Show the COMPLETE SOLUTIONS and DIAGRAM (T-8) (Cycle) Including the switching of table and Interpolations/extrapolations: NO Calculator Technique and Applications. 1. A steam power plant operates with a boiler output of 20 kg/s steam at 2 MPa, 600°C. The condenser operates at 50°C dumping energy to a river that has an average temperature of 20°C. There is one open feedwater heater with extraction from the turbine at 600 kPa and its exit is saturated liquid. Find the mass flow rate of the extraction flow. If the river water should not be heated more than 5°C how much water should be pumped from the river to the heat exchanger (condenser)? Condenser 7 Ex turbine To river From river To pump 1

Show the COMPLETE SOLUTIONS and DIAGRAM (T-8) (Cycle) Including the switching of table and Interpolations/extrapolations: NO Calculator Technique and Applications. 1. A steam power plant operates with a boiler output of 20 kg/s steam at 2 MPa, 600°C. The condenser operates at 50°C dumping energy to a river that has an average temperature of 20°C. There is one open feedwater heater with extraction from the turbine at 600 kPa and its exit is saturated liquid. Find the mass flow rate of the extraction flow. If the river water should not be heated more than 5°C how much water should be pumped from the river to the heat exchanger (condenser)? Condenser 7 Ex turbine To river From river To pump 1

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter45: Domestic Refrigerators And Freezers

Section: Chapter Questions

Problem 9RQ: The defrost cycle in a domestic refrigerator may be terminated by two methods: ___and___.

See similar textbooks

Similar questions

Solve neatly and draw diagrams. write neatly An regenerative engine receives 68,000 kg/hr of steam having 1 open heater which receives 15,400 kg/h of Bled steam. If the condenser pressure is 0.008 MPa and the open heater pressure is 0.98 MPa find the enthalpy a) at the heater entrance, b) condenser entrance.
Show the COMPLETE SOLUTIONS and DIAGRAM (T-s) (Cycle) including the switching of table and interpolations/extrapolations: NOCalculator Technique and Applications. A smaller power plant produces steam at 3 MPa, 600°C in the boiler. It keeps the condenser at 45°C by transfer of 10 MW out as heat transfer. The first turbine section expands to 500 kPa and then flow is reheated followed by the expansion in the low-pressure turbine. Find the reheat temperature so the turbine output is saturated vapor. For this reheat find the total turbine power output and the boiler heat transfer.THE ANSWER MUST BE: 6487 kW ; 16 475 kW
Thermodynamics PLEASE FILL UP THE TABLE WITH ALL NUMBERS. THANK YOU 9.17 A steam power plant operates with 5 MPa high pressure and boiler exit at 700°C, whereas the condenser exit is at 50°C. Find the cycle efficiency and the pressure in the turbine where the water enters the two-phase region.
Need help with this engineering problem. Steam enters the turbine of a simple vapor power plant with a pressure of 12 MPa and a temperature of 500°C and expands adiabatically to condenser pressure, p. Saturated liquid exits the condenser at pressure p. The isentropic efficiency of both the turbine and the pump is 84%.For p = 100 kPa, determine: (a) the turbine exit quality, in percent.(b) the cycle thermal efficiency, in percent.
A steam cycle operates between 150 bar, 1000 K, and 1 bar. Theturbine and feedpump are perfectly efficient, and, two open feedwaterheaters being used, the splits in the streams through the turbine into theheaters are optimal. Determine(a) The fraction of the total flow that must pass through eachfeedwater heater,(b) The thermal efficiency.Draw T-s and Schematic Diagram.
a) Heat leaks from the air in a kitchen through the walls of a refrigerator into the refrigerated cold space at a rate of 0.3 kW. The refrigerator operates in an ideal vapor compression refrigeration cycle between 1.2 bar and 9 bar. It uses refrigerant R-134a as the working fluid. Determine: i) the mass flow rate of the refrigerant. ii) the compressor power.
1st Step: Evaluate the performance of the Refrigerator 1.Refrigerator 1 operates as a reverse Carnot cycle using R-717 as the refrigerant at aflow of 1.8 kg/s. The condensing and evaporating temperatures are 25 °C and -5 °C, respectively.To evaluate the performance of Chiller 1, you must determine the following performance parameters:project:a) Rate of heat elimination in the condenser (Q );b) The power of the compressor;c) The COP of the cycle.For the energy balance, make the following considerations:- Permanent regime;- Variation of kinetic energy and potentials are negligible;- Compressor and turbine operate adiabatically;- Evaporation and condensation steps do not involve work. Please, make it typeable, written in virtual text, do not do it by hand and do not take a photo, it interferes with the understanding of the lyrics.
A refrigerator uses R22 as the working fluid. And it operates a vapor compression refrigeration cycle between 0.14 and 1.2 MPa. If the mass flow rate is 0.15 Kg/s, determine: a) the flash vaporization, b) the rate of heat removal from the refrigerated space, c) the compressor power in KW, the ratio of heat release to the environment and the COPR.
A power plant using a Rankine power generation cycle and steam operates at a temperature of 81.25°C in the condenser, a pressure of 5 MPa in the boiler and a maximum boiler temp of 775°C. The cycle operates at steady state with a mass flow rate of 2.5kg/s. Use the steam tables in the appendix of Sandler (p. 917 to 925). a.) Draw out the cycle, calculate the work required for the pump, the work output by the turbine, the heat into the boiler, and the heat out of the condenser. b.) What is the efficiency of this power plant? c.) If the turbine was only 89% efficient but still adiabatic (only generates 89% of the calculated work from part b), what is the overall efficiency of the cycle?
PLEASE ANSWER LETTER D AND E WITH COMPLETE SOLUTION, THANK U 1. Steam is the working fluid in an ideal Rankine cycle. The saturated vapor enters the turbine at 8.0 MPa and saturated liquid exits the condenser at a pressure of 0.008 MPa. The net power output of the cycle is 100 MW. Determine for the cycle (a) the thermal efficiency, (b) the mass flow rate of the steam, in kg/h, (c) the rate of heat transfer, into the working fluid as it passes through the boiler, in MW, (d) the rate of heat transfer, from the condensing steam as it passes through the condenser, in MW, (e) the mass flow rate of the condenser cooling water, in kg/ h, if cooling water enters the condenser at 15 DEGREE CELCIUS and exits at 35 DEGREE CELCIUS.
in an ideal reheat cycle, the steam enters the turbine at 30 bar and 500°C after expansion to 5 bar, the steam is reheated to 500°Cand then expanded to the condenser pressure of 0.1 bar. Determine the cycle thermal efficiency, mass flow rate of steam. Take power output as 100 MW.
Water and refrigerant R-12 are the working fluids in a binary cycle. In the steam cycle, superheated vapor enters the turbine with a mass flow rate of 5 kg/s at 4 MPa, 470C and expands isentropically to 150 kPa. The steam passes through a heat exchanger, which serves as the boiler for the refrigerant cycle and the condenser of the steam cycle. The condensate leaves the heat exchanger as saturated liquid at 150 kPa, Refrigerant 12is in an ideal Rankine cycle with refrigerant entering the turbine at 1.5 MPa, 101C and saturated liquid leaving the condenser at 800 kPa. Determine (a) the rate of heat transfer to the working fluid passing through the steam generator of the steam cycle, (b) the net power output of the binary cycle, (c) the mass flow rate of the refrigerant and (d) the rate of heat transfer to the refrigerant cycle.