The efficiencies of aircraft can be very important indicators for meeting emission standards. Often thermal efficiency needs to be estimated indirectly instead of conducting combustion tests. A business jet is conducting testing at Mach 0.70 at sea level using the Jet A1 fuel (LCV=43.15 MJ/kg) at a specific fuel consumption of 0.06 kg/(Nh). The propulsive jet velocity is about 340 m/s. The local ambient air temperature is 288 K. Calculate the thermal efficiency of the engine. Hand written plzz

The efficiencies of aircraft can be very important indicators for meeting emission standards. Often thermal efficiency needs to be estimated indirectly instead of conducting combustion tests. A business jet is conducting testing at Mach 0.70 at sea level using the Jet A1 fuel (LCV=43.15 MJ/kg) at a specific fuel consumption of 0.06 kg/(Nh). The propulsive jet velocity is about 340 m/s. The local ambient air temperature is 288 K. Calculate the thermal efficiency of the engine. Hand written plzz

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Air passes through a narrow section during horizontal flow. The initial air temperature is 21 [℃], flow rate 91.5 [m / s], pressure 10.56 [Kg / cm2 abs], later flow rate 152 [m/s], pressure 7.05 [Kg/cm2. abs], what is the temperature of the air at the outlet if there is no outside or heat coming in? The average specific heat of air is 7 [kcal / kg mol. ℃] and calculate as an ideal gas.
With a flow rate of 50 kmol/hour, air is compressed from P 1 = 1.2 bar pressure to P 2 = 6 bar pressure. The power required for this process is 98.8 kW. Temperature and speed data are given below. T1 = 300 K ,T 2 = 520 K ,v1 = 10 m/s, v2 = 3.5 m/s What is the heat rate transferred to the compressor (kJ/s)? Assume that air has Cp = (7/2)R and enthalpy is independent of pressure. (Gpt/Ai wrong ans not allowed)
The speed of a supersonic aircraft flying at an altitude of 1,100 meters corresponds to a Mach number of 2.5. Estimate the time elapsed, in seconds, between the instant the aircraft was directly over head of an observer and the instant the observer feels the disturbance due to the aircraft. Presume that the temperature at the given height is 280°K, with k = 1.4 and R = 2.87 J/kg·K, in determining the questions of the following three cases: A) When the observer is stationaryB) When the observer is moving in the direction of the aircraft at M = 0.5C) When the observer is moving in the opposite direction with M = 0.5.
a random sample of 83 reconstructed clay vessels from the turquoise ridge Thermo Dynamics How much entropy, in kJ/K, is transferred to 20 kg of helium at 20 degrees C if the temperature is increased by 28 degrees C. Note: the pressure is maintained constant. Please solve within 30 minutes.
A 5-feet diameter Chimney is designed to handle a flue gas produced in a steam power plant at a rate of 17 lb/s. The barometric pressure is 29.92-inch Hg. Outside air enters the combustion chamber at 90 F. The average temperature of the flue gas inside the Chimney is 572 F and its molecular weight is 30. Cv = 0.35, Rair = 53.342 ft-lb/lb-R. Calculate: a. The total draft, feet of air. b. The height of the Chimney, feet
A 5-feet diameter Chimney is designed to handle a flue gas produced in a steam power plant at a rate of 17 lb/s. The barometric pressure is 29.92-inch Hg. Outside air enters the combustion chamber at 90 F. The average temperature of the flue gas inside the Chimney is 572 F and its molecular weight is 30. Cv = 0.35, Rair = 53.342 ft-lb/lb-R. Calculate: 5. The total draft, feet of air. 6. The height of the Chimney, feet
Look up the word affinity in a dictionary. Why do you suppose some engineers refer to the turbomachinery scaling laws as affinity laws?
Carbon dioxide (k=1.289; Cp=0.846 kj/kgK; R=0.1889 kj/kgk) enters a convergent-divergent nozzle at 65 m/s, 350 oC and 300 kPa and leaves the nozzle in a supersonicleaves at speed. What is the pressure of carbon dioxide in the neck of the nozzle?
Air (diatomic, MW = 28.8664 g/mol) at 1.7 atm gage (where Pam = 1 atm) and 15°C enters a 70-m long horizontal 75-mm-ID steel pipe (€ = 4.6(10) m). The velocity at the entrance of the pipe is 60 m/s. Assuming isothermal flow, what is the absolute pressure (atm) at the discharge end of the line? Use Churchill equation for the friction factor.
3. Assume the turbine as an incompressible flow machine. The average meridional speed is given as 150m/s. The flow coefficient is 0.5. Determine the blade speed that satisfies the above conditions.4. In a two-dimensional compressor cascade, inlet stagnation air pressure is 1.5 bar and inlet stagnation temperature is 330K. For an inlet Mach number of 0.75 and an inlet flow angle of 500, the exit flow angle is measured as 15.80. Determine the mass flow rate per unit frontal area, the exit Mach number and the static pressure ratio across the cascade. Assume the flow is isentropic.
What is the pressure ratio of the High-Pressure turbine operating at cruise? Given data: Mach number = 0.8 Altitude = 40000 ft High pressure Compressor ratio = 18 booster pressure ratio = 1.66 Fan Pressure Ratio = 1.5 Cp = 1244J/kgK polytropic efficiency =0.9 ? = 1.3
Air (? = 1.225 kg/m3 and ? = 1.789 × 10−5 kg/m⋅s) flows in a wind tunnel, and the wind tunnel speed is measured with a Pitot-static probe. For a certain run, the stagnation pressure is measured to be 560.4 Pa gage and the static pressure is 12.7 Pa gage. Calculate the wind-tunnel speed.