The double pulley shown has a mass of 15 kg and a centroidal radius of gyration of 160 mm. Cylinder A and block Bare attached to cords that are wrapped on the pulleys as shown in the figure. The coefficient of kinetic friction between block Band the surface is 0.2. Consider that the system is at rest in the position shown when a constant force P= 220 N is applied to cylinder A. 150 mm 250 mm 30° B 5 kg 15 kg 1 m Determine the velocity of cylinder A as it strikes the ground. (You must provide an answer before moving on to the next part.) The velocity of cylinder A as it strikes the ground is 5.03 m/s

The double pulley shown has a mass of 15 kg and a centroidal radius of gyration of 160 mm. Cylinder A and block Bare attached to cords that are wrapped on the pulleys as shown in the figure. The coefficient of kinetic friction between block Band the surface is 0.2. Consider that the system is at rest in the position shown when a constant force P= 220 N is applied to cylinder A. 150 mm 250 mm 30° B 5 kg 15 kg 1 m Determine the velocity of cylinder A as it strikes the ground. (You must provide an answer before moving on to the next part.) The velocity of cylinder A as it strikes the ground is 5.03 m/s

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The 10 kg slender bar AB, shown in the figure, has a length of 2 m. A blockof negligible mass, pinned freely to end A, is confined to move along the smooth circular groove with its centre at O. End B rests on the floor for which the coefficient of kinetic friction, µk = 0.4. If the bar is released from rest when θ = 30 degreesa) identify the type of ensuing motion of the bar,b) draw the free body, kinematic and kinetic diagrams for the bar, c) set up a global reference axes system, and write down the relevantkinetic and kinematic relationships with respect to reference axes system, andd) determine the angular acceleration of the bar and the reaction forces at ends A and B.
A uniform slender bar AB with a mass of 20 kg and length of 3.6 m leans on a wall as shown. It is attached to a weightless small roller at end A on a smooth horizontal surface. The coefficient kinetic friction between end B and the wall is 0.25. If the bar is released from rest in the position shown when θ is 30°. Then find, determine the normal force at A. determine the normal force at B. determine the frictional force between end B and the wall.
Consider the system of two blocks. Thereis no friction between block A and the tabletop. The mass of block B is5.00 kg. The pulley rotates about a frictionless axle, and the light ropedoesn’t slip on the pulley surface. The pulley has radius 0.200 m andmoment of inertia 1.30 kg . m2. If the pulley is rotating with an angularspeed of 8.00 rad/s after the block has descended 1.20 m, what is themass of block A?
The 10 kg slender bar AB, shown in the figure, has a length of 2 m. A blockof negligible mass, pinned freely to end A, is confined to move along the smooth circular groove with its centre at O. End B rests on the floor for which the coefficient of kinetic friction, µk = 0.4. If the bar is released from rest when θ = 30 degrees a) draw the free body, kinematic and kinetic diagrams for the bar, b) set up a global reference axes system, and write down the relevantkinetic and kinematic relationships with respect to reference axes system, c) determine the angular acceleration of the bar and the reaction forces at ends A and B. *****MASS IS 10KGS NOT 10LBS*****
The slender, uniform bar BC with a mass of 6 kg rests on the center of the 300x200 mm block of mass 3 kg. The friction coefficients at the contact points are: μA = 0.4; µB = 0.6; µC = 0 . Determine the greatest moment M that can be applied to the bar without generating movement in it.
A load of mass 230 kg is lifted by means of a rope which is wound several times round a drum and which then supports a balance mass of 140 kg. As the load rises, the balance mass falls. The drum has a diameter of 1.2 m and a radius of gyration of 530 mm and its mass is 70 kg. The frictional resistance to the movement of the load is 110 N. and that to the movement of the balance mass 90 N. The frictional torque on the drum shaft is 80 N-m. 2. Find the torque required on the drum, and also the power required, at the instant when the load has an upward velocity of 2.5 m/s and an upward acceleration of 1.2 m/s?. [Ans. 916.2 N-m ; 4.32 kW]
The solid homogeneous cylinder shown has a mass of 30 kg and is rotating at 1200 rpm clockwise about a fixed horizontal axis through O. The coefficient of kinetic friction between the brake and the cylinder is 0.20. If the tension in the spring when the brake is applied is 100 N, determine the time required for the cylinder to stop rotating. Neglect the thickness of the vertical members. (Draw FBD)
Hey, please reply as soon as POSIBLE! Wheel A, of 30kg, is located in the position shown by the effect of idler wheel D (frictionless wheel) and the system rope-spring BC. The static coefficient of friction is 0.50 and the kinetic coefficient is 0.40 between all the contact surfaces. If the force exerted by the horizontal spring is 60 N: a) Determine whether or not wheel A is turning when a moment M of 60 Nm is applied at point G. b) If it is shown that under the previous condition the wheel is turning, calculate the new value of the moment M necessary for the wheel to keep turning in equilibrium. Also indicate the frictional force that is generated at point F under that condition.
The 13-kg sphere C is released from rest when θ = 0∘ and the tension in the spring is F = 100 N. The figure shows rod AB hinged at point A. Sphere C is attached to the other end of the rod, labeled as B. Point D is located on the rod, 0.3 meters from point A and 0.15 meters from the center of the sphere. A spring with stiffness k of 500 newtons per meter is attached to the rod at point D by one of its ends. Another end of the spring is fixed at point E, located 0.4 directly above point A. The sphere is shown to be below and to the right of point A. An acute angle between the rod and the horizontal is labeled as theta. Determine the speed of the sphere at the instant θ = 90∘ . Neglect the mass of rod AB and the size of the sphere.
In a porter governor the mass of the central load is 18 kgand the mass of each ball is 2kg. the top arms (254) mm while the bottom arms are (304) mm long. The friction of the sleeve is 20 N. If the top arms make 45 deg with the axis of rotation in the equilibrium position, find the range of the speed of the governor in that position
Please answer: 3, 4, 5, 6, 8, 9, 10, 12 The wheel is attached to the spring. The mass of the wheel is m=20 kg. The radius of the wheel is 0.6m. The radius of gyration kG=0.4 m. The spring’s unstretched length is L0=1.0 m. The stiffness coefficient of the spring is k=2.0 N/m. The wheel is released from rest at the state 1 when the angle between the spring and the vertical direction is θ=30°. The wheel rolls without slipping and passes the position at the state 2 when the angle is θ=0°. The spring’s length at the state 2 is L2=4 m. (1) If the datum for gravitational potential energy is set as shown below, the the gravitational potential energy of the wheel at the state 1 is 0 N m(two decimal places) (ANSWER IS 0) (2) If the datum for gravitional potential energ is set as shown below, the gravitational potential energy of the wheel at the state 2 is 0 N m (two decimal places) (ANSWER IS 0) (3) At state 1, how long the spring is stretched from its unstretched state (length…
a trolley of mass m stands on frictionless rails.a rod of mass m and length l is pivoted to the roof of trolley on a frictionless hinge and the and rod is gently left from the horizontal postion as shown in the figure. initialy the whole system was at rest when the rod becomes vertical for the first time.net vertical force offered by the track to the carriage is 16/x mg. find x.