The amusement ride weighs 20 kip and has a radius of gyration of kp = 37ft, and is initially at rest. A person weighing 170 lb sits in one of the chairs at A and a moment of 85 kip-ft is applied about point P. Determine the angular velocity after the wheel has rotated 180 degrees and the person is at point B. The weight of the chairs can be neglected and they swivel such that the person remains upright throughout the ride. The radius of the ride TPA = 55 feet. Given: 1 kip = 1000 lb. Angular velocity, w= A in rad/s

The amusement ride weighs 20 kip and has a radius of gyration of kp = 37ft, and is initially at rest. A person weighing 170 lb sits in one of the chairs at A and a moment of 85 kip-ft is applied about point P. Determine the angular velocity after the wheel has rotated 180 degrees and the person is at point B. The weight of the chairs can be neglected and they swivel such that the person remains upright throughout the ride. The radius of the ride TPA = 55 feet. Given: 1 kip = 1000 lb. Angular velocity, w= A in rad/s

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The 31-kg reel is mounted on the 16-kg cart. Part A: If the cable wrapped around the inner hub of the reel is subjected to a force of P=50N, determine the velocity of the cart when t = 4.2 s. The radius of gyration of the reel about its center of mass O is kO=250mm. Neglect the size of the small wheels. Part B: Determine the angular velocity of the reel when t = 4.2 s.
The spool has a mass of 20 kg and a radius of gyration of kO = 160 mm If the 15-kg block A is released from rest, determine the velocity of the block when it descends 850 mm .
The rod AB has a mass of 20 kg，the mass of the piston A and B are both 5kg. Piston B is attached to a spring of constant k = 1200 N/m. The spring is un-stretched when θ = 0. If the rod is released from rest whenθ = 45° Please find÷ (1) the moment inertia of the rod AB about its mass center G (2)The angular velocity of rod AB at θ = 0° (3）the velocity of piston A at θ = 0° (4) the velocity of Piston B at θ = 0° (hint: regard the piston A, B, rod as a system, during the motion, except the spring, the weight of rod AB, the weight of pistonB also does work). g = 9.8 m/s2
The 153-kg wheel has a radius of gyration about its center of mass O of kO = 283 mm. If it rotates counterclockwise at an angular speed of 1431 rev/min and the tension force applied to the braking band at A is TA = 1771N,a) Determine the angular acceleration, in rad/s2, so that the wheel comes to rest in 67.6 revolutions after TA and TB are applied.
The spool has a mass of 200 kg and a radius of gyration of kG = 0.2 m. If the coefficients of static and kinetic friction at A are μs = 0.3 and μk = 0.2, respectively, determine the angularacceleration of the spool if P = 400 N.
The uniform thin pole has a weight of 50 N and a length of 26m. If it is placed against the rough wall and on the rough box in the position d = 10 m, µs = 0.3 at points A, B and C P= 150 NBox weight = 100 N Determine the distance x when the motion of the pole impend
The 10-kg uniform slender rod is suspended at rest when the force of F = 150 N is applied to its end. Determine the angular velocity of the rod when it has rotated 180° clockwise from the position shown. The force is always perpendicular to the rod.
The shown spool has a mass of 450 kg and aradius of gyration Gk=1.2 m. It rests on thesurface of conveyer belt for which the coefficient offriction m= 0.5. If the conveyer acceleratesat2 1.2m / S and the spools rolls without slipping,determine the tension in the wire and the angularacceleration of the spool
The 3.8 kg block is descending at a rate of 1.2 m/s when the hydraulic cylinder BC exerts a force F=500 N on the brake arm. Determine the number of radians the wheel will rotate before the system comes to rest. The wheel has a mass of 25 kg and a radius of gyration about its center kO=300 mm. The coefficient of kinetic friction between the brake arm and the wheel is 0.25.
The 30-kg turbine disk has a centroidal radius of gyration of 175 mm and is rotating clockwise at a constant rate of 60 rpm when a small blade of weight 0.5 N at point A becomes loose and is thrown off. Neglecting friction, determine the change in the angular velocity of the turbine disk after it has rotated through (a ) 90°, (b ) 270°.
The belt around the pulley, which weighs 60 lb and has a radius of gyration of 10”, has tensions applied to it on either side, as shown, for 8 seconds after the block has been dropped from rest. Determine the angular velocity of the pulley. Why does the block not have any influence on the solution?
The 20 kg roll of paper has a radius of gyration kA = 85 mm about an axis passing through pointA. It is pin supported at both ends by two brackets AB. If the roll rests against a wall for which thecoefficient of kinetic friction is μk = 0.25 and a vertical force F = 30 N is applied to the end of thepaper, determine the angular acceleration of the roll as the paper unrolls.