Two torques are applied to a solid round shaft as shown. The moduli of rigidity are 29 GPa for segment AB and 77 GPa for segment BC. The outside diameters and lengths of the shaft are given below. Find the magnitude of the angle of twist of each segment of the shaft, as well as the angle of twist of the whole shaft (from A to C). Тв Tc 57.3 N - m 119.4 N - m a 39.8 cm 33.8 cm 18.5 тm 13.8 mm 2014 Michael a 0e0 Swanbom Te Angle of Twist Segment AB BC overall

Two torques are applied to a solid round shaft as shown. The moduli of rigidity are 29 GPa for segment AB and 77 GPa for segment BC. The outside diameters and lengths of the shaft are given below. Find the magnitude of the angle of twist of each segment of the shaft, as well as the angle of twist of the whole shaft (from A to C). Тв Tc 57.3 N - m 119.4 N - m a 39.8 cm 33.8 cm 18.5 тm 13.8 mm 2014 Michael a 0e0 Swanbom Te Angle of Twist Segment AB BC overall

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter1: Tension, Compression, And Shear

Section: Chapter Questions

Problem 1.3.17P: A stepped shaft ABC consisting of two solid, circular segments is subjected to torques T}and...

See similar textbooks

Related questions

Q: he two solid steel shafts shown in the figure are connected by gears. Determine the angle of twist…

A: Given Shear modulus, E = 70 GPa Torque, T = 25 N Diameter, d = 20 mm Find…

Q: A single torque of T = 60 N.m is applied to a compound torsion member. Segment (1) is a 32-mm…

Q: A steel 0.75-in diameter shaft (G= 12,000 ksi) is subjected to the following torques in lb-ft: TA =…

Q: Find the maximum stress developed in a stepped shaft when it is subjected to a: i) Torque of “T” Nm.…

Q: For the shaft shown in the figure below, compute the angle of twist of pulleys B and C relative to…

Q: A solid shaft of diameter 10 mm is subjected to a torque of 15 N/m. considering modulus of rigidity…

A: The angle of twist is 2.74° (Option D is correct).

Q: A steel shaft ABCD of length L = 6.5 is shown in Figure 4. Given the torque at A, B, C and D is 80…

Q: Plot a torque diagram showing the internal torque in segments (1), (2) and (3) of the shaft. Show…

Q: Find the maximum shear stress and rate of twist for an applied torque Mi for the section shown in…

A: given; where;⇒t=thickness⇒a and b are dimensions. ⇒t<<a,b

Q: A hollow steel shaft with an outside diameter of 75 mm and a wall thickness of 5 mm is subjected to…

A: The given values are - do =75 mm, t=5 mm, T =4090×1000 Nmm, G =80×1000 Mpa, L=2000mm The inside…

Q: A solid circular steel shaft having an outside diameter of 1.75 in. is subjected to a pure torque of…

A: Given data: ◆ The diameter of solid circular shaft: D = 1.75 inch ◆ The torque applied on the shaft:…

Q: An aluminum shaft with a constant diameter of 70 mm is loaded by torques applied to gears attached…

Q: В x (in) r = 2e0.05x 100 kip-in r (in) A 10 in 100 kip-in The solid torsional shaft above is…

Q: 1. The aluminum rod, AB (G = 27 GPa), is bonded to a brass rod BD (G = 39 GPa) and torques, T, = 800…

A: The twist of point B can be determined as,

Q: The shaft of a motor has a length of 15 times its diameter and has a maximum twist of 1.5 degrees…

A: Given: The length of shaft of motor, L = 15d The maximum twist in shaft = 1.5o The torque applied, T…

Q: Figure Q1 shows a 1.4 m long steel shaft that consists of a hollow segment AB and a solid segment…

A: From the above figure : TB=TA+750...........................(1)

Q: 75 N.m C 125 N.m 2 m 1m A steel shaft is fixed at A and is subjected to the torques as shown.…

A: Given data: dAB=50 mmdBC=30 mmG=77 GPa Need to determine the torque in segment AB, BC and angle of…

Q: A hollow steel shaft is stressed to 55 MPa by a torque of 100,000 ft-lb. If the inside diameter is…

Q: Determine the torque that can be transmitted by a shaft of 50 mm diameter, if the maximum allowable…

Q: The circular shaft AB consists of a 19.5 mm diameter solid steel cylinder in which a 5.3 mm diameter…

Q: Question 3 A steel shaft ABCD of length L = 6.5 is shown in Figure 4. Given the torque at A, B, C…

Q: A solid circular steel shaft having an outside diameter of D = 1.25 in. is subjected to a pure…

Q: Determine the allowable torque a hollow steel shaft can transmit if the outside diameter is 4…

A: Torque for hollow shaft can be determined as Note – take outer diameter as allowable stress is given…

Q: 25 marks Q4: For the aluminum pipe shown in figure below (G-27GPa).Determine (a) The torque To…

Q: 2010 T3 T2 T1 D b0100018 b01000 1812 2010 `dcp dBc B. b01000 dAB In the figure above, torques TI, T2…

A: Consider a shaft having a uniform length and varying diameter. Three torque are applied at sections…

Q: 5. The shaft of a motor has a length of 15 times its diameter and has a maximum twist of 1.5 degrees…

Q: J = = (r* – r^) (Tubular shaft) Ø = Tr %3D J = (Solid shaft) 2. The steel shaft is subjected to the…

A: angle of twist of the overall length of the shaft,ϕAC=ϕAB+ϕBC

Q: A solid shaft 2 m. long is stressed 60 MPa when transmitted a power of 50 kW at 2 rev / sec. If G =…

A: Given :- Length, L = 2m Power, P = 50kW Rotational speed, n = 2 rev/s…

Q: The circular shaft AB consists of a 24.8 mm diameter solid steel cylinder in which a 11.6 mm…

Q: A steel 0.75-in diameter shaft (G= 12,000 ksi) is subjected to the following torques in lb-ft: TA =…

A: Given data Diameter of shaft = 0.75 inShear modulus = G = 12000 ksiTorque in pulley A = 10 lb…

Q: The outside diameter of a hollow shaft is 1.6 times the inside diameter. When transmitting 420 W of…

Q: A circular shaft of the dimensions shown in the following figure is subjected to three torques : T1…

Q: A solid constant-diameter shaft is subjected to the torques shown. The bearings shown allow the…

Q: In the shaft shown in the figure, the gears are attached to the A992 steel shaft (G = 75 GPa). find…

Q: A single torque of T = 60 N.m is applied to a compound torsion member. Segment (1) is a 32-mm…

A: The angle of rotation: The angle at which the fixed end rotates with respect to the free end is…

Q: A solid 0.64-in.-diameter shaft is subjected to the torques shown. The bearings shown allow the…

A: The problem is based on strength of material

Q: aluminum shaft with a constant diameter of 60 mm is loaded by torques applied to gears attached to…

Q: The circular shaft AB consists of a 22.9 mm diameter solid steel cylinder in which a 11.8 mm…

Q: A hollow steel shaft, 5.7 ft long, has an outer diameter of 2.96 in. and an inner diameter of 1.45…

A: Given Length, L = 5.7 ft = 1.73 m Outer diameter, D = 2.96 in = 0.075 m Inner…

Q: 3.27 The two identical shafts, 1 and 2, are built into supports at their left ends. Gears mounted on…

Q: 3 T 100 mm 75 mm В 3.00 m 2.70 m G=28 GPa G=35 GPa

A: Stress: When a component or a part is subjected to any external force, a resisting force will be…

Q: Problem 1

A: Due to the torques at point B, C, D, E, and G, there exists a reaction torque at point A.Sign…

Q: A hollow steel shaft with an outside diameter of 75 mm and a wall thickness of 5 mm is subjected to…

Q: A steel shaft ABCD of length L = 6.5 is shown in Figure 4. Given the torque at A, B, C and D is 80…

Q: Ex: A Torque (T) is applied to a solid taper shaft with built-in ends, as shown in Figure, Determine…

Q: A solid circular steel shaft having an outside diameter of D = 1.00 in. is subjected to a pure…

Q: A hollow steel shaft 2540 mm long must transmit a torque of 34 kN-m. The total angle of twist must…

Q: 3) Two circular shafts (shown in Figure) made of the same material and have the same length are…

Q: A hollow steel shaft is stressed to 35 MPa by a torque of 200000NM. Determine the outside diameter…

Question

Problem 3

Two torques are applied to a solid round shaft as shown. The moduli of rigidity are 29 GPa for segment AB and 77 GPa for segment BC. The outside diameters and lengths of the shaft are given below. Find the magnitude
of the angle of twist of each segment of the shaft, as well as the angle of twist of the whole shaft (from A to C).
Тв
Tc
57.3 N - m
119.4 N - m
a
39.8 cm
33.8 cm
18.5 тm
13.8 mm
2014 Michael a 0e0
Swanbom
Te
Angle of Twist
Segment
AB
BC
overall

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

Step 2

Step 3

Step 4

Step 5

Step 6

Step 7

Step 8

Step 9

Trending now

This is a popular solution!

Step by step

Solved in 9 steps with 10 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Elastic Constants and Their Relationship

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

A hollow tube ABCDE constructed of monel metal is subjected to five torques acting in the directions shown in the figure. The magnitudes of the torques are T1= 1000 lb-in., T2= T4= 500 lb-in., and T3= T5= 800 lb-in. The tube has an outside diameter of d2= 1.0 in. The allowable shear stress is 12,000 psi and the allowable rate of twist is 2.0°/ft. Determine the maximum permissible inside diameter d1, of the tube.
A motor driving a solid circular steel shaft with diameter d = 1.5 in, transmits 50 hp to a gear at B, The allowable shear stress in the steel is 6000 psi. Calculate the required speed of rotation (number of revolutions per minute) so that the shear stress in the shaft does not exceed the allowable limit.
What is the maximum power that can be delivered by a hollow propeller shaft (outside diameter 50 mm, inside diameter 40 mm, and shear modulus of elasticity 80 GPa) turning at 600 rpm if the allowable shear stress is 100 MPa and the allowable rate of twist is 3.0°/m?
Engineering Mechanics. A solid circular steel shaft having an outside diameter of 2.00 in. is subjected to a pure torque of T = 8940 lb-in. The shear modulus of the steel is G = 12,000 ksi. Determine the magnitude of the angle of twist in a 6.50-ft length of shaft.
A solid shaft in a rolling mill transmits 30 hp at 100 rpm. Find the diameter in mm of the shaft so as not to exceed a shearing stress of 42 MPa and an angle of twist of more than 5 degrees in a length of 3 meters. G = 83 GPa
A hollow steel shaft is stressed to 35 MPa by a torque of 200000Nm. Determine the outside diameter in mm if the inside diameter is 2/3 of the outside diameter both in mm.
A solid shaft in a rolling mill transmits 20 kW at 2 revolutions per second. The length of the shaft is 3 m and modulus of rigidity is 83,000 MPa. Which of the following gives the torque carried by the shaft?a. 1.59 kN-m c. 2.69 kN-mb. 3.45 kN-m d. 4.81 kN-m Which of the following gives the minimum diameter so that the allowable torsional shearing of 40 MPa will not beexceeded?a. 88 mm c. 59 mmb. 45 mm d. 76 mm Which of the following gives the minimum diameter so that the allowable angle of twist of 6O will not be exceeded?a. 29 mm c. 35 mmb. 49 mm d. 55 mm
Calculate the maximum and minimum shear stress in a hollow circular shaft of outer diameter 20 mm and thickness 2 mm, subjected to a torque of 92.7 N-m.
What is the minimum diameter of a solid steel shaft that will not twist through more than 3° (degrees) in a 6 m. length when subjected to a torque of 14 kN-m? Use G = 83 kN/ m^2. Convert your answers to mm.
The circular shaft shown (Figure 2) has dimensions D1 = 24 cm , L1 = 6 m, D2 = 17.5 cm, and L2 = 4 m with applied torques T1 = 100 kN⋅m and T2 = 40 kN⋅m. The shear modulus is G1 = 60 GPa. Point B is halfway between points A and C. a) Draw the torque diagram for the shaft, using the right-hand rule to determine the correct signs. b) For the given shaft, what is the angle of twist at the free end, point D?
A 39 in. tubular shaft is in torsion under a torque of 34 lb-in.. Its cross-section shown below as diameter d1 = 3.2 in., diameter d2 = 1.4 in. If it is a soft tube, and G = 315 psi, calculate the angle of twist of the shaft: _____ O (degrees). Pay attention to units, and calculate your answer to one decimal place.
The circular shaft shown (Figure 2) has dimensions D1 = 24 cm , L1 = 6 mm, D2 = 17.5 cm, and L2 = 4 mm with applied torques T1 = 100 kN⋅m and T2 = 40 kN⋅m. The shear modulus is G1 = 60 GPa. Point B is halfway between points A and C. a) Draw the torque diagram for the shaft, using the right-hand rule to determine the correct signs. b) For the given shaft, what is the angle of twist at the free end, point D?