TE-1 At 20.0 C an aluminum sleeve with an inside diameter of 5.000 cm just fits over a steelrod with an outside diameter of 5.000 cm as shown below. Find the size of the in centimetersgapbetween the sleeve and the rod when they are both at 100.0 °C.At 20.0°CAt 100.0°C11.0x10*23.0x10steelUse agand a=%3DC°5.000cmgapaluminumpe here to search99+hpCnce D

Answered: Image /qna-images/answer/ec7ff19d-0688-46f7-be70-5c1f2cf704d3.jpg

TE-1 At 20.0 °C an aluminum sleeve with an inside diameter of 5.000 cm just fits over a steel rod with an outside diameter of 5.000 cm as shown below. Find the size of the gap in centimeters between the sleeve and the rod when they are both at 100.0 °C. At 20.0°C At 100.0°C 11.0x10 23.0x10 steel Use a = and a %3D C° 5.000cm gap aluminum rch

TE-1 At 20.0 °C an aluminum sleeve with an inside diameter of 5.000 cm just fits over a steel rod with an outside diameter of 5.000 cm as shown below. Find the size of the gap in centimeters between the sleeve and the rod when they are both at 100.0 °C. At 20.0°C At 100.0°C 11.0x10 23.0x10 steel Use a = and a %3D C° 5.000cm gap aluminum rch

University Physics Volume 2

18th Edition

ISBN:9781938168161

Author:OpenStax

Publisher:OpenStax

Chapter1: Temperature And Heat

Section: Chapter Questions

Problem 49P: The height of the Washington Monument is measured to be 170.00 m on a day when the temperature is...

See similar textbooks

Similar questions

An underground gasoline tank can hold 1.00 103 gallons of gasoline at 52.0F. If the tank is being filled on a day when the outdoor temperature (and the gasoline in a tanker truck) is 95.0F, how many gallons from the truck can be poured into the tank? Assume the temperature of the gasoline quickly cools from 95.0F to 52.0F upon entering the tank.
A mercury thermometer is constructed as shown in Figure P16.53. The Pyrex glass capillary tube has a diameter of 0.004 00 cm, and the bulb has a diameter of 0.250 cm. Find the change in height of the mercury column that occurs with a temperature change of 30.0C.
The height of the Washington Monument is measured to be 170.00 m on a day when the temperature is 35.0 . What will its height be on a day when the temperature falls to -10.0 ? Although the monument is made of limestone, assume that its coefficient of thermal expansion is the same as that of marble. Give your answer to five significant figures.
An underground gasoline tank can hold 1.00 103 gallons of gasoline at 52.0F. If the tank is being filled on a day when the outdoor temperature (and the gasoline in a tanker truck) is 95.0F, how many gallons from the truck can be poured into the tank? Assume the temperature of the gasoline quickly cools from 95.0F to 52.0F upon entering the tank.
At 18.75 °C a brass sleeve has an inside diameter of 2.21988 cmand a steel shaft has a diameter of 2.22258 cm. It is desired toshrink-fit the sleeve over the steel shaft. (a) To what temperaturemust the sleeve be heated in order for it to slip over the shaft?(b) Alternatively, to what temperature must the shaft be cooledbefore it is able to slip through the sleeve?
At 19.0°C an aluminum ring has an inner diameter of 6 cm, and a brass rod has a diameter of 6.090cm. Keeping the brass rod at 19.0°C,to what temperature must the aluminum ring be heated toallow the ring tojust slip over the brass rod? Final answer should be in F.
One end of an aluminum rod (50 cm long) is maintained at 1000C by immersing in a pot of boiling water and the other end at 00C by an ice-water mixture. If the cross-sectional area of the rod is 1.3 cm2, how much ice will the rod melt in 20 minutes? (thermal conductivity of Al is 205 W/m.0C) a) 0.19 kg b) 1.9 kg c) .019 kg Now consider the same situation, but the 50 cm long rod is half aluminum (25 cm) and half copper (25 cm). The aluminum end is in boiling water. The copper end is in the ice-water mixture. What would be the steady temperature of the Al-Cu junction? a) 50 0C b) 34.75 0C c) 65.25 0C How much ice will the rod melt in 20 minutes? a) 0.025 kg b) 0.25 kg c) 2.5 kg
A coffee, with a temperature of 60 o C, is pour in a glass with diameter of 10 cm and height of 13 cm . The coffee has a continuous heat transfer of 60 W. What is the temperature (in Celsius) of the surface of the glass if convective heat transfer , h, is 50 W/m2-K?
. (II) A brass plug is to be placed in a ring made of iron. At15°C, the diameter of the plug is 8.755 cm and that of theinside of the ring is 8.741 cm. They must both be broughtto what common temperature in order to fit?
Heat is conducted through a slab composed of parallel layers of different conductivities, 0.0050 and 0.0025 cal/cm2-sec-°C/cm and thickness 0.36 and 0.48 cm, respectively. The temperatures of the outer faces of the slab are 96 and 8°C, find the temperature of the interface. (INCLUDE FBD)
A glass coffee pot has a 9.00 cm diameter circular bottom in contact with a heating element that keeps the coffee warm with a continuous 50.0-W heat input. (a) What is the temperature of the bottom of the pot, if it is 2.90 mm thick and the inside temperature is 67.8°C? The thermal conductivity of the pot is 0.84 J/(s · m · °C). *Answer in °C, please
Week 4 #18 A copper bar of thermal conductivity 401 W/(m·K) has one end at 114°C and the other end at 24.0°C. The length of the bar is 0.110 m, and the cross-sectional area is 1.00 × 10−6 m2. If two such bars were placed in series (end to end) between the same constant-temperature baths, what would the rate of heat conduction ? be? ______W