The 100kg object is held by three strings as shown in the figure below (0-60°). (a) Analyze the forces on the object, find the tension force in the bottom string. The magnitude of the tension on the bottom string: T3 = N. (b) Analyze the forces exerted on the junction of the three strings, and calculate the tension forces in the left, and right strings. The magnitude of the tension on the left string: T1 = N. N. The magnitude of the tension on the right string: T2 =

The 100kg object is held by three strings as shown in the figure below (0-60°). (a) Analyze the forces on the object, find the tension force in the bottom string. The magnitude of the tension on the bottom string: T3 = N. (b) Analyze the forces exerted on the junction of the three strings, and calculate the tension forces in the left, and right strings. The magnitude of the tension on the left string: T1 = N. N. The magnitude of the tension on the right string: T2 =

Name: The 100kg object is held by three strings as shown in the figure belo
Uploaded: 2024-03-20T06:56:46.000Z
Channel: Bartleby
Description: The 100kg object is held by three strings as shown in the figure below (0-60°).(a) Analyze the forces on the object, find the tension force in the bottom string.N.The magnitude of the tension on the bottom string: T3 =(b) Analyze the forces exerted

Physics for Scientists and Engineers

10th Edition

ISBN:9781337553278

Author:Raymond A. Serway, John W. Jewett

Publisher:Raymond A. Serway, John W. Jewett

Chapter5: The Laws Of Motion

Section: Chapter Questions

Problem 16P: An iron bolt of mass 65.0 g hangs from a string 35.7 cm long. The top end of the string is fixed....

See similar textbooks

Similar questions

A bag of cement with a mass of 100kg hangs in equilibrium from three wires as shown in the figure . Two of the wires make angles θ1=40 and θ2=30 with the horizontal. Assuming the system is in equilibrium, a. What is the magnitude of tension in string 1 b. What is the magnitude of tension in string 2
A bag of cement with a mass of 100kg hangs in equilibrium from three wires as shown in the figure . Two of the wires make angles θ1=40 and θ2=30 with the horizontal. Assuming the system is in equilibrium (I) What is the magnitude of tension in string 1 (II)What is the magnitude of tension in string 2
The figure below shows a bird feeder that weighs 177.7 N. The feeder is supported by a vertical wire, which is in turn tied to two wires, each of which is attached to a horizontal support. The left wire makes a 60° angle with the support, while the right wire makes a 30° angle. What is the tension in each wire (in N)? left wire= ? N right wire= ?N bottom wire= ?N
1. A long, uniform rope with a mass of 0.135 kg per meter lieson the ground. You grab one end of the rope and lift it at theconstant rate of 1.13 m/s. Calculate the upward force you mustexert at the moment when the top end of the rope is 0.525 mabove the ground. Explain and labled the drawing.
Unlike most of the other muscles in our bodies, the masseter muscle in the jaw, as illustrated in the figure, is attached relatively far from the joint, enabling very large forces to be exerted by the back teeth. This is shown in the figure below, where a person is biting down on a bullet placed between the back teeth. (FM= 210 N and rR = 4.1 cm.) (a) Using the information in the figure, calculate the magnitude of the force exerted by the teeth on the bullet. (b) Calculate magnitude of the force on the joint.
1. Balance the load P1 on the moving pulley and P2 on the inclined plane as shown in the figure. Since P1 / P2 = 1/2, how many P1 does the moving pulley weigh? (Frictions will be neglected.)A) 1/2B) 1C) 2/3D) 3/4E) 1/3
What is the force exerted by the string on the wall at point A in the figure if the suspended fish has mass m = 0.55 kg?
A gymnast of mass 53.0 kgkg hangs from a vertical rope attached to the ceiling. You can ignore the weight of the rope and assume that the rope does not stretch. Use the value 9.81m/s29.81m/s2 for the acceleration of gravity. Calculate the tension T in the rope if the gymnast slides down the rope with a downward acceleration of magnitude 0.900 m/s^2. Express your answer in newtons.
A 1.5 kg block is connected by a rope across a 50-cm-diameter, 2.0 kg pulley, as shown. There is no friction in the axle, but there is friction between the rope and the pulley; the rope doesn’t slip. The weight is accelerating upward at 1.2 m/s2. What is the tension in the rope on the right side of the pulley?
A 110 kg scaffold is 5.80 m long. It is hanging with two wires, one from each end. A 420 kg box sits 1.90 m from theleft end. What is the tension in the right hand side wire? (g = 9.8 m/s2) please show the full solution, thank you.
The figure below shows a bird feeder that weighs 158.9 N. The feeder is supported by a vertical cable, which is in turn tied to two cables, each of which is attached to a horizontal post. The left cable makes a 60° angle with the post, while the right cable makes a 30° angle. What is the tension in each cable (in N)? left cable N Right cable N bottom cable N
The two blocks (m =16 kg, M =88 kg) in Fig. are not attached to each other. The coefficient of static friction between the blocks is µs =0.38, but the surface beneath the larger block is frictionless. What is the minimum magnitude of the horizontal force required to keep the smaller block from slipping down the larger block?