1. Water is used as the working fluid in an ideal Rankine cycle. Saturated liquid enters the pumpwith a specific volume of 1.2720 X 10°m/Kg and exits (the pump) at 1.7530 X 10° m²/Kg and atemperature of 380°C.The internal energy at the exit of the turbine is 2,500KJ/Kg. Determine:a. The network produced in KJ/Kgb. The heat transfer to the steam in the steam generator in KJ/Kgc. The thermal efficiencyd. The heat transfer to cooling water passing through the condenser in KJ/Kg of steam condensed.TWturb,outGin14JoutW.pump,in2.

Answered: Image /qna-images/answer/0066a301-22fb-4717-8525-ba3bceb9ada3.jpg

Water is used as the working fluid in an ideal Rankine cycle. Saturated liquid enters the pump with a specific volume of 1.2720 X 10°m²/Kg and exits (the pump) at 1.7530 X 103m²/Kg and a temperature of 380°C.The internal energy at the exit of the turbine is 2,500KJ/Kg. Determine: The network produced in KJ/Kg The heat transfer to the steam in the steam generator in KJ/Kg The thermal efficiency The heat transfer to cooling water passing through the condenser in KJ/Kg of steam condensed.

Water is used as the working fluid in an ideal Rankine cycle. Saturated liquid enters the pump with a specific volume of 1.2720 X 10°m²/Kg and exits (the pump) at 1.7530 X 103m²/Kg and a temperature of 380°C.The internal energy at the exit of the turbine is 2,500KJ/Kg. Determine: The network produced in KJ/Kg The heat transfer to the steam in the steam generator in KJ/Kg The thermal efficiency The heat transfer to cooling water passing through the condenser in KJ/Kg of steam condensed.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A binary vapor power cycle consists of two ideal Rankine cycles with steam and Refrigerant 134a as the working fluids. The mass flow rate of steam is 2 kg/s. In the steam cycle, superheated vapor enters the turbine at 8 MPa, 560°C, and saturated liquid exits the condenser at 50 kPa. In the interconnecting heat exchanger, energy rejected by heat transfer from the steam cycle is provided to the Refrigerant 134a cycle. The heat exchanger experiences no stray heat transfer with its surroundings. Superheated Refrigerant 134a leaves the heat exchanger at 600 kPa, 30°C, which enters the Refrigerant 134a turbine. Saturated liquid leaves the Refrigerant 134a condenser at 100 kPa.Determine:(a) the net power developed by the binary cycle, in kW.(b) the rate of heat addition to the binary cycle, in kW.(c) the percent thermal efficiency of the binary cycle.(d) the rate of entropy production in the interconnecting heat exchanger, in kW/K.
1.5An ideal Rankine cycle with reheat uses water as the working fluid. As shown in the figure below, the conditions at the inlet to the first turbine stage are 1600 lbf/in.2, 1200°F and the steam is reheated to a temperature of T3 = 800°F between the turbine stages at a pressure of p3 = p2 = 200 lbf/in.2 For a condenser pressure of p5 = p4 = 1 lbf/in.2, determine:(a) the quality of the steam at the second-stage turbine exit. h6≈h5+v5(p6−p5)h6≈h5+v5(p6-p5)Determine the quality of the steam at the second-stage turbine exit. x4 =(b) the cycle percent thermal efficiency.
A simple rankine ideal cycle with water as the working fluid. Twenty kilograms of steam enters the turbine at 7.356 MPa and 500.356 oC and is cooled in the condenser at a pressure of 10.356 KPa by running cooling water from a lake through the tubes of the condenser at rate of 2000 kg. Show the T-s diagram and schematic of simple rankine cycle. For cycle determin (a) the turbine work, (b) the heat added, (c) the temperature rise of the cooling water, (d) the thermal efficiency of the cycle. For engine, determine (e) the heat added, (f) the thermal efficiency of the engine, and (g) Draw the T-s and schematic diagram.
A thermal power plant works according to a Rankine Cycle with Regeneration with an open heater. The steam enters the first stage of the turbine at 10 MPa and 650 °C, expanding to 1.4 MPa. Subsequently, part of the steam is extracted and leads to the open heater that operates at 1.4 MPa. The remaining steam expands through the second stage of the turbine to a capacitor pressure of 5 kPa. For isentropic processes in both turbines and pumps, determine the enthalpy values of all points in the cycle, as well as the efficiency of the latter.
A binary vapor power cycle consists of two ideal Rankine cycles with steam and Refrigerant 134a as the working fluids. The mass flow rate of steam is 2 kg/s. In the steam cycle, superheated vapor enters the turbine at 8 MPa, 600C, and saturated liquid exits the condenser at 250 kPa. In the interconnecting heat exchanger, energy rejected by heat transfer from the steam cycle is provided to the Refrigerant 134a cycle. The heat exchanger experiences no stray heat transfer with its surroundings. Superheated Refrigerant 134a leaves the heat exchanger at 600 kPa, 30C, which enters the Refrigerant 134a turbine. Saturated liquid leaves the Refrigerant 134a condenser at 100 kPa. Determine (a) The net power developed by the binary cycle, in kW. (b) The rate of heat addition to the binary cycle, in kW. (c) The thermal efficiency of the binary cycle.
A 272-MW steam power plant operates on the Rankine cycle but with turbine and pump efficiencies of 90%. The steam enters the turbine at 10,000 kPa and 550°C. It discharges to the condenser at 50 kPa. Determine the mass flow rate in kg/s.?
Steam enters the high-pressure turbine of an ideal reheat Rankine cycle at 10 MPa and 500°C. The low-pressure turbine inlet admits steam at 1 Mpa. Assume that the pump inlet is a saturated liquid at 10 kPa and that 80 MW of power is produced overall. 1. Using the property tables for both the inlet and outlet of the pump, determine the enthalpy in kJ/kg of the pump outlet. 2. Report the amount of heat added, in kJ/kg, in the boiler before the high-pressure turbine to one decimal place using rounding. 3. Report the amount of work produced in the high-pressure turbine, in kJ/kg, to one decimal place using rounding. 4. Report the amount of heat added in the reheat process, in kJ/kg, to one decimal place using rounding. 5. Report the amount of work produced in the low-pressure turbine, in kJ/kg, to one decimal place using rounding.
Question No.16: In a Rankine cycle, the steam at inlet to turbine is saturated at a pressure of 35 bar and the exhaust pressure is 0.2 bar. The flow rate of steam is 0.2 kg/s. Determine (i) the pimp work (ii) the turbine work (iii) Rankine efficiency (iv) Condenser heat flow (v) work ratio and (vi) specific steam consumption
In a simple Rankine cycle, the steam throttled condition is 8 MPa and 480°C. The steam is then reheated to 2 MPa and 460 °C. If turbine exhaust is 60 °C, determine the following: a. Heat Added b. Turbine Work c. Heat Rejected d. Pump Work e. Net Work f. Efficiency
An ideal Rankine cycle with reheat uses water as the working fluid. As shown in the figure below, the conditions at the inlet to the first turbine stage are 1600 lbf/in.2, 1200°F and the steam is reheated to a temperature of T3 = 800°F between the turbine stages at a pressure of p3 = p2 = 200 lbf/in.2 For a condenser pressure of p5 = p4 = 1 lbf/in.2, determine:(a) the quality of the steam at the second-stage turbine exit.(b) the cycle percent thermal efficiency.
In a Rankine Cycle , saturated liquid water at 1 bar is compressed isentropically to 150 bar. First by heating in a boiler and then by superheating at constant pressure of 150 Bar, the water substance is brought to 750 K. After Adiabatic reversible expansion in a turbine at 1 Bar, it is then cooled in a condenser to a saturated liquid. How much work is generated in the turbine? (include diagram)
Consider a power plant that operates on a simple ideal Rankine cycle with refrigerant- 134a (a pure substance) as the working fluid; not water! The refrigerant enters the turbine as a saturated vapour at 1.4 MPa and leaves at 0.7 MPa. The mass flow rate of the refrigerant is 3 kg/s. [Hint: Use Property Tables for R-134a.] (a) Draw this simple ideal Rankine cycle on T-s diagrams. Determine: (b) the thermal efficiency of the cycle and (c) the power output of this plant.