The water is flowing through a pipe having diameters 45 cm and 15 cm at sections 1and 2 respectively. The rate of flow through pipe is 35 litres/s. The section 1 is 6 m above datum andsection 2 is 4 m above datum. If the pressure at section 1 is 36 N/cm2,find the following by neglecting losses:(ENTER ONLY THE VALUES BY REFERRING THE UNIT GIVEN IN BRACKETS)) Area of cross section of section1 (unit in m?) =Area of cross section of section2 (unit in m?) =velocity at section 1 (unit in m/s) =velocity at section 2 (unit in m/s) =

Answered: Image /qna-images/answer/126160d5-ca04-4641-a9a9-da35c20cb9a3.jpg

The water is flowing through a pipe having diameters 45 cm and 15 cm at sections land 2 respectively. The rate of flow through pipe is 35 litres/s. The section 1 is 6 m above datum and section 2 is 4 m above datum. If the pressure at section 1 is 36 N/cm?, find the following by neglecting losses: (ENTER ONLY THE VALUES BY REFERRING THE UNIT GIVEN IN BRACKETS) 1) Area of cross section of section1 (unit in m?) = Area of cross section of section2 (unit in m?) = velocity at section 1 (unit in m/s) =

The water is flowing through a pipe having diameters 45 cm and 15 cm at sections land 2 respectively. The rate of flow through pipe is 35 litres/s. The section 1 is 6 m above datum and section 2 is 4 m above datum. If the pressure at section 1 is 36 N/cm?, find the following by neglecting losses: (ENTER ONLY THE VALUES BY REFERRING THE UNIT GIVEN IN BRACKETS) 1) Area of cross section of section1 (unit in m?) = Area of cross section of section2 (unit in m?) = velocity at section 1 (unit in m/s) =

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The water is flowing through a pipe having diameters 20 cm and 10 cm at sections 1and 2 respectively. The rate of flow through pipe is 35 litres/s. The section 1 is 6 m above datum and section 2 is 4 m above datum. If the pressure at section 1 is 39.24 N/cm2, find the intensity of pressure at section 2. Sketch the arrangement.
(Q29) A horizontal pipe of diameter 550 mm is suddenly contracted to a diameter of 300 mm. The pressure intensity in large pipe is given as 14 N/cm2 and the flow velocity in the larger pipe is 2 m/s. Find:- (a) The rate of flow of water through a horizontal pipe. (b) Loss of head due to sudden contraction. (c) Pressure intensity in smaller pipe.
The water is flowing through a pipe having diameters 40 cm and 17 cm at sections 1 and 2 respectreely, The rate of flow through pipe is 45 liters / s .The section 1 is 7 m above datum and section 2 is 4.5 m above datum it the pressure at section 1 is 38.5 N /cm2. find the following by neglecting losses find: 1) Area of cross section of section 1 (UNIT in m2) 2) Area of cross section of section 2 (UNIT in m2) 3) Velocity head at section 1 (UNIT in m ) 4) difference in datum head (UNIT in m) 5) pressure at section 1 ( UNIT in N/m2) 6) pressure at section 2 ( UNIT in N/m2)
A pump is 2.2 m above the water level in the sump and has a pressure of –20 cm of mercury at the suction side. The suction pipe is of 20 cm diameter and the delivery pipe is short 25 cm diameter pipe ending in a nozzle of 8 cm diameter. If the nozzle is directed vertically upwards at an elevation of 4.2 m above the water sump level, determine the power input in KW into the flow by the pump. Neglect all losses. a.20.31 b.24.04 c.0.10 d.0.52
At the bottom of a pressurized water tank is a mouth with a diameter of 5 cm, where water is discharged into the atmosphere. The water level is 2 m above the outlet. The tank air pressure above the water level is 300 kPa (absolute) and the atmospheric pressure is 100 KPA. Determine the initial rate of water discharge (volumetric flow rate) from the tank, neglecting the effects of friction.
In the following figure, a machine is installed in the water drainage system. Knowing that the machine's efficiency is 75%, obtain the flow direction, whether the machine is a pump or a turbine and its power.The pressure measured by the manometer above the machine is equal to 150 kPa and the pressure loss is given by lw= K* u2b / 2(m2/s2). Between sections (1) and (2), K1-2 = 3.0, and between sections (2) and (3), K 2-3 = 1.5. D = 15 cm, ρ= 103 kg/m3 and 1HP = 745,7 W (watt)
Water flows through a garden hose at a rate of 1 l/s. The upstream diameter of the hose is 2.5 cm, and the nozzle outlet has a diameter of 1 cm. Determine the upstream pressure (gage pressure).
Flow takes place between three reservoirs, as shown in Figure 1. The volume flow rate out of reservoirs A and B is 0.15 m3/s and 0.25 m3/s respectively. If the coefficient of friction for the three pipes is 0.008, determine the relative elevations of the free surfaces. Neglect all losses other than friction. L1 = 1000 m D1 = 200 mmL2 = 1500 m D2 = 250 mmL3 = 2000 m D3 = 400 mm
Water from a reservoir is pumped over a hill through a 450 mm diameter and an absolute pressure of 1.0 kg/cm^2 is maintained at the summit. Water discharge is 30 m above the reservoir. The quantity pumped is 0.5 m^3/s. frictional losses is discharge and suction pipe, and pump is equivalent to 1.5 m. The speed of the pump is 800 rpm. Determine the following: A. Water power of the pump B. New value of discharge if the speed of the pump is increased to 1000 rpm C. New value of head if the speed of the pump is increased to 1000 rpm D.New value of power if the speed of the pump is increased to 1000 rpm
2.4) A pipe discharges 142 lps of water into a reservoir at a point 1.85 m below the water surface. At point A the diameter is 25.4 cm and the center of the pipe is 1.25 m above the water surface. At the discharge end the pipe is 30.5 cm. If the head loss from A to the reservoir is 0.7 m, determine the pressure in A.
Pump Horsepower in Brine System. A pump pumps 0.200 ft3/s of brine solution having a density of 1.15 g/cm3 from an open feed tank having a large cross-sectional area. The suction line has an inside diameter of 3.548 in. and the discharge line from the pump a diameter of 2.067 in. The discharge flow goes to an open overhead tank, and the open end of this line is 75 ft above the liquid level in the feed tank. If the friction losses in the piping system are 18.0 ft lbf/lb m, what pressure must the pump develop and what is the horsepower of the pump if the efficiency is 70%? The flow is turbulent.
Given parameters D1=30 cm L1=300 m D2=20 cm L2=150 m D3=25 cm L3=200 m f1=0.018, f2=0.02, and f3=0.019, determine the flow rate between reservoirs A and B, which are connected to each other as shown in the diagram. Note that the sudden contraction loss coefficient k is assumed to be 0.24.