive reactance to neutral in ohms-miles. If the line is 150 miles long, find the total reactance in ohms. The conductor diameter is 0.879