W01 Quiz Syallbus TA 115

Directions: Read each question carefully. Choose the letter of the correct answer. Use a separate sheet of paper for your answer. 1. What do you call an energy converting system that transforms electrical energy into mechanical movement? A. Electric motor B. Electric field C. Electric generator D. Electric plasma 2. Which of the situation below shows how a basic electric motor works? A. The energy contained in the batteries of the vehicle is transformed into wheel rotation. B. Electrical energy converted into blade rotation in the food processor and cut down food. C. Both A and B D. None of these 3. Which is the correct sequence in the operation of generator in the production of electricity in Hydroelectric Power Plant? I. A turbine converts the kinetic energy of the falling water into mechanical energy. II. Hydropower plants capture the energy of falling water to generate electricity. III. Once an electrical current has been established, it is directed through copper wires to power…

10)This multiple choice question from MEASUREMENTS INSTRUMENTATIONS course.

Draw

Please help me answer no. 4 below. Please provide a clear and readable explanation. I appreciate any help you can provide. The course subject is Electrical Machines. NOTE: Figures and sketches are required.

Please answer fast I'll rate you sure ?....

Please answer with detail and how it is done. Photo is attached with the questions.

Pls can you answe this

Draw a class diagram to capture the following situation: “Every student is enrolled in a course. Each student may be enrolled in a set of units. Some units are core units for one or more courses and some units are elective units for one or more courses."

Multiple Attempts Not allowed. This test can only be taken once. Force Completion This test can be saved and resumed at any point until time has expired. The timer will continue to run if you leave the test. Remaining Time: 54 minutes, 38 seconds. * Question Completion Status: A Moving to another question will save this response. Quèstion 7 1 p What are the quotient and remainder when – 35 divided by 4 ? -7 and -7 -8 and -3 -9 and 1 9 and 1

53 seconds. A Question Completion Status: 7C 20 50 32 33 34 35 360 37 38 39 40 QUESTION 35 Altitude is displayed in which unit? Feet. O Meter. O Inches. QUESTION 36 Which indicator is used to measure the speed of aircraft in Knots O Alimeter indicator Airspeed indicator O Vertical speed indicator Click Save and Submit to save and submit. Click Save All Answers to save

Answer the questions correctly. Enter the numerical value being asked for each item in the designated field. Note that the unit of measurement of the desired values has already been indicated in the problem. Express your answers accurate to four decimal places. Do not include spaces and commas when entering the values. Whale and Kanmuro are two islands located in the Chimera archipelago. These two are separated by a distance of 20 miles. A power link is to be established between them. The power link delivers a maximum power of 600 MW at full capacity with an operating voltage of 500 kV. Solve for the resistivity of the cable, assuming a conductor diameter of 1.5 cm. Express your answer in μΩ·m.

Give one sample word problem/question related to this topic with solution

Please answer the two questions, and in the other picture are the drawing we had made. (Which are the schematic symbol(types) of electrical loads, switches, resistors, logic gates, and diodes. Questions: 1.) Describe how lines and symbols best represent the components or devices. 2.) Enumerate the technique/s you applied in order to draw and remember the name and basic function of each schematic symbol.

3. What did you learn about yourself as you worked on this performance task? Note instructions: solve all accurate fill diagram and solve questions take 24hrs but solve all accurate don't use Ai for answer okk only 100% sure experts solve it correct complete solutions okkkkkk will give good feedback

GIVE ME THE Numerical value not the formula.. WHATS THE ANSWER IN OHMS ?? Give answer as a Number NOT EQUATION 

DEGREE: ELECTRICAL ENGINEERING  SUBJECT/COURSE: AC CIRCUITS   NOTE: Please solve in this way.    1. Please have a good handwriting, some of the answers are not readable. Thank you! 2. GIVEN.(include symbols and units) 3. REQUIRED/FIND/MISSING (with symbol/s) 4. ILLUSTRATION (Required). 5. STEP-by-STEP SOLUTION with Formulas and Symbols. No Shortcut, No skipping, and detailed as possible 6. FINAL ANSWERS must be rounded up to three decimal places   PROBLEM: • An abc-phase sequence three-phase balanced wye-connected source supplies a balanced delta-connected load. The impedance per phase of the delta load is 10+j8 Ω. If the line impedance is zero and the line current in a phase is known to be la=28.10<-28.66° Arms, find the load voltage Vab.

DEGREE: ELECTRICAL ENGINEERING  SUBJECT/COURSE: AC CIRCUITS   NOTE: Please solve in this way.    1. Please have a good handwriting, some of the answers are not readable. Thank you! 2. GIVEN.(include symbols and units) 3. REQUIRED/FIND/MISSING (with symbol/s) 4. ILLUSTRATION (Required). 5. STEP-by-STEP SOLUTION with Formulas and Symbols. No Shortcut, No skipping, and detailed as possible 6. FINAL ANSWERS must be rounded up to three decimal places   PROBLEM: • A 300V(line) 3-phase supply feeds a star-connected load consisting of non-inductive resistors of 15, 6 and 10Ω connected to the R, Y and B lines, respectively. The phase sequence is RYB. Calculate the voltage across each resistor.

DEGREE: ELECTRICAL ENGINEERING  SUBJECT/COURSE: AC CIRCUITS   NOTE: Please solve in this way.    1. Please have a good handwriting, some of the answers are not readable. Thank you! 2. GIVEN.(include symbols and units) 3. REQUIRED/FIND/MISSING (with symbol/s) 4. ILLUSTRATION (Required). 5. STEP-by-STEP SOLUTION with Formulas and Symbols. No Shortcut, No skipping, and detailed as possible 6. FINAL ANSWERS must be rounded up to three decimal places   PROBLEM: • The apparent power input to a balanced wye connected load is 30kVA and the corresponding true power is 15kW at 45.45A. What is the phase voltage?

DEGREE: ELECTRICAL ENGINEERING  SUBJECT/COURSE: AC CIRCUITS   NOTE: Please solve in this way.    1. Please have a good handwriting, some of the answers are not readable. Thank you! 2. GIVEN.(include symbols and units) 3. REQUIRED/FIND/MISSING (with symbol/s) 4. ILLUSTRATION (Required). 5. STEP-by-STEP SOLUTION with Formulas and Symbols. No Shortcut, No skipping, and detailed as possible 6. FINAL ANSWERS must be rounded up to three decimal places   PROBLEM: • A Y-connected load is supplied from a 400V, 3 -phase, 3-wire symmetrical system RYB. The branch circuit impedances are ZR=10V3+j10; Zy=20+j20v3 ZB=0-j10 Determine the current in each branch. Phase sequence is RYB.

DEGREE: ELECTRICAL ENGINEERING  SUBJECT/COURSE: AC CIRCUITS   NOTE: Please solve in this way.    1. Please have a good handwriting, some of the answers are not readable. Thank you! 2. GIVEN.(include symbols and units) 3. REQUIRED/FIND/MISSING (with symbol/s) 4. ILLUSTRATION (Required). 5. STEP-by-STEP SOLUTION with Formulas and Symbols. No Shortcut, No skipping, and detailed as possible 6. FINAL ANSWERS must be rounded up to three decimal places   PROBLEM: • Calculate the total power when three identical resistances each of 10Ω are connected wye when connected across 220V, 3-phase, 60Hz source.

DEGREE: ELECTRICAL ENGINEERING  SUBJECT/COURSE: AC CIRCUITS   NOTE: Please solve in this way.    1. Please have a good handwriting, some of the answers are not readable. Thank you! 2. GIVEN.(include symbols and units) 3. REQUIRED/FIND/MISSING (with symbol/s) 4. ILLUSTRATION (Required). 5. STEP-by-STEP SOLUTION with Formulas and Symbols. No Shortcut, No skipping, and detailed as possible 6. FINAL ANSWERS must be rounded up to three decimal places   PROBLEM: • A 400V, 3-phase, 4 wire, star-connected system supplies three resistive loads of 15kW, 20kW and 25kW in the red, yellow and blue phases respectively. Determine the current flowing in each of the four conductors.

DEGREE: ELECTRICAL ENGINEERING  SUBJECT/COURSE: AC CIRCUITS   NOTE: Please solve in this way.    1. Please have a good handwriting, some of the answers are not readable. Thank you! 2. GIVEN.(include symbols and units) 3. REQUIRED/FIND/MISSING (with symbol/s) 4. ILLUSTRATION (Required). 5. STEP-by-STEP SOLUTION with Formulas and Symbols. No Shortcut, No skipping, and detailed as possible 6. FINAL ANSWERS must be rounded up to three decimal places   PROBLEM: • Three inductive loads, each of resistance 4Ω and reactance 9Ω are connected in delta. When connected to a 3-phase supply the loads consume 1.2kW. Calculate: (a) the power factor ofthe load, (b)the phase current and the line current, and  (c) the supply voltage.

DEGREE: ELECTRICAL ENGINEERING  SUBJECT/COURSE: AC CIRCUITS   NOTE: Please solve in this way.    1. Please have a good handwriting, some of the answers are not readable. Thank you! 2. GIVEN.(include symbols and units) 3. REQUIRED/FIND/MISSING (with symbol/s) 4. ILLUSTRATION (Required). 5. STEP-by-STEP SOLUTION with Formulas and Symbols. No Shortcut, No skipping, and detailed as possible 6. FINAL ANSWERS must be rounded up to three decimal places   PROBLEM: • A 3-phase, 4-wire, 380V supply is connected to an unbalanced load having phase impedances of ZR=(8+j6)Ω, Zr=(8-j6)Ω and ZB=5 Ω. Impedance of the neutral wire is ZN=(0.5+j1)Ω. Ignoring the impedances ofline wires and internal impedances of the emf sources, find the phase currents and voltages of the load.

DEGREE: ELECTRICAL ENGINEERING  SUBJECT/COURSE: AC CIRCUITS   NOTE: Please solve in this way.    1. Please have a good handwriting, some of the answers are not readable. Thank you! 2. GIVEN.(include symbols and units) 3. REQUIRED/FIND/MISSING (with symbol/s) 4. ILLUSTRATION (Required). 5. STEP-by-STEP SOLUTION with Formulas and Symbols. No Shortcut, No skipping, and detailed as possible 6. FINAL ANSWERS must be rounded up to three decimal places   PROBLEM: • A star-connected load consists of three identical coils, each of inductance 159.2mH and resistance 50Ω. If the supply frequency is 50Hz and the line current is 3A determine: (a) the phase voltage and (b) the line voltage.

DEGREE: ELECTRICAL ENGINEERING  SUBJECT/COURSE: AC CIRCUITS   NOTE: Please solve in this way.    1. Please have a good handwriting, some of the answers are not readable. Thank you! 2. GIVEN.(include symbols and units) 3. REQUIRED/FIND/MISSING (with symbol/s) 4. ILLUSTRATION (Required). 5. STEP-by-STEP SOLUTION with Formulas and Symbols. No Shortcut, No skipping, and detailed as possible 6. FINAL ANSWERS must be rounded up to three decimal places   PROBLEM: • In a balanced three-phase delta-delta system, the source has an abc-phase sequence. The phase angle for the source voltage is <Vab=40° and lab=4<15°Arms . If the total power absorbed by the load is 1400W, find the load impedance.

DEGREE: ELECTRICAL ENGINEERING  SUBJECT/COURSE: AC CIRCUITS   NOTE: Please solve in this way.    1. Please have a good handwriting, some of the answers are not readable. Thank you! 2. GIVEN.(include symbols and units) 3. REQUIRED/FIND/MISSING (with symbol/s) 4. ILLUSTRATION (Required). 5. STEP-by-STEP SOLUTION with Formulas and Symbols. No Shortcut, No skipping, and detailed as possible 6. FINAL ANSWERS must be rounded up to three decimal places   PROBLEM: • Three non-inductive resistances of 5,10 and 15Ω are connected in star and supplied from a 230V symmetrical 3-phase system. Calculate the line currents (magnitudes).

DEGREE: ELECTRICAL ENGINEERING  SUBJECT/COURSE: AC CIRCUITS   NOTE: Please solve in this way.    1. Please have a good handwriting, some of the answers are not readable. Thank you! 2. GIVEN.(include symbols and units) 3. REQUIRED/FIND/MISSING (with symbol/s) 4. ILLUSTRATION (Required). 5. STEP-by-STEP SOLUTION with Formulas and Symbols. No Shortcut, No skipping, and detailed as possible 6. FINAL ANSWERS must be rounded up to three decimal places   PROBLEM: • In a balanced three-phase wye-delta system, the source has an abc-phase sequence and Van=120<40° Vrms. The line and load impedance are 0.5+j0.4 Ω and 24+j18 Ω, respectively. Find the delta currents in the load.

DEGREE: ELECTRICAL ENGINEERING  SUBJECT/COURSE: AC CIRCUITS   NOTE: Please solve in this way.    1. Please have a good handwriting, some of the answers are not readable. Thank you! 2. GIVEN.(include symbols and units) 3. REQUIRED/FIND/MISSING (with symbol/s) 4. ILLUSTRATION (Required). 5. STEP-by-STEP SOLUTION with Formulas and Symbols. No Shortcut, No skipping, and detailed as possible 6. FINAL ANSWERS must be rounded up to three decimal places   PROBLEM: • A delta-connected load whose phase impedances are ZAB=50 Ω, ZBc=-j50 Ω, and ZcA=j50Ω is fed by a balanced wye-connected three phase source with Vp=100 V. Find the phase currents.

DEGREE: ELECTRICAL ENGINEERING  SUBJECT/COURSE: AC CIRCUITS   NOTE: Please solve in this way.    1. Please have a good handwriting, some of the answers are not readable. Thank you! 2. GIVEN.(include symbols and units) 3. REQUIRED/FIND/MISSING (with symbol/s) 4. ILLUSTRATION (Required). 5. STEP-by-STEP SOLUTION with Formulas and Symbols. No Shortcut, No skipping, and detailed as possible 6. FINAL ANSWERS must be rounded up to three decimal places   PROBLEM: • A positive-sequence balanced three-phase wye-connected source with a phase voltage of 120 V supplies power to balanced wye-connected load. The per phase load impedance is 40+j10Ω. Determine the line currents in the circuit if <Van=0°.

DEGREE: ELECTRICAL ENGINEERING  SUBJECT/COURSE: AC CIRCUITS   NOTE: Please solve in this way.    1. Please have a good handwriting, some of the answers are not readable. Thank you! 2. GIVEN.(include symbols and units) 3. REQUIRED/FIND/MISSING (with symbol/s) 4. ILLUSTRATION (Required). 5. STEP-by-STEP SOLUTION with Formulas and Symbols. No Shortcut, No skipping, and detailed as possible 6. FINAL ANSWERS must be rounded up to three decimal places   PROBLEM: • The phase b line voltage and phase a line current of a balanced three phase system are V = 220sin(wt+210°)V and I＝10sin(wt-30°)A respectively. What is the power of the system?

DEGREE: ELECTRICAL ENGINEERING  SUBJECT/COURSE: AC CIRCUITS   NOTE: Please solve in this way.    1. Please have a good handwriting, some of the answers are not readable. Thank you! 2. GIVEN.(include symbols and units) 3. REQUIRED/FIND/MISSING (with symbol/s) 4. ILLUSTRATION (Required). 5. STEP-by-STEP SOLUTION with Formulas and Symbols. No Shortcut, No skipping, and detailed as possible 6. FINAL ANSWERS must be rounded up to three decimal places   PROBLEM: • An abc-phase sequence three-phase balanced wye-connected source supplies power to a balanced delta-connected load. The impedance per phase in the load is 14+j12 Ω. If the source voltage for a phase is Van=120<80° Vms, and the line impedance is zero, find the phase currents in the wye-connected source.

DEGREE: ELECTRICAL ENGINEERING  SUBJECT/COURSE: AC CIRCUITS   NOTE: Please solve in this way.    1. Please have a good handwriting, some of the answers are not readable. Thank you! 2. GIVEN.(include symbols and units) 3. REQUIRED/FIND/MISSING (with symbol/s) 4. ILLUSTRATION (Required). 5. STEP-by-STEP SOLUTION with Formulas and Symbols. No Shortcut, No skipping, and detailed as possible 6. FINAL ANSWERS must be rounded up to three decimal places   PROBLEM: • A 3 phase, 4-wire, 400V symmetrical system supplies a Y-connected load having the following branch impedances: ZR=100 Ω, Zy=j10Ω and ZB=j10Ω Compute the values of load phase voltages and currents and neutral current. Phase sequence is RYB. How will these values change in the event of an open in the neutral wire?

DEGREE: ELECTRICAL ENGINEERING  SUBJECT/COURSE: AC CIRCUITS   NOTE: Please solve in this way.    1. Please have a good handwriting, some of the answers are not readable. Thank you! 2. GIVEN.(include symbols and units) 3. REQUIRED/FIND/MISSING (with symbol/s) 4. ILLUSTRATION (Required). 5. STEP-by-STEP SOLUTION with Formulas and Symbols. No Shortcut, No skipping, and detailed as possible 6. FINAL ANSWERS must be rounded up to three decimal places   PROBLEM: • In a three-phase balanced delta-delta system, the source has an abc-phase sequence. The line and load impedances are 0.3+j0.2 Ω and 9+j6 Ω, respectively. If the load current in the delta is IAB=15<40°Ams, find the phase voltages of the source.