Provide schematic diagram and solutions. A plane-inclined pad thrust bearing is 160mm wide and 40mm long in the direction ofsliding. The sliding velocity is 6m/s and the bearing is supported so that the inlet filmthickness is always three times the outlet film thickness. A load 18kN is carried by thebearing and Tellus 37 oil is supplied at an inlet temperature of 40°C. Assuming that 80%of the heat generated in the bearing is carried away by the oil, describe the operatingcharacteristics of the bearing (Pm, Q, F, t). Density is 875 kg/m³ and specific heat is c,= 1.880 J/g-K.Table 5.1 Variation of dimensionless coefficients p..Q. W and Ffor a wide hydrodynamic thrust bearing with film thickness ratio h, /h,1.251.51.752.02.18892.252.52.753.03.253.53.754.0K0.250.50.751.01.18891.251.51.752.02.252.52.753.00.13330.20000.23380.25000.25550.25640.25710.25450.25000.24430.23810.2316 0.22500.55560.60000.63640.66670.68040.69230.71430.73330.75000.76470.77780.78950.80000.08840.13120.15110.15890.16020.16010.15770.1533 0.14790.14200.13600.13000.12420.90360.84370.8028 0.7726 0.7542 0.7488 0.7292 0.7122 0.69720.68360.67110.6594 0.6494

Answered: Image /qna-images/answer/ed64925e-3663-41cd-b1cb-30fbc3e9885d.jpg

sliding. The sliding velocity is 6m/s and the bearing is s thickness is always three times the outlet film thickness bearing and Tellus 37 oil is supplied at an inlet tempera of the heat generated in the bearing is carried away by characteristics of the bearing (Pm, Q, F, t). Density is = 1.880 J/g-K. m

sliding. The sliding velocity is 6m/s and the bearing is s thickness is always three times the outlet film thickness bearing and Tellus 37 oil is supplied at an inlet tempera of the heat generated in the bearing is carried away by characteristics of the bearing (Pm, Q, F, t). Density is = 1.880 J/g-K. m

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter3: Transient Heat Conduction

Section: Chapter Questions

Problem 3.10P: 3.10 A spherical shell satellite (3-m-OD, 1.25-cm-thick stainless steel walls) re-enters the...

See similar textbooks

Similar questions

3.10 A spherical shell satellite (3-m-OD, 1.25-cm-thick stainless steel walls) re-enters the atmosphere from outer space. If its original temperature is 38°C, the effective average temperature of the atmosphere is 1093°C, and the effective heat transfer coefficient is , estimate the temperature of the shell after reentry, assuming the time of reentry is 10 min and the interior of the shell is evacuated.
A getter screen consists of a cylinder of length l = 0.3m, diameter d=0.25m and its circular based plate. The getter screen is cooled with liquid nitrogen and coated completely with deposited titanium providing a constantly fresh surface. Sticking probability s=1 for N2 and mean thermal velocity = 470m/s. Find the pumping speed.
When viscous dissipation is appreciable, the energy balance of a convective system must include the viscous effects of the fluid, so a third term is added to the energy balance: A slide bearing (pillow block) can be idealized as a static plate and a plane that moves parallel to it. The rotary axis of such a system has a diameter of 100 mm and rotates at 3600 rpm inside the bearing, which has a gap between the plates of 0.5 mm. The system is lubricated by oil, with a density of 800 kg / m, a viscosity of 0 01 kg / ms and a thermal conductivity of 0:14 W / mk. The top and bottom surfaces of the bearing are at 60 ° C. Considering the viscous effects of the oil, determine a) The maximum temperature of the oil. FC b) Bottom plate heat flux per unit length W / m Write down all assumptions made
What is the pressure drop that arises from a Lid-driven cavity flow?
As part of an industrial pipe system a 6-meter-long by .5 meter inner diameter copper pipeweighing 200kg holds a lubricating oil in place while is heats from 20 deg C to 55 deg C. At thatpoint, the valve opens and allows to oil to flow through. What is the total heat transferrequired? And, what percentage of the heat transferred does the oil and copper each accountfor? (oil density = .9 kg/L , oil specific heat = 1800 J/kgC)
Example 29.18 In an oil cooler of the counter flow type 5000kg.per of oil of specific heat 0.6 are cooled from 40°C to 24°C by means of 6000 kg/hr of water which enter at 15°C. Find the cooling surface required if the overall coefficient of heat transmission is 3000 kcal/ in² hour °C?
A steam reservoir is covered by a rectangular plate (its length is 1 m and width 2 m). The steam temperature is 95o C, and it is in contact with the plate. Over the outside surface of the plate, water is flowing at a speed of 3 m/sec at a temperature of 25o C. What is the mean Nusselt number over the plate? What is the mean heat transfer convective coefficient over the plate? What is the heat transfer rate to the water?