The modulus of rigidity of a material is 63KN/mm2. A rod of diameter 40mm is subjected to an axial tensile force of 25kN and the change in its diameter is observed to be 0.002mm. Calculate v, E and K for the material

The modulus of rigidity of a material is 63KN/mm2. A rod of diameter 40mm is subjected to an axial tensile force of 25kN and the change in its diameter is observed to be 0.002mm. Calculate v, E and K for the material

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter2: Axially Loaded Members

Section: Chapter Questions

Problem 2.5.1P: The rails of a railroad track are welded together at their ends (to form continuous rails and thus...

See similar textbooks

Related questions

Q: An aluminum alloy has a modulus of elasticity of 70 kN/mm^2 and yield strength of 275 N/mm^2…

Q: steel band 8mm thick is to be pulled on to a cylinder 30cm in diameter . The internal diameter of…

Q: A column has a rectangular cross-section of 10 mm x 20 mm and a length of 1 m The slenderness ratio…

A: Length of the column, L=1 mArea of column, A=10×20×10-6 m2

Q: A 37.5-mm-diameter rod 6 m long elongates 12 mm under a load 236 KN. The diameter of the rod…

Q: A circular solid piece of rock is tested in a compression testing rig to examine its stress/strain…

A: Sample diameter, d=6 inchesSample original length, L=12 inchesCompression load, P=10000 lbfReduction…

Q: A force of 20,000 N will cause a 1 cm ×1cm bar of magnesium to stretch from cm to 10.045…

A: Given Force, F = 20,000 N Area, A = (1 x 1) x 10-4 m2 Find The modulus of elasticity (E) both…

Q: A cylindrical specimen of some metal alloy 9.0 mm (0.3543 in.) in diameter is stressed elastically…

A: The normal stress in the specimen can be determined as,

Q: Calculate the extension of the bar (△L).

A: Calculate the extension of the bar (△L)

Q: Determine the instantaneous stress and elongation of a 30 mm diameter bar if a mass of 60 kg falls…

A: This the case of impact load so impact stress is given as σ=PA1+1+2EAhPL P=mg=60*10=600 N…

Q: 4. Calculate the Youngs modulus for the materialL of the bar shown below, The bar has an initial…

Q: 100 mm x 100 mm x 100 mm cube made with glass polymers in the y- direction is subjected to a tensile…

Q: A circular tube is subjected to torsion by torques T applied at the ends. The bar is 0.75 m long and…

A: Given Data: The length of the tube is, l=0.75 m=0.75 m×1000 mmm=750 mm. The inside diameter of the…

Q: A copper rod of diameter 10 mm and length 4 m has a tensile force of 5 kN applied on it . Modulus of…

Q: 1. Consider a cylindrical specimen of some hypothetical metal alloy that has a diameter of 10.0 mm.…

Q: When a brass rod of diameter 2 mm is subjected to a tension of Sx10 N, the diameter changes by…

Q: A steel cable with nominal diameter 25 mm as shown in Table Q2(a) is used in a construction yard to…

Q: A bar of 80 mm diameter is tested in tension. It is observed that when a load of 90 kN is applied,…

A: The given data are: Here, d denotes the diameter, P denotes the load, and L denotes the length.

Q: A thin-walled cylinder of diameter 40 mm is subjected to an internal pressure of 5 N/mm² and a…

Q: The % of error between a theoretical shear modulus of GPa and an experimental modulus of rigidity of…

A: Option d is correct.

Q: Two bolts A and B of same material and length are subjected to identical tensile load. If the…

Q: Define the given terms related to mechanical properties of materials. 1. Percent elongation 2.…

A: Let us define the following mechanical terms 1.Percent elongation 2. Percent reduction in area 3.…

Q: You are given a square rod of 6061-T6 aluminum (cross-section = 4mm X 4mm, length = 2.3m). The…

Q: Calculate the amount of elongation in cm when a mass of 1000 g is suspended on the tip of the spring…

A: Given:- Mass (m) = 1000g = 1 kg Spring constant (k) = 700 N/m Acceleration due to gravity (g) =…

Q: A circular, metal rod of diameter 1 cm is loaded in tension. When the tensile load is 5kN, the…

Q: Consider a cylindrical nickel wire 2.3 mm in diameter and 3.4 × 10^4 mm long. Calculate its…

A: Given Length = L = 34000 mm Load = F = 320 N Young's Modulus = E = 207 GPa Diameter = D = 2.3 mm…

Q: 3. Find the equivalent stiffness as shown below. Draw the free body diagram. x10 Nm sx10' N 45 10 Nm

Q: Consider a cylindrical nickel wire 1.6 mm in diameter and 3.5 × 104 mm long. Calculate its…

Q: A rope 3.5 mm² breaks when a load of 50 kN is applied to it. Estimate the diameter of the same rope…

Q: Two helical springs A and B with ground ends are made of the same material and are in parallel. The…

Q: (1) Find the factor of safety allowed in a piston rod 200 mm diameter if the maximum tensile pull in…

A: Given data: d=200 mmF=1 MNσS=600 MPa Need to determine the factor of safety allowed in a piston rod.

Q: A copper specimen subjected to the Brinell Hardness Test using hardened steel ball indenter of…

A: Write the value of the Brinell hardness number. BHN=807 Write the diameter of the ball indenter.…

Q: Two threaded bolts A and B of same material and length are subjected to identical tensile load If…

A: Given:Equal tensile load,P1=P2=P,L=L1=L2dA=12 mmUA=strain energy in bolt A,UB=strain energy in bolt…

Q: The ratio of modulus of rigidity to bulk modulus for a Poisson's ratio of 0.25 would be: (а) 2/3 (с)…

A: Given, Poisson's ratio = μ = 0.25 From the relation between Young's modulus and Modulus of…

Q: A rod is subjected to a uniaxial load within linear elastic limit. When the change in the stress is…

A: Given data: The change in stress, σ=200 MPa. The change in strain, ε=0.001. The Poisson's ratio,…

Q: Calculate the modulus E and the shear modulus G

Q: A spherical pressure vessel 400-mm in diameter has a uniform thickness of 6 mm. The vessel contain…

A: To Find : The Factor of safety with respect to tensile failure . Given : The diameter is D=400 mm.…

Q: A steel bar of 8 mm is heated from 10° C to 25° C and the bar is free to expand. The bar will induce…

A: When a bar is heated, it has a tendency to expand. If it is somehow constrained to expand, there…

Q: A bar is subjected to fluctuating tensile load from 20 kN to 100 kN .The material has yield strength…

A: Given: The fluctuating tensile load in a bar,P1=20 kNP2=100 kNσyt=240 MPaσe=160 MPaFactor of safety,…

Q: A mass of 45 kg falls freely from a height of 2,5 m onto a collar fixed to the bottom end of a…

Q: The power required by a plane flying at 545 kPH is 1800 kW. Determine the average resisting force in…

Q: A rubber block with dimensions of 120x120x120 mm is compressed in a rigid mold cavity with a…

Q: A cylinder head of a steam engine is held on by 14bolts. The effective diameter of the cylinder is…

Q: Consider a cylindrical specimen of a steel alloy with 8.5 mm diameter and 80 mm long that is pulled…

A: Calculate Modulus of Elasticity in MPa and psi Modulus of Resilience in MPa and psi

Q: Calculate the strain energy stored in a bar 2.5m long, 55 mm wide and 45 mm thick when it is…

Q: A metal wire is 1 mm diameter and 1 meter long. It is stretched by a force of 2N. Calculate the…

A: Given data d=1mm L= 1 m = 1000 mm F= 2 N V= 0.3 E= 90 GPa. So

Q: 2) A bar of length 5 m is subjected to an axial tensile load of 100 KN. The bar is 25 mm diameter…

A: According to the given information we have a bar of 5 m to an axial load of 100 Kn the bar is 25 mm…

Concept explainers

Thermal Properties of Materials

In mechanical engineering, the thermal property is represented as the physical quantity that is relevant to the application of heat. The thermal properties are evaluated by variations in any specific material due to low heat or high heat. The quantities that influence the thermal property of the materials are mass, density, temperature, and many others.

Question

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

Step 2

Step 3

Step 4

Step by step

Solved in 4 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Types of Properties of Engineering Materials

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

The rails of a railroad track are welded together at their ends (to form continuous rails and thus eliminate the clacking sound of the wheels) when the temperature is 60°F. What compressive stress ?? =6.5×10-6 /? is produced in the rails when they are heated by the sun to 120"F if the coefficient of thermal expansion a = the modulus of elasticity E = 30 × 106 psi?
Two bolts A and B of same material and length are subjected to identical tensile load. If the elastic strain energy stored in bolt A is 16 times that of the bolt B and the mean diameter of bolt A is 13 mm, the mean diameter of bolt B (in mm) is
Calculate the amount of elongation in cm when a mass of 1000 g is suspended on the tip of the spring with a spring constant of 700 N/m.
Two threaded bolts A and B of same material and length are subjected to identical tensile load If the elastic energy stored in bolt A is 4 times that of the bolt B and the mean diameter of bolt A is 12 mm, the mean diameter of bolt B in mm is.....
A metallic rod of 500 mm length and 50 mm diameter, when subjected to a tensile force of 100 kN at the ends, experiences an increase in its length by 0.5 mm and a reduction in its diameter by 0.015 mm. Calculate the Poisson's ratio of the rod material .
A metal wire is 1 mm diameter and 1 meter long. It is stretched by a force of 2N. Calculate the change in diameter. E = 90 GPa and ν= 0.3
Experiments were conducted in a tension testing machine to evaluate the material properties of two metallic rods both having diameter equal to 10 mm. First rod having modulus of rigidity of the material equal to 400 tonnes/cm2 when subjected to an axial tensile force of 6 kN, the change in its diameter was observed to be 0.0018 cm. The value for the bulk modulus of the second metallic rod is same as that of the first one but modulus of elasticity 18% more. Based on the material properties calculate and compare the values of different moduli as well as Poisson’s ratio for both metallic rods. Justify your answer with reasons.
Consider a cylindrical specimen of a steel alloy with 8.5 mm diameter and 80 mm long that is pulled in tension. Estimate these mechanical properties using the figure: Modulus of Elasticity in MPa and psi Modulus of Resilience in MPa and psi
9. A compressive force of 15-N is applied to a flexible poly(vinyl chloride) (CAS# 9002-86-2) wire that is 5-m long and has a diameter of 3.6-mm. If the wire contracts by 0.5-mm, calculate the compressive modulus
To support a tensile load of 65 kN, a metallic rod with a cross-sectional area of Circle and a length of 0.32 m will be used. It is desirable that the voltage on the rod does not exceed 240 MPa, and the maximum extension is 0.42 mm. How many [m] should the minimum (minimum) Rod diameter be in these conditions? Calculate. (Take the elasticity module as 220 GPa for the metallic Rod).
A 100 mm x 100 mm x 100 mm cube made with glass polymers in the y- direction is subjected to a tensile load of 100 kN along the y-direction. However, the cube is constrained against deformation in the x and z directions. Given the following properties: Ex = 20 GPa Ey = 50 GPa Ez = 20 GPa vxy = 0.25 vxz = 0.5 vyz = 0.25 (a) Compute for the change in length of the cube in the y-direction and; (b) Determine the stresses, σx, σy, σz
A tensile force of 200 KN is applied on a 0.02-m diameter and.2-m long rod. After applying the load, the diameter of the rod decreases to 0.01998 m and the length increases to 2.01 m. Assuming no permanent deformation occurs in that material, the modulus of elasticity (GPa) is?