Scientist 1 analyzed the compounds first then gave it to scientist 2 for the next test. Scientist 2 needs to know the molar mass of the active compound. The concentration of the solution they created is twenty percentw/w from the solid active compound and it has a density of 1.40 grams per millilitre. Ten microliters were taken from this solution and mixed with one hundred ninety microliters of reagent and water. After analyzation, it showed that the compound's concentration is Five times ten raised to negative four M i. Find the concentration of the twenty percentw/w solution. The concentration must be in the form of molarity ii. Explain the reason why the concentration of the solution was expressed as %w/w initially? iii. Determine the active compound's molar mass.

Scientist 1 analyzed the compounds first then gave it to scientist 2 for the next test. Scientist 2 needs to know the molar mass of the active compound. The concentration of the solution they created is twenty percentw/w from the solid active compound and it has a density of 1.40 grams per millilitre. Ten microliters were taken from this solution and mixed with one hundred ninety microliters of reagent and water. After analyzation, it showed that the compound's concentration is Five times ten raised to negative four M i. Find the concentration of the twenty percentw/w solution. The concentration must be in the form of molarity ii. Explain the reason why the concentration of the solution was expressed as %w/w initially? iii. Determine the active compound's molar mass.

EBK A SMALL SCALE APPROACH TO ORGANIC L

4th Edition

ISBN:9781305446021

Author:Lampman

Publisher:Lampman

Chapter88: Column Chromatography

Section: Chapter Questions

Problem 5P

See similar textbooks

Similar questions

You obtain an Unknown Sample from the Stockroom. You begin testing the solution through the steps outlined in the flowchart of the experiment’s PDF file. You first add HCl and centrifuge your mixture. You observe the formation of a white precipitate in the bottom of the test tube. After pouring off the supernatant liquid, you add hot water to the white precipitate. Upon addition of the hot water, you have some white precipitate still at the bottom of the test tube, and the supernatant liquid is poured off. To this liquid, potassium chromate (K2CrO4) is added. Upon this addition of potassium chromate, you observe no formation of precipitate. Which of the following is a valid conclusion to draw at this point? (Choose one.) Select one: 1. Hg22+ is definitely present. 2. Pb2+ is NOT present. 3. Ag+ is definitely present. 4. Pb2+ is definitely present.
A student weighed approximately 1.5 g of an unknown solid acid and carefully placed the sample in a clean, but not necessarily dry, 250.0 mL volumetric flask. The student added deionized water to the flask, swirled the solution until the solid acid dissolved, then added sufficient deionized water to fill the flask to the fill line. A volumetric pipet was used to transfer 25.00 mL of the resulting solution to an Erlenmeyer flask, and 2 – 3 drops of phenolphthalein were added.The student filled the sodium hydroxide buret and titrated the acid solution with standardized 0.1000 M NaOH to the first permanent faint pink color, then repeated the titration a second time.Your instructor will provide the mass of unknown solid acid, as well as the initial and final buret readings for the two titrations. From this data and the information above, you will be able to calculate the molar mass of the unknown acid.The unknown solid acid is diprotic; that is, there are two moles of ionizable H+ ions per…
A student weighed approximately 1.5 g of an unknown solid acid and carefully placed the sample in a clean, but not necessarily dry, 250.0 mL volumetric flask. The student added deionized water to the flask, swirled the solution until the solid acid dissolved, then added sufficient deionized water to fill the flask to the fill line. A volumetric pipet was used to transfer 25.00 mL of the resulting solution to an Erlenmeyer flask, and 2 – 3 drops of phenolphthalein were added.The student filled the sodium hydroxide buret and titrated the acid solution with standardized 0.1000 M NaOH to the first permanent faint pink color, then repeated the titration a second time.Your instructor will provide the mass of unknown solid acid, as well as the initial and final buret readings for the two titrations. From this data and the information above, you will be able to calculate the molar mass of the unknown acid.The unknown solid acid is diprotic; that is, there are two moles of ionizable H+ ions per…
Preparation of 0.25N NaOH Objective: Apparatus and Materials: Procedure : Calculate the exact mass of NaOH needed to prepare 1.0L of 0.25N NaOH for standardization. Show your computations. Using the triple beam balance, weigh the desired amount of NaOH. Place the weighed amount of NaOH into the 500 mL volumetric flask and add distilled water until it reaches the mark. Agitate and transfer the solution into the reagent bottle. Add again distilled water to the same volumetric flask until it reaches the mark and pour it to the same reagent bottle, thus having a total volume of 1.0 L. Label the reagent bottle, 0.25N NaOH. Data and Computations: Conclusion:
You are given a container with Na3PO3 that is reportedly contaminated. You are asked by your supervisor to determine the percent purity of that sample in order to know the next measures to be taken by the plant. The following are the procedures that you need to do: a. Dissolve sample weighing 1 g in 35 mL water. b. Prepare solution with 45 mL 3% w/v HgCl2, 30 mL 10% w/v C2H3NaO2 and 10 mL CH3COOH. c. Digest sample then filter then rinse the precipitate that weighs 0.2857 g. d. Compute for the % purity.
25 ml of pickled brine was taken from an apple pickled with vinegar and diluted to 500 ml, 25 ml of this was taken and acidity was determined with 0.2 N (Factor: 1.05) NaOH. In the main trials, 6.3 ml - 6.5 ml - 6.9 ml, respectively, 0.1 ml base was used in the analysis without using the sample.For example, how many ppm is its acidity?
. The total cation content of natural water is often determined by exchanging the cations for hydrogen ions on an ion exchange resin. The cations are adsorbed to the resin which releases H+ (1:1 exchange) which can then be titrated with a base. A 25.0 mL sample of a natural water is diluted to 100 mL with distilled water and 2.0 g of a cation-exchange resin was added. After stirring, the mixture was filtered and the solid remaining on the filter paper was washed with three 15.0 mL portions of distilled water. The filtrate and washing required 15.3 mL of 0.0202 M NaOH to reach the equivalence pt. Calculate the number of moles of cation present in 1.00 L of sample.
You obtain an Unknown Sample from the Stockroom. You begin testing the solution through the steps outlined in the flowchart of the experiment’s PDF file. You first add HCl and centrifuge your mixture. You observe the formation of a white precipitate in the bottom of the test tube. After pouring off the supernatant liquid, you add hot water to the white precipitate. Addition of the hot water dissolves some of the precipitate, but some white precipitate still remains on the bottom of the test tube. You pour off the supernatant liquid, and add ammonia (NH3) to the remaining precipitate. You now observe the formation of a gray-black precipitate. Which of the following is a valid conclusion to draw at this point? Select one: Hg22+ is definitely present. Pb2+ is definitely present. Ag+ could be present, or Hg22+ could be present, or BOTH could be present. Ag+ is definitely present
You obtain an Unknown Sample from the Stockroom. You begin testing the solution through the steps outlined in the flowchart of the experiment’s PDF file. You first add HCl and centrifuge your mixture. You observe the formation of a white precipitate in the bottom of the test tube. After pouring off the supernatant liquid, you add hot water to the white precipitate. Addition of the hot water dissolves some of the precipitate, but some white precipitate still remains on the bottom of the test tube. Which of the following is a valid conclusion to draw at this point? Pb2+ is definitely present. Hg22+ is definitely present. Ag+ could be present, or Hg22+ could be present, or BOTH could be present. Ag+ is definitely present
A concentration of toxic metals in plant tissue is often found by combusting the material in a furnace and then dissolving the ash in concentrated acid. A 0.5124-gram sample of leaves was combusted to ash and transferred to a 150-mL beaker. A 25-mL portion of concentrated HCl was added and the mixture was heated on a hot plate. Three 5-mL portions of concentration HCl were added over approximately 10 minutes with continued heating in between additions. The resulting mixture was cooled to room temperature and filtered into a 50-mL volumetric flask, which was brought to volume using distilled water and mixed well. From this stock solution, a 10-mL portion was pipetted into a clean 50-mL volumetric flask, brought to volume with distilled water, and mixed. This final solution was analyzed and found to contain 12.1 ppm lead. What are the mass percent of lead in the original plant tissue?
If an instrument gives a response of 1240 for a standard containing 8 ppm of a substance, how much if this substance is in a sample that gives a response of 1705? Are any assumptions needed?
Six 50.0 ml volumetric flask 1 through 6 are labeled. 10.00 ml of 2.00 x 10-1 M Fe(NO3)3 solution was then pipet into each volumetric flask. A 1.00,2.00,3.00,4.00 and 5.00ml of 2.00 x 10-3M NaSCN solution was then pipetted to flask 2 through 6 respectively. A sufficient amount of 0.10 M nitric acid was then added to each flask to make each a total volume of 50.00ml. Hint M1V1=M2V2 a)what would be the concentration of Fe(NO3)3 in 0.10M HNO3? b)what would be the concentration of NaSCN in 0.10M HNO3?