The system in the figure is in equilibrium. A concrete block of mass 185 kg hangs from the end of the uniform strut of mass 45.5 kg. For angles = 30.5° and 0 = 60.8°, find (a) the tension Tin the cable and the (b) horizontal and (c) vertical components of the force on the strut from the hinge. Strut -Hinge

The system in the figure is in equilibrium. A concrete block of mass 185 kg hangs from the end of the uniform strut of mass 45.5 kg. For angles = 30.5° and 0 = 60.8°, find (a) the tension Tin the cable and the (b) horizontal and (c) vertical components of the force on the strut from the hinge. Strut -Hinge

University Physics Volume 1

18th Edition

ISBN:9781938168277

Author:William Moebs, Samuel J. Ling, Jeff Sanny

Publisher:William Moebs, Samuel J. Ling, Jeff Sanny

Chapter12: Static Equilibrium And Elasticity

Section: Chapter Questions

Problem 38P: A uniform horizontal strut weighs 400.0 N. One end of the strut is attached to a hinged support the...

See similar textbooks

Similar questions

A uniform plank of length 2.00 m and mass 30.0 kg is supported by three ropes, as indicated by the blue vectors. Find the tension in each rope when a 700 N person is d = 0.500 m from the left end
A sign is supported by a uniform horizontal boom of length 3.10 m and weight 72.0 N. A cable, inclined at an angle of 16 °with the boom, is attached at a distance of 2.71 m from the hinge at the wall. The weight of the sign is 108.0 N. What is the tension in the cable and what are the horizontal and vertical forces Fx and Fy exerted on the boom by the hinge? Comment on the magnitude of Fy. T= In N Fx= in N Fy= in N The magnitude of Fy is select (small or large) compared to that of Fx and T.
A uniform ladder of length L, rests against a smooth, vertical wall. If the mass of the ladder is m and the coefficient of static friction between the ladder and the groundis μs = 0.40, find the minimum angle θmin at the ladder does not slip?
a uniform beam of length 12.0 m is supported by a horizontal cable and a hinge at angle u =50.0°. The tension in the cable is 400 N. In unit-vector notation, what are (a) the gravitational force on the beam and (b) the force on the beam from the hinge?
The system is in equilibrium. A concrete block of mass 225 kg hangs from the end of the uniform strut of mass 45.0 kg. A cable runs from the ground, over the top of the strut, and down to the block, holding the block in place. For angles f = 30.0° and u = 45.0°, find (a) the tension T in the cable and the (b) horizontal and (c) vertical components of the force on the strut from the hinge.
a uniform beam with a weight of 60 N and a length of 3.2 m is hinged at its lower end, and a horizontal force of magnitude 50 N acts at its upper end.The beam is held vertical by a cable that makes angle u = 25° with the ground and is attached to the beam at height h = 2.0 m. What are (a) the tension in the cable and (b) the force on the beam from the hinge in unit-vector notation?
suppose the length L of the uniform bar is 3.4 m and its weight is 180 N. Also, let the block's weight W = 310 N and the angle 0 = 41°. The wire can withstand a maximum tension of 440 N. (a) What is the maximum possible distance x before the wire breaks? With the block placed at this maximum x, what are the (b) horizontal and (c) vertical components of the force on the bar from the hinge at A?
One end of a uniform rod of weight w = 73.5 N and length L = 2.55 m is supported by a cable at an angle of ? = 37.0°above the rod. The other end rests on a small frictionless support and presses into a wall as shown in the figure. Determine the magnitude n of the vertical normal force exerted by the support on the rod and find the magnitude T of the tension in the cable.
A horizontal plank 4.00 m long and having mass 20.0 kg rests on two pivots, one at the left end and a second 1.00 m from the right end. Find the magnitude of the force exerted on the plank by the second pivot.
A uniform ladder of mass (m= 13.5 kg) and length (L) leans against a frictionless wall. If the angle ©60.0°, find the static friction force between the ladder and the floor when a 60.0-kg person stands two-third of the wayup the ladder?
The system in the figure is in equilibrium. A concrete block of mass 313 kg hangs from the end of the uniform strut of mass 45.0 kg. For angles φ = 23.7° and θ = 66.6°, find (a) the tension T in the cable and the (b) horizontal and (c) vertical components of the force on the strut from the hinge.
The system in the Figure is in equilibrium. A mass M1 = 203.0 kg hangs from the end of a uniform strut which is held at an angle theta = 47.0o with respect to the horizontal. The cable supporting the strut is at angle alpha = 30.0o with respect to the horizontal. The strut has a mass of 59.4 kg. Find the magnitude of the tension T in the cable. Find the magnitude of the horizontal component of the force exerted on the strut by the hinge? Find the magnitude of the vertical component of the force exerted on the strut by the hinge?