Three purely resistive loads, each of 50 ohms, are connected in wye to a three-phase, 120-V supply. Three inductive coils, each of reactance 75 ohms connected in delta are also connected to the supply. Calculate: (A) Line-currents: ● la L Ib L Ic (B) power factor of the system (Assume a phase sequence of an-bn-cn.)

Three purely resistive loads, each of 50 ohms, are connected in wye to a three-phase, 120-V supply. Three inductive coils, each of reactance 75 ohms connected in delta are also connected to the supply. Calculate: (A) Line-currents: ● la L Ib L Ic (B) power factor of the system (Assume a phase sequence of an-bn-cn.)

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter2: Fundamentals

Section: Chapter Questions

Problem 2.45P: Two balanced Y-connected loads, one drawing 10 kW at 0.8 power factor lagging and the other IS kW at...

See similar textbooks

Similar questions

Consider a three-phase Y-connected source feeding a balanced- load. The phasor sum of the line currents as well as the neutral current are always zero. (a) True (b) False
Three purely resistive loads, each of 100 ohms, are connected in wye to a three-phase, 110-V supply. Three inductive coils, each of reactance 80 ohms connected in delta are also connected to the supply. Calculate: (A) Line-currents, Ia ________________ ∠_______________, Ib ________________ ∠_______________, Ic ________________ ∠_______________, and (B) power factor of the system . Assume a phase sequence of an-bn-cn.
Consider the balanced 3-phase circuit shown below (a) Sketch the single phase equivalent circuit. Show all values on the sketch. (b) Calculate the following: the total complex power absorbed by the wye connected load. the phase current, ICA.
A balanced, three-phase, positive sequence, with grounded neutral source, supplies power to a balanced delta connected load. For the system, additional information are as follows: Vbc = 443 cis 191 degrees volts; and Ic = 10.5 cis99 degrees amperes What is the value of the total real power of the delta load in watts?
A balanced delta-connected load with impedance (25.98 + j15) ohms per phase is connected to a 3-phase, 3-wire, 250-V system by conductors having an impedance of (0.4 + j0.3) ohms per conductor. Find the line to line voltage at the load.
A balanced delta connected load of 14+j16 ohm per phase is connected at the end of three phase line. The line impedance is 4+j6 per phase . The line is supplied from athree source with a line to line voltage of 207.85 Vrms. Tnaking phase voltage Va as reference determine the following: a) I in phase a b) Total complex power supplied from the source c) Magnitude of the line to line voltage at the load terminal.
The power system insulation problem involves a. Capacitance of earth and subsequent grounding b. Selection of basic insulation level of system equipment c. Determination of single phase line insulation d. Determination of three phase line insulation Clear my choice
An Alternator having three-phase, 3-wire ABC system supplying an effective line voltage of 120 V, has an athree-impedances of 50 / 45 ohms in Delta connection. Assume that Vbc is the reference vector. Determine a) linecurrent and line voltages with its degrees, b)Draw the current –voltage phasor diagram c) and the power generated inthe line quantities of the alternator.
A 220-V, 3- φ voltage is applied to a balanced delta-connected 3- φ load of phase impedance (15 + j20) Ω. Find the line voltage in volts
A balanced, positive-sequence, Y-connected voltage source with Eab = 480∠0o volts is applied to abalanced-∆ load with Z∆ = 30 ∠40o Ω. The line impedance between the source and load is ZL = 1 ∠850 Ω.for each phase. Calculate the line currents, the ∆ -load currents, and the voltages at the load terminals.Recall that ZY = Z∆/3
Let the three-phase electrical system be illustrated in Figure . Knowing that its phase sequence is ABC and that Vcb=380∠135°V, determine the following: a) The value of the line currents demanded by each of the loads and supplied by the source. b) The power and power factor of each load and source. c) The power of the capacitor bank that must be installed to correct the power factor to 0.95 lagging. d) The currents supplied by the source after installing the capacitor bank. e) The percentage reduction of the total apparent power supplied by the source after installing the capacitor bank.
Non-Reactive Loads of 10kW, 20kW and 12kW are connected between the neutral and the red, yellow and blue phases respectively of 3-phase, 4 wire . The line voltage is 400. If a three phase motor is now started ,taking 150 A from the lines at a power factor of 0.3 lagging What should be the total current in each line and the neutral wire? Find the total real and reactive power supplied to the loads