Question 4.4A core was mounted in a gas permeameter to measure permeability, and thefollowing laboratory data are obtained from the experiment:Diameter of the core = 2.59 cm- Length of the core = 6.03 cm- Gas viscosity = 0.0148 cPq [cm/s]Р, [КРa]P, [kPa]13.0965.413.57.9144.611.24.1225.36.43.2319.44.1Determine the gas permeability and equivalent liquid permeability of the coreusing the above data (in Darcy units).

Answered: Image /qna-images/answer/2ffaaa37-d8b5-4681-a1d8-2a5879fc5275.jpg

Question 4.4 A core was mounted in a gas permeameter to measure permeability, and the following laboratory data are obtained from the experiment: - Diameter of the core = 2.59 cm %3D - Length of the core = 6.03 cm %3D - Gas viscosity = 0.0148 cP q (cm/s] P, [kPa] P, [kPa] 13.09 65.4 13.5 7.91 44.6 11.2 4.12 25.3 6.4 3.23 19.4 4.1 Determine the gas permeability and equivalent liquid permeability of the core using the above data (in Darcy units).

Question 4.4 A core was mounted in a gas permeameter to measure permeability, and the following laboratory data are obtained from the experiment: - Diameter of the core = 2.59 cm %3D - Length of the core = 6.03 cm %3D - Gas viscosity = 0.0148 cP q (cm/s] P, [kPa] P, [kPa] 13.09 65.4 13.5 7.91 44.6 11.2 4.12 25.3 6.4 3.23 19.4 4.1 Determine the gas permeability and equivalent liquid permeability of the core using the above data (in Darcy units).

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

SAE 10W30 motor oil has a dynamic viscosity of 0.21 kilograms per meter second and a specific gravity of 0.896 (a) What is the density of the motor oil in units of kilograms per cubic meter?
2.22- What is the gage pressure within a d = 2.0 mm spherical droplet of water? 2.23- Water is at 20 °C and the pressure is lowered until boiling is observed. What is the pressure? from Engineering fluid mechanics 11th
nOn 23 January 1960, Jacques Piccard (son of the boat's designer Auguste Piccard) and US Navy Lieutenant Don Walsh achieved the goal of Project Nekton. nThe Trieste is a Swiss-designed, Italian-built deep-diving research bathyscaphe, reached a record maximum depth of 35,797 ft, in the deepest known part of the Earth's oceans, the Challenger Deep, in the Mariana Trench near Guam in the Pacific Ocean. Taking the density of seawater as 64 lbm/ft3, find the sea pressure in psig at the dive depth
A core was mounted in a gas permeameter to measure permeability. Determine the liquid permeability (mD) of the core using gas (in oilfield units). The laboratory data are as follows: Diameter of the core = 3.78 cm -----> (ft) Length of the core = 7.63 cm ---------> (ft) Gas viscosity = 0.0148 cP Flow rate = 9.07 cm3/s -----------------> (bbl/day) P1 = 1.439 atm ----------------------------> (psi) P2 = 1.086 atm ---------------------------> (psi)
A gas at 20 ° C may be considered rarefi ed, deviating fromthe continuum concept, when it contains less than 10 12molecules per cubic millimeter. If Avogadro’s number is6.023 E23 molecules per mole, what absolute pressure (inPa) for air does this represent?
Discuss how you might measure the bulk modulus of a liquid.
C1 (a). A lubricating oil having the dynamic viscosity of 0.055 poise and kinematic viscosity of 0.17 stokes. Calculate (i) the density of oil in kg/m3, (ii) the weight density of oil in N/m3,(iii) the specific gravity, and (iv) the specific volume in m3/kg. C1 (b). Calculate the capillary effect in mm in a glass tube of 4.4 mm diameter, when immersed in (1) water (2) mercury. The values of surface tension in contact with air are 0.0737 N/m and 0.54 N/m respectively. The contact angle for water =00 and mercury =1300. (Enter only the values by referring to the unit given. Also, upload the handwritten answers in the link provided) C1(a).(i).The density of oil in kg/m3 C1(a). (ii) the weight density of oil in N/m3 C1(a). (iii) the specific gravity C1(a). (iv) the specific volume in m3/kg C1 (b). 1.The capillary effect (water) in mm C1 (b). 2.The capillary effect (mercury) in mm
the black sqaure is delta (change) in pressure Assume that p is a function of average velocity V, pipe length L and diameter D, the pipe roughness e (mean height of roughness of the pipe wall, e.g. in microns), and the fluid density . 1.How many nondimensional parameters are needed to define the nondimensional pressure-drop vs. flow relationship in the pipe? 2. Using (D, , and V) as repeating parameters, derive the nondimensional pressure drop and other required parameters to relate p, V, L, D, e , and .
The surface tensions of mercury and water at 60 degrees Celcius are 0.47N/m and 0.0662 N/m, respectively. What capillary height changes will occur in these two fluids when they are in contact with air in a glass tube of radius 0.30mm? Use θ = 130° for mercury, and 0° for water; y = 132.3 kN/m3 for mercury and 9.650 kN/m3 for water. Provide the given along with its solution. (Please write legibly, I did not understand the first solution.)
please show solution step by step with units. SUbject: Thermodynamics, Topic: Procecesses of Gases answer it in 30 mins. also, identify the system
In medical work, pressures are often measured in units of mm of H2O because body fluids, including the cerebrospinal fluid, typically have nearly the same density as water. The pressure of the cerebrospinal fluid can be measured by means of a spinal tap. A hollow tube is inserted into the spinal column, and the height to which the fluid rises is observed. If the fluid rises to a height of 160 mm, we write its gauge pressure as 160 mm H2O. (a) Express this pressure in pascals, in atmospheres, and in millimeters of mercury.
In medical work, pressures are often measured in units of mm of H2O because body fluids, including the cerebrospinal fluid, typically have nearly the same density as water. The pressure of the cerebrospinal fluid can be measured by means of a spinal tap. A hollow tube is inserted into the spinal column, and the height to which the fluid rises is observed. If the fluid rises to a height of 160 mm, we write its gauge pressure as 160 mm H2O. a) Sometimes it is necessary to determine whether an accident victim has suffered a crushed vertebra that is blocking the flow of cerebrospinal fluid in the spinal column. In other cases, a physician may suspect that a tumor or other growth is locking the spinal column and inhibiting the flow of cerebrospinal fluid. Such conditions can be investigated by means of the Queckensted test. In this procedure the veins in the patient’s neck are compressed, to make the blood pressure rise in the brain. The increase in pressure in the blood vessels is…