2) A digital computer has a memory unit with 32 pits per word. The instruction set consists of 102 different operations. All instructions have an operation code part (opcode) and two address fields: one for a memory address and one for a register address. This system includes eight general-purpose, user-addressable registers. Registers may be loaded directly from memory, and memory may be updated directly from the registers. Direct memory-to-memory data movement operations are not supported. Each instruction is stored in one word of memory. a) How many bits are needed for the opcode? b) How many bits are needed to specify the register? c) How many bits are left for the memory address part of the instruction? d) What is the maximum allowable size for memory? e) What is the largest unsigned binary number that can be accommodated in one word of memory?

2) A digital computer has a memory unit with 32 pits per word. The instruction set consists of 102 different operations. All instructions have an operation code part (opcode) and two address fields: one for a memory address and one for a register address. This system includes eight general-purpose, user-addressable registers. Registers may be loaded directly from memory, and memory may be updated directly from the registers. Direct memory-to-memory data movement operations are not supported. Each instruction is stored in one word of memory. a) How many bits are needed for the opcode? b) How many bits are needed to specify the register? c) How many bits are left for the memory address part of the instruction? d) What is the maximum allowable size for memory? e) What is the largest unsigned binary number that can be accommodated in one word of memory?

Name: 2) A digital computer has a memory unit with 32 pits per word. The in
Uploaded: 2024-03-20T06:51:23.000Z
Channel: Bartleby
Description: 2) A digital computer has a memory unit with 32 pits per word. The instruction set consists of 102different operations. All instructions have an operation code part (opcode) and two address fields:one for a memory address and one for a register addr

Systems Architecture

7th Edition

ISBN:9781305080195

Author:Stephen D. Burd

Publisher:Stephen D. Burd

Chapter4: Processor Technology And Architecture

Section: Chapter Questions

Problem 2PE: If a microprocessor has a cycle time of 0.5 nanoseconds, what’s the processor clock rate? If the...

See similar textbooks

Similar questions

_____ is a CPU design technique in which instruction execution is divided into multiple stages and different instructions can execute in different stages simultaneously.
6. Assume that two numbers: dividend and divisor are saved in memory address M1 and M2 respectively. Quotient and remainder should be saved in R1 and R2 respectively. Write assembly language instructions and then list microoperations for each instruction and list the control signals required to be activated for each microoperation. MBR is used as buffer for any register to register transfer operation. Signal Description: Control signals operation Comments C0 MAR to RAM (through address bus) C1 PC to MBR C2 PC to MAR C3 MBR to PC C4 MBR to IR C5 RAM to MBR C6 MBR to ALU C7 Accumulator to ALU C8 IR to MAR C9 ALU to Accumulator C10 MBR to Accumulator C11 Accumulator to MBR C12 MBR to RAM (through data bus) C13 IR to Control Unit C14 MBR to R1 C15 MBR to R2 C16 MBR to R3 C17 MBR to R4…
Consider a Computer which has a memory which is capable of storing 4096 K words and each word in memory can be of size 32 bits. The computer supports a total of 6 addressingmodes, and it has 60 computer registers. The computer supports instructions, where each instruction consists of following fields: Mode Operation code Register Register Memory AddressGiven that each instruction will be stored in one memory word, discuss with a suitable diagram the format of instruction by specifying number of bits for each field of instruction. Discuss each field of instruction.
Consider a computer which has a memory which is capable of storing 4096 K words and each word in memory can be of size 32 bits. The computer supports a total of “8” addressing modes, and it has “50” computer registers. The computer supports instructions, where each instruction consists of following fields: Mode Operation code Register Register Memory Address Given that each instruction will be stored in one memory word, discuss with a suitable diagram the format of instruction by specifying number of bits for each field of instruction. Discuss each field of instruction
Q.1. A computer uses a memory unit with 1024 K words of 32 bits each (as shown in the figure below). A binary instruction code is stored in one word of memory. The instruction has four parts: an indirect bit, an operation code, a register code part to specify one of 64 registers, and an address part (15). How many bits are there in the operation code, the register code part, and the address part? Draw the instruction word format and indicate the number of bits in each part? How many bits are there in the data and address inputs of the memory?
Question 15 kk .Consider a microprocessor system where the processor has a 16-bit data bus and a 20-bit address bus. Determine (in bytes) the maximum size of the bit-addressable memory that can be connected to this processor. In continuation to the previous exercise, now consider a byte-addressable memory with a 32-bit address bus. What is the maximum memory size (in bytes) that can be accessed? Full explain this question and text typing work only We should answer our question within 2 hours takes more time then we will reduce Rating Dont ignore this line
i want all the staps Consider a computer which has a memory which is capable of storing 4096 K words and each word in memory can be of size 32 bits. The computer supports a total of "6" addressing modes, and it has “50" computer registers. The computer supports instructions, where each instruction consists of following fields: • Mode • Operation code • Register • Register • Memory Address Given that each instruction will be stored in one memory word, discuss with a suitable diagram the format of instruction by specifying number of bits for each field of instruction. Discuss each field of instruction
Suppose a machine has word length of 32 bits, and the CPU has 32 registers of 32 bits. Design an instruction system with 64 operations. (1) If it uses register addressing mode and the direct addressing mode in the instruction, what is the maximum main memory space that can be addressed? (2) What are the differences between the based index addressing and index addressing? (3) Introduce at least three of other addressing methods that can be used.
The rationale behind the inclusion of cache memory in computer systems is not clear to me, given that transistors are utilised in the construction of both random access memory (RAM) and read-only memory (ROM).Temporary storage can be conceptualised as a transiently available form of RAM (random access memory). Can one envision a computing device that solely relies on a single type of memory?
Consider a word-addressable computer with 32 bits per word. The instruction set consists of 30 different All instructions have an operation code field, a mode field to specify one of 7 possible addressing modes, a register address field to specify one of 60 available registers, and a memory address field. Each instruction is stored in one word of memory. What is the maximum allowable size for memory? Use KB, MB, or GB as a unit.
We want to build a byte organized main memory of 8 GB for a 32-bit CPU architecture composed ofbyte organized memory modules of 30-bit address and 8-bit data buses each.a) Draw the interface of the main memory by clearly indicating the widths of the buses.b) How many memory modules would be necessary to build the memory system?c) Design the main memory internal organization built out of the above memory modules (usemultiplexers and/or decoders as needed) by clearly indicating the widths of the used bussesd) Can we use this memory system as RAM for the CPU in Problem 1? Explain your answer.
2. This question is about Digital Logic and Address DecodingA computer is being designed using a microprocessor with a 16-bit address bus (A0—A15, where A0 is the least significant bit). The 64K address space is to be split betweenand allocated to RAM, ROM and I/O hardware as follows:Address Range (hex) Contains Select Signal0x0000 — 0x1FFF Main RAM RAMCS0x8000 — 0x9FFF Video RAM VRAMCS0xB000 — 0xBFFF I/O hardware IOCS0xC000 — 0xCFFF BASIC ROM BROMCS0xF000 — 0xFFFF OS ROM OSROMCSThe rest of the address space is unused.Note: As with many computer systems, it its only necessary to decode addresses to sufficiently identify each of the sections above uniquely. It is acceptable for some parts to be decodeable by more than one address provided these extra addresses do not overlap any of the other specified address ranges. Using a combination of AND, OR and NOT gates and the signals (A12 — A15) that contain the top four bits of the address in binary form: a. Derive the equation for a logic…