The 2014-T6 aluminum rod AC is reinforced with thefirmly bonded A992 steel tube BC. (Figure 1) Whenno load is applied to the assembly, the gap betweenend C and the rigid support is 0.5 mm.Part ADetermine the support reaction at C when an axial force of P= 395 kN is applied.Express your answer to three significant figures and include appropriate units.HAFc =ValueUnitsSubmitRequest AnswerFigure1 of 1Part BDDetermine the support reaction at D when an axial force of P = 395 kN is applied.400 mmExpress your answer to three significant figures and include appropriate units.B?A 992 steel800 mm50 mmFp =ValueUnitsa a25 mm 2014-T6aluminum alloySection a-aSubmitRequest Answer

Answered: Image /qna-images/answer/a5f9d35f-fd94-496b-b1d4-a023f5ba0f5c.jpg

The 2014-T6 aluminum rod AC is reinforced with the firmly bonded A992 steel tube BC. (Figure 1) When no load is applied to the assembly, the gap between end C and the rigid support is 0.5 mm. Part A Determine the support reaction at C when an axial force of P = 395 kN is applied.

The 2014-T6 aluminum rod AC is reinforced with the firmly bonded A992 steel tube BC. (Figure 1) When no load is applied to the assembly, the gap between end C and the rigid support is 0.5 mm. Part A Determine the support reaction at C when an axial force of P = 395 kN is applied.

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter11: Columns

Section: Chapter Questions

Problem 11.9.14P: The steel columns used in a college recreation center are 16.75 m long and arc formed by welding...

See similar textbooks

Related questions

Q: A composite bar as shown in Fig 3 is firmly attached to unyielding supports at the ends and is…

Q: ソーH 12 ft

A: As per given question Length of column=12 ft Stress=50 ksi We have to determine the largest axial…

Q: A 27- ft-long column is made of aluminum alloy 2014-T6. A. 5.25 in. *0,5 in. -x 10 in. *0.5 in. *…

Q: The structural steel column is fixed at its base and free at its upper end. Assume L = 13.0 ft, a =…

A: Slenderness Ratio = effective lengthleast radius of gyration for a column fixed at bottom and free…

Q: Required information Two solid steel shafts (G= 77.2 GPa) are connected to a coupling disk B and to…

Q: Problem No. 2: Compute the increase in stress for each element if the temperature increases by 100°F…

A: As per given question We have to find determine increse the strss of each segment

Q: using Euler's formula. Assume E = 200 GN/m? and factor of safety 3. Example 16.1. A solid round bar…

A: Condition is one end is fixed and the other end is hinged Data Given Diameter of the solid round…

Q: A W200×46 A-36 steel member shown in Figure Q3 is to be used as a pin- connected column. Given that…

A: Yield stress = 250 Mpa E = 200 Gpa

Q: The structural steel column is fixed at its base and free at its upper end. Assume L = 13.0 ft, a =…

A: Given:

Q: The structural steel column is fixed at its base and free at its upper end. Assume L- 13.0 ft, a =…

A: Area Moment of Inertia (MOI) is defined as second moment of area or it is a property of a cross…

Q: Determine the maximum load P that the frame can withstand without bending

Q: Required information Members AB and BE of the truss shown consist of 25-mm-diameter steel rods (E=…

A: Diameter (d)=25 mmA=π4×252=490.873 mm2E=200 GPaP=69 kNNow, let us assume the angle between truss DE…

Q: The solid steel beam has a square cross sectional profile and supports a load of 65.5 kN. The steel…

Q: The 10-ft-long bar is made of aluminum alloy 2014-T6. If it is fixed at its bottom and pinned at the…

A: Given that,

Q: 8. Select the lightest W shape that will act as a column 12 m long with fixed ends and support an…

A: To find : select the lightest shape that will act column. Given : axial loadP=700 KN proportional…

Q: (c) A solid round bar 60mm in diameter and 2.5m long is used as a strut. One end of the strut is…

Q: Problem 4.54 I Review Part A The 2014-T6 aluminum rod AC is reinforced with the firmly bonded A992…

Q: The W8 x 15 wide-flange A-36 steel column is assumed to be fixed at its top and bottom (Figure 1).…

A: Write the properties of the W8 X 15 flange. Write the values of the properties of A-36 steel.

Q: Determine the support reaction at C when an axial force of P = 435 kN is applied. The 2014-T6…

A: Find the reaction at C and D.

Q: A 1.5m long composite rod consist of a square cast-iron bar centre of 65mm cross section, reinforced…

Q: 1. A vertical column with pinned ends is subjected to an end load P. The column has a radius of…

Q: The structural steel column is fixed at its base and free at its upper end. Assume L = 13.0 ft, a =…

Q: 1. A vertical column with pinned ends is subjected to an end load P. The column has a radius of…

A: Area, A = 0.02 m2 E = 200 GPa Length, L =6 m Find Load, P Stress…

Q: For a rod made of aluminum alloy 2014-T6, select the smallest square cross section that can be used…

A: Given, P = 55 kips = 55 ✕ 1000 psi Length = 20 in The given column is hinged at both ends. So the…

Q: A steel pipe having the cross section shown is used as a column. Use oy= 250 MPa, t= 6.3 mm, FOS =…

Q: section. If AB is made up of aluminum and CD of steel, determine the required diameter of each…

Q: A gazebo is planned to be constructed in a community park as an additional shelter for visitors from…

A: Solution: Given Data: A=7200 mm2SR=0.026E=200 GPaσy=233 MPaFOS=1.67K=0.7 (for Fixed-pinned end)

Q: A 7.2 m long A-36 steel tube having the cross section shown in Fig. is to be used as a pin- nded…

A: Given Length, L = 7.2 m Diameter, D = 75 mm d = 70 mm

Q: A W14 x 38 column of A992 steel is fixed at its base and pinned at its top. (a) If L = 22 ft,…

Q: )Determine the critical load for its stability if Both ends are fixed. b) For these systems…

A: Given that, Length of beam, L=14 m,Type of material is ANSI1020,Type of material W12×87 For ANSI…

Q: A composite section will be used to support a heavy axial load of P = 800 kN with a rigid plate at…

Q: Assume that the wood column is pinned top and bottom for movement about the x-y axis, and ixed at…

A: Given Data Area of the cross-sectional of the beam, A=4(10)=40in2 Young Modulus, Ew = 1.8×103 ksi,…

Q: The rectangular steel bar shown, has a total length of 50", a thickness of 1" and a width of 2" and…

Q: A load P is supported by a structure consisting of rigid bar ABC, two identical solid aluminum alloy…

Q: The tapered member is fixed connected at its ends A and B and is subjected to a load P = 10 kips at…

A: We need to calculate reactions at the supports.

Q: If the cross-sectional area of bar AB is 2.4 in? and BC is 5.0 in², determine the largest force P…

A: Given DataAAB=2.4in2ABC=5 in2 Free Body Diagram

Q: 70 mm Fig. P10.115 A steel column of 7.2-m effective length is to support an 83-kN eccentric load P…

Q: Determine the critical buckling stress for a 25' long W12 x 65 steel column. Assume simple pin…

Q: 943. The tapered member is fixed connected at its ends A and B and is subjected to a load P = 35 kN…

A: Given Data Load acting at the center is: P=35 kN=35000 N The value of x is: x=750 mm=0.75 m The…

Q: A wide flange A60 steel column has a length of 4.5meters and pinned ends. If Sx=898x103 mm3,…

A: Calculate the moment of inertia along x, y direction Ix = Sx*(d/2) = 898*103*(358/2) =1.6* 108 mm4…

Q: 2. A core made of stainless steel (material 1, E, = 28 Msi) is fully bonded to an inner shell of…

Q: Using the aluminum alloy 2014-T6, determine the largest allowable length of the aluminum bar AB for…

A: Given: The column with the load is shown below: The loads are: (a) 150 kN, (b) 90 kN, (c) 25 kN

Q: A 60° В |C - 2.7 m The strut is supported by a pin at C and an A-36 steel (Young's Modulus is 200…

Q: An aluminium rod is fixed at its base and free at the top as shown in Figure 1. If the imposed…

A: given; load(P)=200KN =200*103Ndiameter(d)=200mmelasticity(E)=72GPa…

Q: c) The rigid beam rests in the horizontal position on two 2014-T6 aluminum cylinders having the…

Q: The structural steel column is fixed at its base and free at its upper end. Assume L= 13.0 ft, a =…

A: Given: The modulus of elasticity, E = 29000 ksi The yield strength = 50 ksi The load acting, P = 18…

Question

The 2014-T6 aluminum rod AC is reinforced with the
firmly bonded A992 steel tube BC. (Figure 1) When
no load is applied to the assembly, the gap between
end C and the rigid support is 0.5 mm.
Part A
Determine the support reaction at C when an axial force of P= 395 kN is applied.
Express your answer to three significant figures and include appropriate units.
HA
Fc =
Value
Units
Submit
Request Answer
Figure
1 of 1
Part B
D
Determine the support reaction at D when an axial force of P = 395 kN is applied.
400 mm
Express your answer to three significant figures and include appropriate units.
B
?
A 992 steel
800 mm
50 mm
Fp =
Value
Units
a a
25 mm 2014-T6aluminum alloy
Section a-a
Submit
Request Answer

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step 3

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 3 steps with 3 images

SEE SOLUTION Check out a sample Q&A here

Similar questions

Determine if the following column is long or short, and then determine the critical load on a steel column having a rectangular cross-section, 12mm by 18mm and length of 250 mm. it is fixed on both ends and made from a steel that has the following properties: E=209 Gpa and Sy=290 Mpa. What is the Slenderness ratio, The Cc, The long or short column, The critical load.
A circular-cross-section bar with a diameter of 50mm and a length of 1.25 m is axially loaded. The baris made of medium-carbon steel. Both ends are pinned.Determine(a) Whether the Johnson or the Euler formula shouldbe used.(b) The critical load.
The 2014-T6 aluminum rod AC is reinforced with the firmly bonded A992 steel tube BC. When no load is applied to the assembly, the gap between end C and the rigid support is 0.5 mm. Determine the support reactions when the axial force of 400 kN is applied.
A 20-ft-long column is made of aluminum alloy 2014-T6. If it is pinned at its top and bottom, and a compressive load P is applied at point A, determine the maximum allowable magnitude of P using the equations of Sec. 13.6 and the interaction formula with (sb)allow = 20 ksi.
Question no 1: a)Determine the critical load for its stability if Both ends are fixed.b) For these systems determine the developed stress (It is pin supported, bottom is fixed and the top is pinned;The system is fixed on the bottom ,Both ends are fixed.) The length LB is 14m and material is ANSI1020 where beam is W12 X 87.
A bar having a length of 30 in. is used to support an axial compressive loadof 12 kip, Fig. It is pin supported at its ends and made of a 2014-T6 aluminum alloy. Determine the dimensions of its cross-sectional area if its width is to be twice its thickness.
2. A steel I section column is 3.5m long with one end hinged and theother fixed.(a) Determine Euler’s critical load for the column. (b) If the section is strengthened by a cover plate (300mm x 8mm) ateach flange of the I Section, determine the new Euler’s bucklingload. For (a), Area = 7485mm2, Ixx = 1.2545x108mm4, Iyy = 2.1936x107mm4,E= 2x105 N/mm2
The column in Fig. is made of aluminum alloy 2014-T6 and is used tosupport an eccentric load P. Determine the maximum allowable value of Pthat can be supported if the column is fixed at its base and free at its top.
The load is supported by the four stainless steels wires that are connected to the rigid members AB and DC. The members were originally horizontal, and each wire has a cross-sectional area of 16mm2. Given that E= 200Gpa for all the steel wires. a) Draw Freee Body Diagram(FBD) of each rigid member. b) Determine the angle of tilt of each member after the 2250N load is applied
Select the lightest W shape that will act as a column of 7 m long with both end hinged and support an axial load of12KN with the safety factor of 2.2, assume the proportional limit for steel is 200 Mpa and E=208 Gpa
Three steel rods (E = 200 GPa) supports a 50 kN load P. Each of the rods AB and CD has a 300 mm2 cross-sectional area and rod EF has a 600 mm2 cross-sectional area.State whether the structure is statically determinate or indeterminate. Why?Determine the force and the stress in each rod.Determine the deformation of each rod. Note: The link BED is rigid, and BE = ED.
The tube is 0.25 in. thick, is made of a 2014-T6 aluminum alloy, and is ixed at its bottom and pinned at its top. Determine the largest axial load that it can support.