Lab 1 Report Hakeem Khan

Complete the following text with words Pt100 sensors are a specific type of _____(1) detector. The most important characteristic of Pt100 elements is that they are made of _____(2) with an electrical resistance of _____(3) ohms at a temperature of ______(4) °C and temperature coefficient ____(5). It is by far the most common type of RTD sensor. The other materials with which RTDs are built are: ___(6), _____(7), ______(8). The most recommended conditioning method is reading at _____(9). Typically, a _____(10) behavior of the Resistance-Temperature relationship can be assumed.

Please solve question no.6 and show a clear and readable solution. Choose the letter of the correct answer. Thanks!!!

As an electrical and electronic engineer, your manager has asked you to write a report for the attention of new employees, listing and describing the operation of safety devices that are commonly found offices and other industrial situations. The report should include all of the details in the task below.     Task   For the following application, list two electrical safety devices that can be used, and describe their operation:A Star delta starting induction motors

1) Power for the field devices typically comes from ________.A) The PLC power supply B) Isolated factory floor voltage sourcesC) The PLC I/O module D) None of the above1)2) The output of a TON timer is true whenA) its input (IN) is true and the elapsed time (ET) is less than the preset time (PT)B) its input (IN) is false and the elapsed time (ET) exceeds the preset time (PT)C) its input (IN) is false and the elapsed time (ET) is less than the preset time (PT)D) its input (IN) is true and the elapsed time (ET) exceeds the preset time (PT)2)3) Convert 8B3F16 to binary.A) 1011001111100011 B) 011010C) 35647 D) 10001011001111113)4) The memory size of a double word (DWord or MD) is ________.A) Eight bits B) Four bytes C) Sixteen bits D) Eight bytes4)5) PLCs are ________ designed for use in the control of a wide variety of manufacturing machines andsystems.A) personal computers B) electromechanical systemsC) special-purpose industrial computers D) All of the above5)6) Convert…

Please make sure the answer is correct 100%

Can you finish the Background including a synopsis of the relevant information of this this example "electrical maintenance and repair" And please cite an article or paraphrase of author. Thank you! The electrical wiring and electrical devices in the houses that are installed may have failure so the inspection is designed to definitely perform the clear capabilities. These electrical devices are...

The system having ±0.5% of F.S.D if the full scale deflection is 50 units, then accuracy is _____ a. ±0.25 b. ±1 c. ±0 d. ±0.5

a) Write down and prove DeMorgan's theorem. b) Remove the following complements using DeMorgan's theorems. ______________________           _________________                   _____________ P+ Q + (C+D.E').  (F+G)

Solve it quickly please

3 Programming the device involves the blowing of internal fuses to achieve a desired_________________ a. logic function. b. Normal function c. function d. None of the above Clear my choice

Estimate the length of conduit to perform the next bends. EMT will be bend using a hand bender. Provide your answer in inches (just the number) using up to 2 decimals. The picture shows two panels connected by a back-to-back 23.5" stubs EMT 3/4" 6.25 ft P

Using the notation scheme for defining manipulator configurations, draw diagrams of the following robots. Label each joint in the diagram. (i) TVR:TR (ii) VROT:R

i need the answer quickly

Correct and detailed answer will be Upvoted else downvoted. Thank you!

- List main features of Embedded System. Please explain the question step by step and please care to explain the question in detailed with your own sentence and explain why you used that formula, calculations etc. Thanks in advance.

Note: Give me right solution according to the question. Don't copy from other websites solution,if I noticed copied solution I will give dislike.... Thank you A mechanical press has a stopping time for its press-brake mechanism of 0.34 sec and a stopping time for the control circuit of 0.04 sec. The brake monitor is set for 0.48 sec, and the minimum object sensitivity is 0.76 in. Calculate the minimum safe distance that the light curtain can be installed from the press.

1 degree of closeness to the true value. It is often expressed as a percentage full scale deflection is called ______________ a. Sensitivity b. Error c. Accuracy d. Range

How do I calculate that step by step?

Four electricians are discussing wiring under raised floors in information technology equipment rooms. Electrician A says that wiring under the raised floor requires fire-resistant walls, floors, and ceilings between other occupancies. Electrician B says that wiring under the raised floor requires fire resistant halfway up the walls and floors between other occupancies. Electrician C says that the room must employ a disconnecting means that removes half of the power to all equipment in the room. Electrician D says that a disconnecting means isn't necessary for the room. Which of the following statements is correct? A. Electrician B is correct. B. Electrician D is correct. C. Electrician A is correct. D. Electrician C is correct.

ACTIVITY TITLE: SAFETY PRECAUTIONS ON ASSEMBLING ELECTRONIC LIGHT DIMMER DIRECTIONS: Look at the pictures below and write something about hazards, how it can harm someone and what OHS strategy to be follow. You can write your answers in English, Tagalog or combination of English and Tagalog. LOOK! THINK! WORKPLACE DO! HAZARD/ACCIDENT What is the Can the hazard OHS strategy? hazard? harm someone?

Q4/   Complete the blank In induction type energy meter, Recording system consists of a set of dials and..................................................?

4. a) Explain the issues to be considered in the location of wind energy systems. b) Draw the block diagram of the variable speed wind energy system and explain it briefly. please write it with computer thanks alot .

Is Microwave Oven an open loop or closed loop system? Write the reason for your answer. For the Microwave Oven system, draw a simple block diagram with the name of input, output and control system used

Answer the questions correctly. Enter the numerical value being asked for each item in the designated field. Note that the unit of measurement of the desired values has already been indicated in the problem. Express your answers accurate to four decimal places. Do not include spaces and commas when entering the values. Whale and Kanmuro are two islands located in the Chimera archipelago. These two are separated by a distance of 20 miles. A power link is to be established between them. The power link delivers a maximum power of 600 MW at full capacity with an operating voltage of 500 kV. Solve for the resistivity of the cable, assuming a conductor diameter of 1.5 cm. Express your answer in μΩ·m.

Subject: Digital Logic Design An aircraft’s functional monitoring system. A circuit is required to indicate the status of the landing gears prior to Take off. The plane has three landing gear: right, left and center. After the takeoff, the pilot will activate ‘gear up’ switch to retract the landing gear. Assume that has been done. A green LED will turn on in the cockpit only if all three landing (03) gear are properly retracted. A red LED will turn on if any of the three (03) landing gear fail to retract properly after takeoff. When landing gear is properly retracted, a corresponding sensor will provide High voltage to a logic circuit. When a landing gear has failed to retract properly, the sensor provides a Low voltage signal to the logic circuit. Design and implement the circuit of the system with the help of logic gate.

Select the best answer from multiple choices:

Part 2: Analysis and selection of the Wind Turbine.The team decides at install a 30 MW wind farm. The turbine that has been selected by the local contractor is an Enercon wind turbine. The specifications of all the available Enercon wind turbine is shown in the attached datasheet. 1. What are the two closed loop control systems that are used generally in wind turbines? How do they work? 2. Calculate the power density of the input power from the wind when the wind is blowing at the rated wind speed at the turbine height. Clearly show your steps in details.

i need the answer quickly

a.What is an ROC?    b.What is a cold site?    c,What is fault tolerance?

Block diagram of Arduino car speed Detector ana explains operating

Good day! Please help me define LDA, ADD, SUB, OUT, and HALT in SAP - 1.   Subject: Digital Electronics.